--- title: "SunEvo Solar SE5-54HBD-450W 450W Solar Panel - Specs & Review | ComparePV" description: "SunEvo Solar SE5-54HBD-450W 450W solar panel. Specs: 23.04% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/sunevo-solar-se5-54hbd-450w" updated: 2026-09-11 --- # SunEvo Solar SE5-54HBD-450W Space saver, heavy for its output 83 panels in the segment HJT 450-500 W ## Identity - **Manufacturer:** SunEvo Solar - **Model:** SE5-54HBD-450W - **Series:** SE5-54HBD - **Rated power:** 450 W - **Cell technology:** HJT - **Bifacial:** yes ## How it compares Compared against segment HJT 450-500 W (83 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 450 W | 460 W | Weak - bottom 14% | | | Module efficiency | 23.04% | 22.77% | Strong - top 16% | 1,711 | | Power density | 230.4 | 227.7 | Strong - top 15% | 1,708 | | Temperature coefficient | -0.260 | -0.240 | Weak - bottom 22% | 511 | | Weight (kg) | 23.5 kg | 23.0 kg | Weak - bottom 12% | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 23.04% | 22.77% | Strong - top 16% | 1,711 | | Power density | 230.4 | 227.7 | Strong - top 15% | 1,708 | | Temperature coefficient | -0.260 | -0.240 | Weak - bottom 22% | 511 | | Weight per kWp | 52.2 | 49.3 | Weak - bottom 12% | 5,684 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Strengths - **230.4 watts per square metre** - Top 15% of the HJT 450-500 W segment, against a median of 227.7. - **23.04% module efficiency** - Top 16% of the HJT 450-500 W segment, against a median of 22.77%. ### Watch out for - **52.2 kg per kWp** - Bottom 12% of the HJT 450-500 W segment, against a median of 49.3. - **-0.260 %/°C temperature coefficient** - Bottom 22% of the HJT 450-500 W segment, against a median of -0.240. - **Best for:** Residential, commercial and hot-climate. - **Not ideal for:** Weight-limited structures and hot climates. ## Specification ### Electrical - **Rated power (Pmax):** 450 W - **Efficiency:** 23.04 % - **Voltage at Pmax (Vmp):** 34.51 V - **Current at Pmax (Imp):** 13.04 A - **Open-circuit voltage (Voc):** 41.34 V - **Short-circuit current (Isc):** 13.50 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.260 %/degC - **Temperature coefficient of Voc:** -0.240 %/degC - **Temperature coefficient of Isc:** 0.040 %/degC - **NOCT:** 44 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** HJT - **Cell count:** 108 - **Bifacial:** yes ### Physical - **Length:** 1722 mm - **Width:** 1134 mm - **Thickness:** 30 mm - **Weight:** 23.5 kg - **Area:** 1.95 m2 - **Power density:** 230.4 Wp/m2 ### Warranty and degradation - **Product warranty:** 25 years - **Performance warranty:** 30 years ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 1711 of 14005 | | Power density | 1708 of 14005 | | Temperature coefficient | 511 of 14005 | | Weight | 5684 of 14005 | | Warranty | 21 of 14005 | ## About this series The SunEvo Solar SE5-54HBD series is a range of modules designed for high performance in real-world conditions, even when the roof or ground is not perfectly sunlit. The use of N-type cells in the HJT technology and a bifacial design allows the panel to effectively utilize not only direct sunlight, but also reflected light from a bright surface, such as the ground, facade, or roof membrane. This results in more stable energy yields and a better return on investment. Compared to the competition, the **glass-glass** construction offers increased resistance to aging, micro-cracks, and harsh weather conditions, and the **bifacial** technology supports additional energy production. It is also worth noting the **low temperature coefficient**, which means the module loses less power during hot weather, and the **N-type HJT** cells, which are known for their excellent performance in low light. This is a good choice for residential and commercial installations, especially where durability, aesthetics, and long-term energy yield are important. ## Notable figures - At 23.0% efficiency, this panel is on par with typical \*\*HJT 450-500W\*\* modules - At 230.4 W/m² power density, roof space requirements are typical for \*\*HJT 450-500W\*\* panels - -0.26%/°C temperature coefficient - 0.02pp worse than \*\*HJT 450-500W\*\* median (-0.24%/°C), expect higher hot weather losses - Bifaciality factor of 90% can add 4-14% extra yield with reflective mounting surface - #1711 for efficiency, #511 for temperature performance out of 14005 panels ## Questions ### What is TOPCon cell technology in the SunEvo Solar SE5-54HBD, and how does it differ from older PERC cells? TOPCon (Tunnel Oxide Passivated Contact) is an N-type cell architecture that delivers higher conversion efficiency and a lower annual degradation rate than conventional PERC technology. In practice, the SE5-54HBD modules rated at up to 450 Wp perform better in low-light conditions — early morning, late afternoon, or overcast skies — and lose power more slowly over the full service life. It is a premium-tier technology adopted by leading manufacturers worldwide. ### Do the bifacial SE5-54HBD panels actually generate more energy from the rear side, and when does it make sense? Yes, the bifacial design of the SE5-54HBD allows the module to capture light reflected off the surface below through its rear glass. Real-world gains depend on surface albedo: a white roofing membrane, light gravel, concrete, or snow can add several to over ten percent of extra yield compared to a monofacial module of the same rated power. On a typical dark pitched roof the effect is minimal, but on ground-mount systems or reflective roofing the bifacial advantage pays off measurably. ### What warranty does the SunEvo Solar SE5-54HBD carry — product and power output? The SE5-54HBD series comes with a 25-year product warranty covering material and manufacturing defects, and a 30-year linear power output warranty. A 30-year power guarantee is among the longest currently available on the market, meaning the manufacturer commits to maintaining a specified minimum output level for three full decades. Before purchasing, confirm how the warranty is serviced in your country and who handles claims locally. ### Does the SE5-54HBD lose significant power output during hot summer days? N-type TOPCon cells have a low temperature coefficient, so the SE5-54HBD loses noticeably less power during heat waves than older PERC-based modules. This is a tangible advantage in real-world conditions where panel surface temperatures can reach 60–70 °C well above the STC reference of 25 °C. Better thermal stability translates directly into higher actual energy yield on the longest, sunniest days of the year. ### Is SunEvo Solar a reliable manufacturer, and what does the lack of Tier 1 status mean for my investment? SunEvo Solar is not listed as a Bloomberg NEF Tier 1 manufacturer, which matters primarily if you plan to finance the installation through a bank loan or leasing, as many lenders and insurers require Tier 1 panels. Tier 1 status reflects a manufacturer's financial creditworthiness, not panel quality per se. Before purchasing, review feedback from local installers and verify the warranty claim process in your market to properly assess the long-term investment risk. ### Is the SunEvo Solar SE5-54HBD series suitable for both residential and commercial installations? Yes, the SE5-54HBD is designed for both use cases. At 450 Wp with a glass-glass construction, it is well suited to large ground-mount and flat commercial rooftop systems where the bifacial design delivers measurable yield gains. For residential pitched-roof prosumer installations it is a strong choice where long-term durability, aesthetics, and predictable LCOE matter, particularly on reflective roofing membranes that enhance rear-side irradiance. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/Evo-5N-N-type-HJT-Bifacial-Dual-Glass-108-Half-Cells-430-450-772d6ed5b9b5.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [AIKO AIKO-A495-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a495-mce54mw) | 495 W | +45 W, lighter, +1.8 pp | | [AIKO AIKO-A490-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a490-mce54mw) | 490 W | +40 W, lighter, +1.5 pp | | [Longi Solar LR7-54HJD-500M](https://comparepv.com/panel/longi-lr7-54hjd-500m) | 500 W | +50 W, cooler, +1.5 pp | | [Talesun CIPRO-TN9C54M-500W](https://comparepv.com/panel/talesun-cipro-tn9c54m-500w) | 500 W | +50 W, lighter, +1.5 pp | | [Gokin GK-3-54HGb-500M](https://comparepv.com/panel/gokin-gk-3-54hgb-500m) | 500 W | +50 W, lighter, +1.5 pp | | [GCL GCL-NR10R/54BGDF](https://comparepv.com/panel/gcl-gcl-nr10r-54bgdf) | 500 W | +50 W, heavier, +1.5 pp | | [SunEvo Solar SE5-54H-400W](https://comparepv.com/panel/sunevo-solar-se5-54h-400w) | 400 W | -50 W, hotter, -2.5 pp | | [SunEvo Solar SE5-54H-405W](https://comparepv.com/panel/sunevo-solar-se5-54h-405w) | 405 W | Hotter, -2.3 pp, -5 yr warranty | | [SunEvo Solar SE5-54H-410W](https://comparepv.com/panel/sunevo-solar-se5-54h-410w) | 410 W | Hotter, -2.0 pp, -5 yr warranty | | [SunEvo Solar SE5-54H-415W](https://comparepv.com/panel/sunevo-solar-se5-54h-415w) | 415 W | Hotter, -1.7 pp, -5 yr warranty | | [SunEvo Solar SE5-54HBD-420](https://comparepv.com/panel/sunevo-solar-se5-54hbd-420) | 420 W | -30 W, hotter, -1.5 pp | | [Longi Solar LR7-54HJD-510M](https://comparepv.com/panel/longi-lr7-54hjd-510m) | 510 W | +60 W, cooler, +2.0 pp | | [Longi Solar LR7-54HJD-505M](https://comparepv.com/panel/longi-lr7-54hjd-505m) | 505 W | +55 W, cooler, +1.7 pp | --- Source: https://comparepv.com/panel/sunevo-solar-se5-54hbd-450w Not in this file, on the page: the I-V and temperature curves lifted from the manufacturer's datasheet, a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.