---
title: "Shinson Technology S455M72P2 Solar Panel: Specs & Datasheet | ComparePV"
description: "Shinson Technology S455M72P2 solar panel. Specs: 20.50% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient."
source: "https://comparepv.com/panel/shinson-technology-s455m72p2"
image: "https://comparepv.com/og/panel/shinson-technology-s455m72p2.png"
updated: 2026-09-11
---

# Shinson Technology S455M72P2

Middle of its segment, modest efficiency

452 panels in the segment PERC 450-500 W


## Identity

- **Manufacturer:** Shinson Technology
- **Model:** S455M72P2
- **Series:** S-Nano
- **Rated power:** 455 W
- **Cell technology:** PERC


## How it compares

Compared against segment PERC 450-500 W (452 panels).


| Measure | This panel | Segment median | Standing | Rank |
| --- | --- | --- | --- | --- |
| Power (Wp) | 455 W | 460 W | Typical |  |
| Module efficiency | 20.50% | 20.82% | Weak - bottom 20% | 11,389 |
| Power density | 209.3 | 208.5 | Typical | 10,045 |
| Temperature coefficient | -0.350 | -0.350 | Typical | 10,489 |
| Weight (kg) | 25.0 kg | 24.5 kg | Typical |  |
| Performance warranty | 25 yrs | 25 yrs | Typical | 9,912 |


### Full peer table


| Measure | This panel | Segment median | Standing | Rank |
| --- | --- | --- | --- | --- |
| Module efficiency | 20.50% | 20.82% | Weak - bottom 20% | 11,389 |
| Power density | 209.3 | 208.5 | Typical | 10,045 |
| Temperature coefficient | -0.350 | -0.350 | Typical | 10,489 |
| Weight per kWp | 54.9 | 53.1 | Typical | 9,410 |
| Performance warranty | 25 yrs | 25 yrs | Typical | 9,912 |


### Watch out for

- **20.50% module efficiency** - Bottom 20% of the PERC 450-500 W segment, against a median of 20.82%.

- **Best for:** Residential and commercial.
- **Not ideal for:** Tight roof space.


## Specification


### Electrical

- **Rated power (Pmax):** 455 W
- **Efficiency:** 20.50 %
- **Voltage at Pmax (Vmp):** 39.01 V
- **Current at Pmax (Imp):** 11.67 A
- **Open-circuit voltage (Voc):** 45.64 V
- **Short-circuit current (Isc):** 12.25 A
- **Max system voltage:** 1500 V


### Temperature

- **Temperature coefficient of Pmax:** -0.350 %/degC
- **Temperature coefficient of Voc:** -0.272 %/degC
- **Temperature coefficient of Isc:** 0.044 %/degC
- **NOCT:** 43 degC


### Cell and construction

- **Cell type:** Monocrystalline
- **Cell technology:** PERC
- **Cell count:** 132


### Physical

- **Length:** 2094 mm
- **Width:** 1038 mm
- **Thickness:** 35 mm
- **Weight:** 25.0 kg
- **Area:** 2.17 m2
- **Power density:** 209.3 Wp/m2


### Warranty and degradation

- **Product warranty:** 25 years
- **Performance warranty:** 25 years
- **Annual degradation:** 0.50 %
- **Output after 30 years:** 384 W


## Rank in the whole catalogue


| Measure | Position |
| --- | --- |
| Efficiency | 11389 of 14129 |
| Power density | 10045 of 14129 |
| Temperature coefficient | 10489 of 14129 |
| Weight | 9410 of 14129 |
| Warranty | 9912 of 14129 |


## About this series

The Shinson Technology S-Nano series is designed for maximum energy yield on a limited surface area - without compromising durability. In practice, it stands out due to the use of modern cell solutions, including **TOPCon type N** variants, which help maintain high operational efficiency over time and better cope with typical losses in rooftop installations. In selected configurations, a **bifacial design** is also available, allowing for the use of light reflected from the ground, which effectively supports energy production in locations where every additional kilowatt-hour counts.

S-Nano is a good choice for investors who expect predictable performance in various weather conditions and want to minimize the risk of performance degradation over time. The series is suitable for residential and commercial installations, especially on roofs with difficult exposure, and in locations where **stability of parameters** and **overall system profitability** are important, rather than just theoretical figures.


## Notable figures

- Efficiency of 20.5% matches the \*\*PERC 450-500W\*\* median
- Power density of 209.3 W/m² matches the \*\*PERC 450-500W\*\* median
- Temperature coefficient of -0.35%/°C matches the \*\*PERC 450-500W\*\* median
- Ranked #11389 out of 14129 panels for efficiency in the database


## Questions


### What is TOPCon technology in the Shinson Technology S-Nano panels, and is it worth the premium?

TOPCon (Tunnel Oxide Passivated Contact) is an N-type cell technology that delivers higher efficiency and lower degradation rates compared to older PERC cells. In the S-Nano series this translates to better performance at high temperatures and reduced power losses over the panel's lifetime. For the investor, it means more energy from the same roof area across decades of system operation.


### What warranty is included with the Shinson Technology S-Nano panels?

The S-Nano series comes with a 30-year product warranty covering material and manufacturing defects, plus a 30-year linear power output warranty. Both terms align with premium market standards. To keep the warranty valid, retain your purchase documents and ensure the installation meets the manufacturer's mounting and operating requirements.


### Are Shinson Technology S-Nano panels a good fit for a small roof with limited space?

Yes, the S-Nano series was designed specifically for space-constrained installations. TOPCon cell technology delivers higher efficiency per square meter than PERC cells, allowing greater power output from fewer modules. With a maximum power rating of 460 Wp, this series maximizes energy yield even on roofs with a challenging or restricted exposure.


### Is the Shinson Technology S-Nano 460 Wp panel bifacial?

No, this variant of the S-Nano series is a monofacial module that generates power from the front side only. It is worth noting that the S-Nano lineup also includes bifacial configurations that capture light reflected from the ground surface. If bifacial technology is a priority for your project, ask your distributor for the appropriate model.


### How do Shinson Technology S-Nano panels perform on hot days and in overcast conditions?

The N-type TOPCon cells used in the S-Nano series have a lower temperature coefficient than standard PERC cells, meaning less power loss when the module heats up during summer. N-type technology also performs comparatively well under diffuse light in overcast conditions. Actual energy yield remains strongly influenced by roof tilt angle and the absence of shading.


### Where are Shinson Technology S-Nano panels manufactured, and does the country of origin affect quality?

Shinson Technology is a China-based manufacturer with production capacity exceeding 10 GW. The panels carry standard quality certifications (IEC, CE) required for European markets. Chinese PV modules from established manufacturers are widely deployed in installations worldwide. Quality is best assessed through warranty conditions and certifications rather than country of origin alone.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/p2-450-455-460mono-facial-v3-1-0e734887da7d.pdf)


## Alternatives


| Panel | Power | How it differs |
| --- | --- | --- |
| [AIKO AIKO-A495-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a495-mce54mw) | 495 W | Cooler, +4.3 pp, +5 yr warranty |
| [Longi Solar LR7-54HJD-505M](https://comparepv.com/panel/longi-lr7-54hjd-505m) | 505 W | +50 W, cooler, +4.2 pp |
| [WINAICO WST-505BKX54-A2](https://comparepv.com/panel/winaico-wst-505bkx54-a2) | 505 W | +50 W, cooler, +4.2 pp |
| [AIKO AIKO-A490-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a490-mce54mw) | 490 W | Cooler, +4.0 pp, +5 yr warranty |
| [Longi Solar LR7-54HJD-500M](https://comparepv.com/panel/longi-lr7-54hjd-500m) | 500 W | Cooler, +4.0 pp, +5 yr warranty |
| [Talesun CIPRO-TN9C54M-500W](https://comparepv.com/panel/talesun-cipro-tn9c54m-500w) | 500 W | Cooler, +4.0 pp, +5 yr warranty |
| [Shinson Technology S450M72P2](https://comparepv.com/panel/shinson-technology-s450m72p2) | 450 W | Very close match |
| [Shinson Technology S460M72P2](https://comparepv.com/panel/shinson-technology-s460m72p2) | 460 W | Very close match |
| [Gamko New Energy GKA120N-PRO-590W](https://comparepv.com/panel/gamko-new-energy-gka120n-pro-590w) | 590 W | +135 W, +3.3 pp, +5 yr warranty |
| [Gamko New Energy GKA120N-PRO-585W](https://comparepv.com/panel/gamko-new-energy-gka120n-pro-585w) | 585 W | +130 W, +3.1 pp, +5 yr warranty |
| [Bisol BGO 580](https://comparepv.com/panel/bisol-bgo-580) | 580 W | +125 W, cooler, +3.0 pp |
| [Gamko New Energy GKA120N-PRO-580W](https://comparepv.com/panel/gamko-new-energy-gka120n-pro-580w) | 580 W | +125 W, +2.9 pp, +5 yr warranty |


---

Source: https://comparepv.com/panel/shinson-technology-s455m72p2

Not in this file, on the page: a thirty-year output simulator and alternatives filtered by how closely they match these dimensions.

