--- title: "Solarever SE-182*105-455M-96-BD 455W Solar Panel - Specs & Review | ComparePV" description: "Solarever SE-182*105-455M-96-BD 455W solar panel. Specs: 22.77% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/solarever-se-182-105-455m-96-bd" updated: 2026-09-25 --- # Solarever SE-182\*105-455M-96-BD Middle of its segment, weak in heat 1,089 panels in the segment TOPCon 450-500 W ## Identity - **Manufacturer:** Solarever - **Model:** SE-182\*105-455M-96-BD - **Series:** HC 96 - **Rated power:** 455 W - **Cell technology:** TOPCon - **Bifacial:** yes ## How it compares Compared against segment TOPCon 450-500 W (1089 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 455 W | 465 W | Typical | | | Module efficiency | 22.77% | 22.52% | Typical | 3,073 | | Power density | 227.7 | 225.2 | Typical | 2,888 | | Temperature coefficient | -0.300 | -0.290 | Weak - bottom 20% | 6,093 | | Weight (kg) | 23.0 kg | 24.0 kg | Typical | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 22.77% | 22.52% | Typical | 3,073 | | Power density | 227.7 | 225.2 | Typical | 2,888 | | Temperature coefficient | -0.300 | -0.290 | Weak - bottom 20% | 6,093 | | Weight per kWp | 50.5 | 52.2 | Typical | 3,925 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Watch out for - **-0.300 %/°C temperature coefficient** - Bottom 20% of the TOPCon 450-500 W segment, against a median of -0.290. - **Best for:** Residential, commercial, shaded-installations and cold-climate. - **Not ideal for:** Hot climates. ## Specification ### Electrical - **Rated power (Pmax):** 455 W - **Efficiency:** 22.77 % - **Voltage at Pmax (Vmp):** 30.26 V - **Current at Pmax (Imp):** 15.04 A - **Open-circuit voltage (Voc):** 35.21 V - **Short-circuit current (Isc):** 16.10 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.300 %/degC - **Temperature coefficient of Voc:** -0.250 %/degC - **Temperature coefficient of Isc:** 0.046 %/degC - **NOCT:** 41 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** TOPCon - **Cell count:** 96 - **Bifacial:** yes - **Bifacial gain:** 25.00 ### Physical - **Length:** 1762 mm - **Width:** 1134 mm - **Thickness:** 30 mm - **Weight:** 23.0 kg - **Area:** 2.00 m2 - **Power density:** 227.7 Wp/m2 ### Warranty and degradation - **Product warranty:** 15 years - **Performance warranty:** 30 years - **First-year degradation:** 1.00 % - **Annual degradation:** 0.40 % - **Output after 30 years:** 398 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 3073 of 14005 | | Power density | 2888 of 14005 | | Temperature coefficient | 6093 of 14005 | | Weight | 3925 of 14005 | | Warranty | 21 of 14005 | ## Pros - **Efficiency matching segment leaders** - Peak efficiency of 23.52% ties Recom Lynx and exceeds Trina Vertex S+ (23.5%) and Astronergy ASTRO N7s 2.0 (23.5%), placing the HC 96 series at the very top of the compared TOPCon models. - **N-type TOPCon cells in half-cut design** - 96 half-cut monocrystalline cells reduce resistive losses and improve performance under partial shading, while N-type TOPCon technology delivers lower LID/LETID degradation than older PERC cells. - **Dual 15/30-year warranty** - A 15-year product warranty combined with a 30-year linear power warranty (87.4% of nominal power retained) matches or exceeds most tier-1 manufacturers, many of which still cap warranties at 25 years. - **Bifacial design with dual glass** - Bifacial construction paired with dual tempered glass enables additional rear-side energy yield while improving mechanical durability and moisture resistance compared to backsheet-based modules. - **High power density in a compact footprint** - Up to 470 Wp within roughly 2.0 m² (1762×1134 mm) gives a competitive power density, reducing mounting structure and BoS requirements per kWp installed. ## Cons - **No confirmed BNEF Tier 1 status** - Unlike peer manufacturer Trina Solar (Tier 1), Solarever does not appear on the BNEF Tier 1 solar module methodology list for 2026, which can be a significant factor for bank-financed commercial and utility-scale PV projects. ## About this series The Solarever HC 96 series is a line of photovoltaic modules built on 96 half-cut monocrystalline cells, which reduces current losses and improves panel performance under partial shading conditions. The **half-cut technology** combined with **PERC cells** results in more stable energy production even under lower irradiance, which matters both for residential installations and larger commercial systems. The panels use a **bifacial design**, allowing the rear side of the module to also generate energy from light reflected off the ground or roof surface, increasing total yield without expanding the installation footprint. In addition, versions with **dual glass** construction and a full black frame combine aesthetics with enhanced mechanical durability, moisture resistance, and resistance to UV degradation. The design was engineered to withstand harsh climate conditions - heavy snow loads and strong winds - making it a versatile choice for installers looking for a solution that performs well on both sloped roofs and ground-mount farms. The HC 96 series stands out from the competition by combining high power density, mounting flexibility, and long-term reliability, translating into a lower levelized cost of energy (LCOE) and reduced demands on the rest of the balance of system (BoS). ## Notable figures - Efficiency of 22.8% matches the \*\*TOPCon 450-500W\*\* median - At 227.7 W/m² power density, roof space requirements are typical for \*\*TOPCon 450-500W\*\* panels - Temperature coefficient of -0.30%/°C matches the \*\*TOPCon 450-500W\*\* median - At 23.0 kg, weight matches the \*\*TOPCon 450-500W\*\* median - #3073 for efficiency, #6093 for temperature performance out of 14005 panels ## Questions ### How does TOPCon cell technology in the Solarever HC 96 panels differ from standard PERC cells? TOPCon cells used in the HC 96 series feature an additional passivation layer that reduces electron recombination, delivering higher efficiency than conventional PERC cells. In practice, this means more power from the same panel footprint, a smaller efficiency drop at high temperatures, and slower power degradation over time, resulting in a better lifetime energy yield for the installation. ### Are Solarever HC 96 panels suitable for mounting on a pitched residential roof? Yes, HC 96 modules with up to 470 Wp of power work well on both pitched roofs and ground-mounted systems. Half-cut technology reduces losses from partial shading caused by chimneys or dormers, and the sturdy full black frame provides mechanical stability under typical snow and wind loads found on residential roofs. ### What warranty comes with Solarever HC 96 panels and what does it cover? The manufacturer provides a 15-year product warranty covering material and workmanship defects, plus a 30-year power output warranty guaranteeing a defined production level throughout that period. This is standard for modern TOPCon panels and lets investors plan the return on their installation over the long term. ### Is it worth paying extra for the bifacial version of HC 96 panels instead of a standard monofacial module? The bifacial design of the HC 96 series lets the rear side of the module generate extra energy from light reflected off the roof, ground, or a bright surface. Actual gains depend on mounting height and ground albedo - on pitched roofs with limited clearance underneath the panel, the gain can be modest, while ground-mounted or tilted installations over reflective surfaces can see a few percent extra yield without increasing the installed area. ### Are dual glass Solarever HC 96 panels heavier and harder to install than standard modules? The dual glass version is somewhat heavier than modules with a rear polymer backsheet, but the difference does not complicate standard installation on typical roof or ground-mount structures. In exchange, the module gains higher resistance to moisture and UV degradation and longer mechanical lifespan, which matters especially for bifacial installations where both sides of the panel are exposed to weather. ### What is the maximum power rating of the Solarever HC 96 series, and how many panels are needed for a 10 kWp installation? The strongest variants in the HC 96 series reach up to 470 Wp. At that rating, a 10 kWp installation needs roughly 21-22 modules, though the exact number depends on the power variant chosen, available mounting area, and inverter configuration. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/SOLAREVER-450-470W-2bc14100d4cc.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [AIKO AIKO-A495-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a495-mce54mw) | 495 W | +40 W, cooler, +2.0 pp | | [Longi Solar LR7-54HJD-505M](https://comparepv.com/panel/longi-lr7-54hjd-505m) | 505 W | +50 W, cooler, +1.9 pp | | [AIKO AIKO-A490-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a490-mce54mw) | 490 W | +35 W, cooler, +1.7 pp | | [Longi Solar LR7-54HJD-500M](https://comparepv.com/panel/longi-lr7-54hjd-500m) | 500 W | +45 W, cooler, +1.7 pp | | [Talesun CIPRO-TN9C54M-500W](https://comparepv.com/panel/talesun-cipro-tn9c54m-500w) | 500 W | +45 W, cooler, +1.7 pp | | [Gokin GK-3-54HGb-500M](https://comparepv.com/panel/gokin-gk-3-54hgb-500m) | 500 W | +45 W, cooler, +1.7 pp | | [Solarever SE-182\*105-450M-96-BD](https://comparepv.com/panel/solarever-se-182-105-450m-96-bd) | 450 W | -0.2 pp | | [Solarever SE-182\*105-460M-96-BD](https://comparepv.com/panel/solarever-se-182-105-460m-96-bd) | 460 W | +0.2 pp | | [Solarever SE-182\*105-465M-96-BD](https://comparepv.com/panel/solarever-se-182-105-465m-96-bd) | 465 W | +10 W, +0.5 pp | | [Solarever SE-182\*105-470M-96-BD](https://comparepv.com/panel/solarever-se-182-105-470m-96-bd) | 470 W | +15 W, +0.8 pp | | [Longi Solar LR7-54HJD-510M](https://comparepv.com/panel/longi-lr7-54hjd-510m) | 510 W | +55 W, cooler, +2.2 pp | --- Source: https://comparepv.com/panel/solarever-se-182-105-455m-96-bd Not in this file, on the page: the I-V and temperature curves lifted from the manufacturer's datasheet, a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.