--- title: "SunEvo Solar SE5-54HBD-425W Solar Panel: Specs & Datasheet | ComparePV" description: "SunEvo Solar SE5-54HBD-425W solar panel. Specs: 21.76% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/sunevo-solar-se5-54hbd-425w" image: "https://comparepv.com/og/panel/sunevo-solar-se5-54hbd-425w.png" updated: 2026-09-11 --- # SunEvo Solar SE5-54HBD-425W Solid all-round for its segment 1,220 panels in the segment TOPCon 400-450 W ## Identity - **Manufacturer:** SunEvo Solar - **Model:** SE5-54HBD-425W - **Series:** SE5-54HBD - **Rated power:** 425 W - **Cell technology:** TOPCon - **Bifacial:** yes ## How it compares Compared against segment TOPCon 400-450 W (1220 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 425 W | 435 W | Typical | | | Module efficiency | 21.76% | 22.00% | Typical | 7,349 | | Power density | 217.6 | 220.2 | Typical | 7,235 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,220 | | Weight (kg) | 23.5 kg | 22.0 kg | Typical | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 21.76% | 22.00% | Typical | 7,349 | | Power density | 217.6 | 220.2 | Typical | 7,235 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,220 | | Weight per kWp | 55.3 | 51.5 | Typical | 9,828 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | - **Best for:** Residential, commercial and hot-climate. ## Specification ### Electrical - **Rated power (Pmax):** 425 W - **Efficiency:** 21.76 % - **Voltage at Pmax (Vmp):** 33.09 V - **Current at Pmax (Imp):** 12.85 A - **Open-circuit voltage (Voc):** 39.00 V - **Short-circuit current (Isc):** 13.62 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.290 %/degC - **Temperature coefficient of Voc:** -0.250 %/degC - **Temperature coefficient of Isc:** 0.045 %/degC - **NOCT:** 45 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** TOPCon - **Cell count:** 108 - **Bifacial:** yes ### Physical - **Length:** 1722 mm - **Width:** 1134 mm - **Thickness:** 30 mm - **Weight:** 23.5 kg - **Area:** 1.95 m2 - **Power density:** 217.6 Wp/m2 ### Warranty and degradation - **Product warranty:** 25 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 87.4 % - **Output after 30 years:** 371 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 7349 of 14129 | | Power density | 7235 of 14129 | | Temperature coefficient | 2220 of 14129 | | Weight | 9828 of 14129 | | Warranty | 21 of 14129 | ## About this series The SunEvo Solar SE5-54HBD series is a range of modules designed for high performance in real-world conditions, even when the roof or ground is not perfectly sunlit. The use of N-type cells in the HJT technology and a bifacial design allows the panel to effectively utilize not only direct sunlight, but also reflected light from a bright surface, such as the ground, facade, or roof membrane. This results in more stable energy yields and a better return on investment. Compared to the competition, the **glass-glass** construction offers increased resistance to aging, micro-cracks, and harsh weather conditions, and the **bifacial** technology supports additional energy production. It is also worth noting the **low temperature coefficient**, which means the module loses less power during hot weather, and the **N-type HJT** cells, which are known for their excellent performance in low light. This is a good choice for residential and commercial installations, especially where durability, aesthetics, and long-term energy yield are important. ## Notable figures - Efficiency of 21.8% matches the \*\*TOPCon 400-450W\*\* median - Power density of 217.6 W/m² matches the \*\*TOPCon 400-450W\*\* median - At -0.29%/°C, hot weather performance is typical for \*\*TOPCon 400-450W\*\* panels - At 23.5 kg (1.5 kg above \*\*TOPCon 400-450W\*\* median of 22.0 kg), requires checking roof load capacity - #7349 for efficiency, #2220 for temperature performance out of 14129 panels ## Questions ### What is TOPCon cell technology in the SunEvo Solar SE5-54HBD, and how does it differ from older PERC cells? TOPCon (Tunnel Oxide Passivated Contact) is an N-type cell architecture that delivers higher conversion efficiency and a lower annual degradation rate than conventional PERC technology. In practice, the SE5-54HBD modules rated at up to 450 Wp perform better in low-light conditions - early morning, late afternoon, or overcast skies - and lose power more slowly over the full service life. It is a premium-tier technology adopted by leading manufacturers worldwide. ### Do the bifacial SE5-54HBD panels actually generate more energy from the rear side, and when does it make sense? Yes, the bifacial design of the SE5-54HBD allows the module to capture light reflected off the surface below through its rear glass. Real-world gains depend on surface albedo: a white roofing membrane, light gravel, concrete, or snow can add several to over ten percent of extra yield compared to a monofacial module of the same rated power. On a typical dark pitched roof the effect is minimal, but on ground-mount systems or reflective roofing the bifacial advantage pays off measurably. ### What warranty does the SunEvo Solar SE5-54HBD carry - product and power output? The SE5-54HBD series comes with a 25-year product warranty covering material and manufacturing defects, and a 30-year linear power output warranty. A 30-year power guarantee is among the longest currently available on the market, meaning the manufacturer commits to maintaining a specified minimum output level for three full decades. Before purchasing, confirm how the warranty is serviced in your country and who handles claims locally. ### Does the SE5-54HBD lose significant power output during hot summer days? N-type TOPCon cells have a low temperature coefficient, so the SE5-54HBD loses noticeably less power during heat waves than older PERC-based modules. This is a tangible advantage in real-world conditions where panel surface temperatures can reach 60-70 °C well above the STC reference of 25 °C. Better thermal stability translates directly into higher actual energy yield on the longest, sunniest days of the year. ### Is SunEvo Solar a reliable manufacturer, and what does the lack of Tier 1 status mean for my investment? SunEvo Solar is not listed as a Bloomberg NEF Tier 1 manufacturer, which matters primarily if you plan to finance the installation through a bank loan or leasing, as many lenders and insurers require Tier 1 panels. Tier 1 status reflects a manufacturer's financial creditworthiness, not panel quality per se. Before purchasing, review feedback from local installers and verify the warranty claim process in your market to properly assess the long-term investment risk. ### Is the SunEvo Solar SE5-54HBD series suitable for both residential and commercial installations? Yes, the SE5-54HBD is designed for both use cases. At 450 Wp with a glass-glass construction, it is well suited to large ground-mount and flat commercial rooftop systems where the bifacial design delivers measurable yield gains. For residential pitched-roof prosumer installations it is a strong choice where long-term durability, aesthetics, and predictable LCOE matter, particularly on reflective roofing membranes that enhance rear-side irradiance. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/Evo-5N-N-type-TOPCon-108-Half-Cells-Bifacial-Dual-Glass-415-f621ec8f22a1.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [Maxeon SPR-MAX7-475](https://comparepv.com/panel/maxeon-spr-max7-475) | 475 W | +50 W, +2.2 pp, +10 yr warranty | | [Just Solar JST-EDMH-(445-465)W-TD (465W class)](https://comparepv.com/panel/just-solar-jst-edmh-445-465-w-td-465w-class) | 465 W | +40 W, lighter, +2.0 pp | | [JA Solar JAT54S40-475/LR](https://comparepv.com/panel/ja-solar-jat54s40-475-lr) | 475 W | +50 W, lighter, +2.0 pp | | [Tongwei TWMNH-48HW475](https://comparepv.com/panel/tongwei-solar-twmnh-48hw475) | 475 W | +50 W, +2.0 pp | | [Astronergy CHSM48RN(DG)/F-BH-475](https://comparepv.com/panel/astronergy-chint-new-energy-technology-co-ltd-chsm48rn-dg-f-bh-475) | 475 W | +50 W, heavier, +2.0 pp | | [AIKO AIKO-A475-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a475-mce54mw) | 475 W | +50 W, cooler, +2.0 pp | | [AIKO AIKO-A475-MAH54Mw](https://comparepv.com/panel/aiko-aiko-a475-mah54mw) | 475 W | +50 W, cooler, +2.0 pp | | [SunEvo Solar SE5-54H-400W](https://comparepv.com/panel/sunevo-solar-se5-54h-400w) | 400 W | Hotter, -1.3 pp, -5 yr warranty | | [SunEvo Solar SE5-54H-405W](https://comparepv.com/panel/sunevo-solar-se5-54h-405w) | 405 W | Hotter, -1.1 pp, -5 yr warranty | | [SunEvo Solar SE5-54H-410W](https://comparepv.com/panel/sunevo-solar-se5-54h-410w) | 410 W | Hotter, -0.8 pp, -5 yr warranty | | [SunEvo Solar SE5-54H-415W](https://comparepv.com/panel/sunevo-solar-se5-54h-415w) | 415 W | Hotter, lighter, -5 yr warranty | | [SunEvo Solar SE5-54HBD-420](https://comparepv.com/panel/sunevo-solar-se5-54hbd-420) | 420 W | -0.2 pp | | [Longi Solar LR7-54HJD-510M](https://comparepv.com/panel/longi-lr7-54hjd-510m) | 510 W | +85 W, cooler, +3.2 pp | | [AIKO AIKO-A495-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a495-mce54mw) | 495 W | +70 W, cooler, +3.0 pp | | [Longi Solar LR7-54HJD-505M](https://comparepv.com/panel/longi-lr7-54hjd-505m) | 505 W | +80 W, cooler, +2.9 pp | | [WINAICO WST-505BKX54-A2](https://comparepv.com/panel/winaico-wst-505bkx54-a2) | 505 W | +80 W, cooler, +2.9 pp | --- Source: https://comparepv.com/panel/sunevo-solar-se5-54hbd-425w Not in this file, on the page: the I-V and temperature curves lifted from the manufacturer's datasheet, a thirty-year output simulator and alternatives filtered by how closely they match these dimensions.