---
title: "Shinson Technology S415M44SBB Solar Panel: Specs & Datasheet | ComparePV"
description: "Shinson Technology S415M44SBB solar panel. Specs: 20.90% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient."
source: "https://comparepv.com/panel/shinson-technology-s415m44sbb"
image: "https://comparepv.com/og/panel/shinson-technology-s415m44sbb.png"
updated: 2026-09-11
---

# Shinson Technology S415M44SBB

Light for its output, no clear weak spot

954 panels in the segment PERC 400-450 W


## Identity

- **Manufacturer:** Shinson Technology
- **Model:** S415M44SBB
- **Series:** S-Nano
- **Rated power:** 415 W
- **Cell technology:** PERC


## How it compares

Compared against segment PERC 400-450 W (954 panels).


| Measure | This panel | Segment median | Standing | Rank |
| --- | --- | --- | --- | --- |
| Power (Wp) | 415 W | 410 W | Typical |  |
| Module efficiency | 20.90% | 20.60% | Typical | 10,148 |
| Power density | 209.0 | 206.2 | Typical | 10,271 |
| Temperature coefficient | -0.340 | -0.350 | Strong - top 24% | 8,846 |
| Weight (kg) | 20.8 kg | 22.0 kg | Strong - top 20% |  |
| Performance warranty | 25 yrs | 25 yrs | Typical | 9,912 |


### Full peer table


| Measure | This panel | Segment median | Standing | Rank |
| --- | --- | --- | --- | --- |
| Module efficiency | 20.90% | 20.60% | Typical | 10,148 |
| Power density | 209.0 | 206.2 | Typical | 10,271 |
| Temperature coefficient | -0.340 | -0.350 | Strong - top 24% | 8,846 |
| Weight per kWp | 50.1 | 53.0 | Strong - top 20% | 3,642 |
| Performance warranty | 25 yrs | 25 yrs | Typical | 9,912 |


### Strengths

- **50.1 kg per kWp** - Top 20% of the PERC 400-450 W segment, against a median of 53.0.
- **-0.340 %/°C temperature coefficient** - Top 24% of the PERC 400-450 W segment, against a median of -0.350.

- **Best for:** Residential and commercial.


## Specification


### Electrical

- **Rated power (Pmax):** 415 W
- **Efficiency:** 20.90 %
- **Voltage at Pmax (Vmp):** 34.40 V
- **Current at Pmax (Imp):** 12.08 A
- **Open-circuit voltage (Voc):** 41.50 V
- **Short-circuit current (Isc):** 12.80 A
- **Max system voltage:** 1500 V


### Temperature

- **Temperature coefficient of Pmax:** -0.340 %/degC
- **Temperature coefficient of Voc:** -0.270 %/degC
- **Temperature coefficient of Isc:** 0.040 %/degC
- **NOCT:** 42 degC


### Cell and construction

- **Cell type:** Monocrystalline
- **Cell technology:** PERC


### Physical

- **Length:** 1812 mm
- **Width:** 1096 mm
- **Thickness:** 30 mm
- **Weight:** 20.8 kg
- **Area:** 1.99 m2
- **Power density:** 209.0 Wp/m2


### Warranty and degradation

- **Product warranty:** 25 years
- **Performance warranty:** 25 years
- **Annual degradation:** 0.50 %
- **Output after 30 years:** 351 W


## Rank in the whole catalogue


| Measure | Position |
| --- | --- |
| Efficiency | 10148 of 14129 |
| Power density | 10271 of 14129 |
| Temperature coefficient | 8846 of 14129 |
| Weight | 3642 of 14129 |
| Warranty | 9912 of 14129 |


## About this series

The Shinson Technology S-Nano series is designed for maximum energy yield on a limited surface area - without compromising durability. In practice, it stands out due to the use of modern cell solutions, including **TOPCon type N** variants, which help maintain high operational efficiency over time and better cope with typical losses in rooftop installations. In selected configurations, a **bifacial design** is also available, allowing for the use of light reflected from the ground, which effectively supports energy production in locations where every additional kilowatt-hour counts.

S-Nano is a good choice for investors who expect predictable performance in various weather conditions and want to minimize the risk of performance degradation over time. The series is suitable for residential and commercial installations, especially on roofs with difficult exposure, and in locations where **stability of parameters** and **overall system profitability** are important, rather than just theoretical figures.


## Notable figures

- At 20.9% efficiency, this panel is on par with typical \*\*PERC 400-450W\*\* modules
- At 209.0 W/m² power density, roof space requirements are typical for \*\*PERC 400-450W\*\* panels
- Temperature coefficient of -0.34%/°C matches the \*\*PERC 400-450W\*\* median
- At 20.8 kg, this panel is 1.2 kg lighter than \*\*PERC 400-450W\*\* median (22.0 kg) - easier handling during installation
- In the top 72% for efficiency among all PERC panels


## Questions


### What is TOPCon technology in the Shinson Technology S-Nano panels, and is it worth the premium?

TOPCon (Tunnel Oxide Passivated Contact) is an N-type cell technology that delivers higher efficiency and lower degradation rates compared to older PERC cells. In the S-Nano series this translates to better performance at high temperatures and reduced power losses over the panel's lifetime. For the investor, it means more energy from the same roof area across decades of system operation.


### What warranty is included with the Shinson Technology S-Nano panels?

The S-Nano series comes with a 30-year product warranty covering material and manufacturing defects, plus a 30-year linear power output warranty. Both terms align with premium market standards. To keep the warranty valid, retain your purchase documents and ensure the installation meets the manufacturer's mounting and operating requirements.


### Are Shinson Technology S-Nano panels a good fit for a small roof with limited space?

Yes, the S-Nano series was designed specifically for space-constrained installations. TOPCon cell technology delivers higher efficiency per square meter than PERC cells, allowing greater power output from fewer modules. With a maximum power rating of 460 Wp, this series maximizes energy yield even on roofs with a challenging or restricted exposure.


### Is the Shinson Technology S-Nano 460 Wp panel bifacial?

No, this variant of the S-Nano series is a monofacial module that generates power from the front side only. It is worth noting that the S-Nano lineup also includes bifacial configurations that capture light reflected from the ground surface. If bifacial technology is a priority for your project, ask your distributor for the appropriate model.


### How do Shinson Technology S-Nano panels perform on hot days and in overcast conditions?

The N-type TOPCon cells used in the S-Nano series have a lower temperature coefficient than standard PERC cells, meaning less power loss when the module heats up during summer. N-type technology also performs comparatively well under diffuse light in overcast conditions. Actual energy yield remains strongly influenced by roof tilt angle and the absence of shading.


### Where are Shinson Technology S-Nano panels manufactured, and does the country of origin affect quality?

Shinson Technology is a China-based manufacturer with production capacity exceeding 10 GW. The panels carry standard quality certifications (IEC, CE) required for European markets. Chinese PV modules from established manufacturers are widely deployed in installations worldwide. Quality is best assessed through warranty conditions and certifications rather than country of origin alone.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/S-shingled-415-430W-Ultra-Black-092273524a3d.pdf)


## Alternatives


| Panel | Power | How it differs |
| --- | --- | --- |
| [Just Solar JST-EDMH-(445-465)W-TD (465W class)](https://comparepv.com/panel/just-solar-jst-edmh-445-465-w-td-465w-class) | 465 W | +50 W, +2.9 pp, +5 yr warranty |
| [Luxor Solar LX-465M/182R-96+ GG](https://comparepv.com/panel/luxor-lx-465m-182r-96-gg) | 465 W | +50 W, cooler, +2.9 pp |
| [AIKO AIKO-A460-MAH54Mb](https://comparepv.com/panel/aiko-shenzhen-aiko-digital-energy-technology-co-ltd-aiko-a460-mah54mb-1) | 460 W | Cooler, +2.7 pp, +5 yr warranty |
| [Luxor Solar LX-465M/182R188-108+ GG](https://comparepv.com/panel/luxor-solar-lx-465m-182r188-108-gg) | 465 W | +50 W, cooler, +2.7 pp |
| [Just Solar JST-EDMH-(445-465)W-TD (460W class)](https://comparepv.com/panel/just-solar-jst-edmh-445-465-w-td-460w-class) | 460 W | +45 W, +2.7 pp, +5 yr warranty |
| [Luxor Solar LX-460M/182R-96+ GG](https://comparepv.com/panel/luxor-lx-460m-182r-96-gg) | 460 W | Cooler, +2.7 pp, +5 yr warranty |
| [Philadelphia Solar PS-MNB108(HCBF)-460W](https://comparepv.com/panel/philadelphia-solar-ps-mnb108-hcbf-460w) | 460 W | Cooler, +2.6 pp, +5 yr warranty |
| [JA Solar JAT54S40-460/LR](https://comparepv.com/panel/ja-solar-jat54s40-460-lr) | 460 W | Cooler, +2.6 pp, +5 yr warranty |
| [Shinson Technology S420M44SBB](https://comparepv.com/panel/shinson-technology-s420m44sbb) | 420 W | +0.2 pp |
| [Shinson Technology S425M44SBB](https://comparepv.com/panel/shinson-technology-s425m44sbb) | 425 W | +10 W, +0.5 pp |
| [Shinson Technology S430M44SBB](https://comparepv.com/panel/shinson-technology-s430m44sbb) | 430 W | +15 W, +0.8 pp |
| [Longi Solar LR7-54HJD-510M](https://comparepv.com/panel/longi-lr7-54hjd-510m) | 510 W | +95 W, cooler, +4.1 pp |
| [AIKO AIKO-A495-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a495-mce54mw) | 495 W | +80 W, cooler, +3.9 pp |
| [Longi Solar LR7-54HJD-505M](https://comparepv.com/panel/longi-lr7-54hjd-505m) | 505 W | +90 W, cooler, +3.8 pp |
| [WINAICO WST-505BKX54-A2](https://comparepv.com/panel/winaico-wst-505bkx54-a2) | 505 W | +90 W, cooler, +3.8 pp |
| [AIKO AIKO-A490-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a490-mce54mw) | 490 W | +75 W, cooler, +3.6 pp |


---

Source: https://comparepv.com/panel/shinson-technology-s415m44sbb

Not in this file, on the page: a thirty-year output simulator and alternatives filtered by how closely they match these dimensions.

