--- title: "SunEvo Solar SE6-60HBD-600 Solar Panel: Specs & Datasheet | ComparePV" description: "SunEvo Solar SE6-60HBD-600 solar panel. Specs: 21.20% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/sunevo-solar-se6-60hbd-600" image: "https://comparepv.com/og/panel/sunevo-solar-se6-60hbd-600.png" updated: 2026-09-11 --- # SunEvo Solar SE6-60HBD-600 Middle of its segment, weak in heat 217 panels in the segment PERC 600-650 W ## Identity - **Manufacturer:** SunEvo Solar - **Model:** SE6-60HBD-600 - **Series:** EVO 6 SE6-60H / SE6-60HBD - **Rated power:** 600 W - **Cell technology:** PERC - **Bifacial:** yes ## How it compares Compared against segment PERC 600-650 W (217 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 600 W | 605 W | Weak - bottom 16% | | | Module efficiency | 21.20% | 21.38% | Typical | 9,145 | | Power density | 212.0 | 213.8 | Typical | 9,164 | | Temperature coefficient | -0.360 | -0.340 | Weak - bottom 6% | 12,425 | | Weight (kg) | 34.8 kg | 34.0 kg | Typical | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 21.20% | 21.38% | Typical | 9,145 | | Power density | 212.0 | 213.8 | Typical | 9,164 | | Temperature coefficient | -0.360 | -0.340 | Weak - bottom 6% | 12,425 | | Weight per kWp | 58.0 | 55.7 | Typical | 11,596 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Watch out for - **-0.360 %/°C temperature coefficient** - Bottom 6% of the PERC 600-650 W segment, against a median of -0.340. Ranked 12,425th in the whole database. - **Best for:** Residential, utility-scale and shaded-installations. - **Not ideal for:** Hot climates. ## Specification ### Electrical - **Rated power (Pmax):** 600 W - **Efficiency:** 21.20 % - **Voltage at Pmax (Vmp):** 34.55 V - **Current at Pmax (Imp):** 17.37 A - **Open-circuit voltage (Voc):** 41.64 V - **Short-circuit current (Isc):** 18.46 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.360 %/degC - **Temperature coefficient of Voc:** -0.280 %/degC - **Temperature coefficient of Isc:** 0.050 %/degC - **NOCT:** 43 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** PERC - **Cell count:** 120 - **Bifacial:** yes - **Bifacial gain:** 25.00 ### Physical - **Length:** 2172 mm - **Width:** 1303 mm - **Thickness:** 35 mm - **Weight:** 34.8 kg - **Area:** 2.83 m2 - **Power density:** 212.0 Wp/m2 ### Warranty and degradation - **Product warranty:** 12 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 85.0 % - **First-year degradation:** 2.00 % - **Annual degradation:** 0.45 % - **Output after 30 years:** 510 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 9145 of 14129 | | Power density | 9164 of 14129 | | Temperature coefficient | 12425 of 14129 | | Weight | 11596 of 14129 | | Warranty | 21 of 14129 | ## About this series The SunEvo Solar EVO 6 series, including the SE6-60H and bifacial SE6-60HBD models, is a technologically advanced solution based on M10 silicon wafers, which significantly increases power density while maintaining standard module dimensions. The use of **Half-Cut cell technology** in combination with the Multi-Busbar (MBB) system allows for a drastic reduction in energy losses and improves module performance in partial shading conditions. The **SE6-60HBD bifacial version** is the ideal response to the needs of investors seeking maximum yield from the surface area, utilizing radiation reflected from the ground to increase total electricity production. These panels effectively solve the problem of component degradation thanks to **certified resistance to the PID phenomenon** and high durability against snow and wind loads. The EVO 6 series is designed for both modern home micro-installations and large photovoltaic farms, where a low Levelized Cost of Energy (LCOE) is key. Compared to the competition, these modules stand out with an **optimized thermal profile**, ensuring high efficiency even on hot days, making them a solid foundation for any long-term investment in renewable energy sources in Poland. ## Notable figures - At 21.2% efficiency, this panel is on par with typical \*\*PERC 600-650W\*\* modules - Power density of 212.0 W/m² matches the \*\*PERC 600-650W\*\* median - Temperature coefficient of -0.36%/°C matches the \*\*PERC 600-650W\*\* median - 70% bifaciality enables rear-side power generation, boosting yield by 4-10% on reflective surfaces - #9145 for efficiency, #12425 for temperature performance out of 14129 panels ## Questions ### What is the maximum power output of the SunEvo Solar EVO 6 panels and what drives it? The SunEvo Solar EVO 6 series reaches up to 615 Wp thanks to the combination of PERC cells on M10 silicon wafers (182×182 mm) with half-cut cell technology and a Multi-Busbar (MBB) system. M10 wafers offer a larger active area than older formats, while splitting each cell in half reduces series resistance and thermal losses, delivering higher power density within standard module dimensions. ### What warranty does the SunEvo Solar EVO 6 SE6-60H / SE6-60HBD series carry? SunEvo Solar provides a 12-year product warranty covering material and workmanship defects, and a 30-year linear power warranty. This means the manufacturer guarantees a minimum energy output level for three decades. This is a solid tier for a mid-range module designed for long-term deployments in both residential rooftop systems and utility-scale PV plants. ### How does the bifacial SE6-60HBD differ from the standard SE6-60H? The SE6-60HBD is a bifacial module - both surfaces actively collect irradiance. The rear side harvests light reflected from the ground (light-colored gravel, concrete, or snow), increasing total energy yield by several to over ten percent depending on surface albedo. The monofacial SE6-60H collects energy from the front only - it costs less and performs well on standard rooftops where ground reflection cannot be utilized. ### Are EVO 6 panels PID-resistant, and why does that matter for long-term yield? Yes, the EVO 6 series carries certified PID (Potential Induced Degradation) resistance - a form of accelerated cell degradation caused by high system voltage combined with humidity and heat. In practice, this means the modules maintain efficiency in large DC systems operating above 1,000 V and retain their rated parameters throughout the full 30-year power warranty period, directly protecting the return on investment. ### Will the SunEvo Solar EVO 6 series perform well in Central European climate conditions - summer heat and heavy winter snow loads? Yes. The EVO 6 series is engineered for demanding weather conditions: the manufacturer declares high mechanical resistance to snow and wind loads, while the optimized thermal profile with a low temperature coefficient limits power loss on hot days. Half-cut cell technology also improves resilience against partial shading typical of low winter sun angles or partial panel icing. ### Which installation types are SunEvo Solar EVO 6 modules best suited for - residential rooftops or utility-scale PV farms? The EVO 6 series is designed with both scenarios in mind. High unit power up to 615 Wp and a low LCOE make it attractive for utility-scale developers. At the same time, standard module dimensions and PID resistance make it a viable choice for residential microinstallations. The bifacial SE6-60HBD variant is especially recommended for ground-mounted systems with high-albedo surfaces, where reflected irradiance boosts yield at no additional cost. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/PDF-c45cb6f54002.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [AIKO AIKO-A650-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a650-mae72mw) | 650 W | Cooler, lighter, +4.0 pp | | [AIKO AIKO-A645-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a645-mae72mw) | 645 W | Cooler, lighter, +3.8 pp | | [Longi Solar LR7-60HVH-560M](https://comparepv.com/panel/longi-lr7-60hvh-560m) | 560 W | Cooler, lighter, +3.6 pp | | [AIKO AIKO-A640-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a640-mae72mw) | 640 W | Cooler, lighter, +3.6 pp | | [Longi Solar LR7-60HVH-555M](https://comparepv.com/panel/longi-lr7-60hvh-555m) | 555 W | Cooler, lighter, +3.4 pp | | [AIKO AIKO-A635-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a635-mae72mw) | 635 W | Cooler, lighter, +3.4 pp | | [SunEvo Solar SE6-60HBD-590](https://comparepv.com/panel/sunevo-solar-se6-60hbd-590) | 590 W | -10 W, -0.4 pp | | [SunEvo Solar SE6-60H-595](https://comparepv.com/panel/sunevo-solar-se6-60h-595) | 595 W | Very close match | | [SunEvo Solar SE6-60H-605](https://comparepv.com/panel/sunevo-solar-se6-60h-605) | 605 W | Very close match | | [SunEvo Solar SE6-60H-610](https://comparepv.com/panel/sunevo-solar-se6-60h-610) | 610 W | +10 W, +0.4 pp | | [SunEvo Solar SE6-60H-615](https://comparepv.com/panel/sunevo-solar-se6-60h-615) | 615 W | +15 W, +0.5 pp | | [Gamko New Energy GKA210N120](https://comparepv.com/panel/gamko-new-energy-gka210n120) | 680 W | +80 W, lighter, +2.8 pp | | [Gamko New Energy GKA210N120-675](https://comparepv.com/panel/gamko-new-energy-gka210n120-675) | 675 W | +75 W, lighter, +2.7 pp | | [Q-SUN Solar QN-670HJT-01](https://comparepv.com/panel/q-sun-solar-qn-670hjt-01) | 670 W | +70 W, cooler, +2.5 pp | | [Gamko New Energy GKA210N120-670](https://comparepv.com/panel/gamko-new-energy-gka210n120-670) | 670 W | +70 W, lighter, +2.5 pp | | [Q-SUN Solar QN-665HJT-01](https://comparepv.com/panel/q-sun-solar-qn-665hjt-01) | 665 W | +65 W, cooler, +2.3 pp | --- Source: https://comparepv.com/panel/sunevo-solar-se6-60hbd-600 Not in this file, on the page: the I-V and temperature curves lifted from the manufacturer's datasheet, a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.