--- title: "Seraphim SRP-630-BTZ-BG 630W Solar Panel - Specs & Review | ComparePV" description: "Seraphim SRP-630-BTZ-BG 630W solar panel. Specs: 22.54% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/seraphim-srp-630-btz-bg" updated: 2026-09-11 --- # Seraphim SRP-630-BTZ-BG Middle of its segment, heavy for its output 1,086 panels in the segment TOPCon 600-650 W ## Identity - **Manufacturer:** Seraphim - **Model:** SRP-630-BTZ-BG - **Series:** Sable - **Rated power:** 630 W - **Cell technology:** TOPCon - **Bifacial:** yes ## How it compares Compared against segment TOPCon 600-650 W (1086 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 630 W | 620 W | Typical | | | Module efficiency | 22.54% | 22.80% | Typical | 3,920 | | Power density | 225.4 | 227.7 | Typical | 3,907 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,165 | | Weight (kg) | 34.6 kg | 32.7 kg | Weak - bottom 17% | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 22.54% | 22.80% | Typical | 3,920 | | Power density | 225.4 | 227.7 | Typical | 3,907 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,165 | | Weight per kWp | 54.9 | 53.1 | Weak - bottom 17% | 9,305 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Watch out for - **54.9 kg per kWp** - Bottom 17% of the TOPCon 600-650 W segment, against a median of 53.1. - **Best for:** Commercial, utility-scale and shaded-installations. - **Not ideal for:** Weight-limited structures. ## Specification ### Electrical - **Rated power (Pmax):** 630 W - **Efficiency:** 22.54 % - **Voltage at Pmax (Vmp):** 47.13 V - **Current at Pmax (Imp):** 13.37 A - **Open-circuit voltage (Voc):** 56.44 V - **Short-circuit current (Isc):** 14.07 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.290 %/degC - **Temperature coefficient of Voc:** -0.250 %/degC - **Temperature coefficient of Isc:** 0.046 %/degC - **NOCT:** 45 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** TOPCon - **Cell count:** 156 - **Bifacial:** yes - **Bifacial gain:** 30.00 ### Physical - **Length:** 2465 mm - **Width:** 1134 mm - **Thickness:** 30 mm - **Weight:** 34.6 kg - **Area:** 2.80 m2 - **Power density:** 225.4 Wp/m2 ### Warranty and degradation - **Product warranty:** 15 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 87.4 % - **First-year degradation:** 1.00 % - **Annual degradation:** 0.40 % - **Output after 30 years:** 551 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 3920 of 14005 | | Power density | 3907 of 14005 | | Temperature coefficient | 2165 of 14005 | | Weight | 9305 of 14005 | | Warranty | 21 of 14005 | ## About this series Seraphim Sable is a series of modules based on **N-type TOPCon cells**, designed to achieve high energy yields even under less-than-ideal conditions. Thanks to passivated contacts and a **multi-busbar architecture**, the panels efficiently "collect" current from the cells and perform better in shaded or low-light conditions - which is a significant advantage in the Polish climate, leading to more stable daily energy production. In practice, Sable solves a common problem for investors: how to increase yield without adding more modules. This is facilitated by the **glass-to-glass bifacial design**, which can also utilize reflected light from the ground, while also improving resistance to environmental factors. Another key feature is the focus on **low power degradation over time**, which makes it easier to plan the long-term profitability of the installation. It is a good choice for residential and commercial installations, as well as ground-mounted projects - anywhere where high production, durability, and predictability are important. ## Notable figures - At 22.5% efficiency, this panel is on par with typical \*\*TOPCon 600-650W\*\* modules - At 225.4 W/m² power density, roof space requirements are typical for \*\*TOPCon 600-650W\*\* panels - At -0.29%/°C, hot weather performance is typical for \*\*TOPCon 600-650W\*\* panels - Weight of 34.6 kg is 1.9 kg above \*\*TOPCon 600-650W\*\* median (32.7 kg) - verify structural support - Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof ## Questions ### What warranty does the Seraphim Sable series come with? The Sable series includes a 15-year product warranty covering defects in materials and workmanship, plus a 30-year power output warranty. After 30 years, Seraphim guarantees at least 84.95% of the rated power. Thanks to TOPCon technology, annual degradation sits at approximately 0.4%, making long-term yield forecasting straightforward for system owners and investors. ### What is TOPCon technology and why choose Seraphim Sable over older PERC panels? TOPCon (Tunnel Oxide Passivated Contact) is an N-type cell design where a thin silicon oxide layer reduces carrier recombination losses. Sable panels deliver higher conversion efficiency than standard PERC cells and a lower temperature coefficient of around -0.29%/°C, meaning smaller power losses on hot days. LID-related initial degradation is below 1%, stabilizing at roughly 0.4% per year thereafter. ### Do Seraphim Sable panels perform well in overcast conditions and low irradiance, typical of Northern European climates? Yes. The multi-busbar architecture shortens current-flow paths between cells and reduces resistive losses at low irradiance. N-type TOPCon cells also show high sensitivity to diffuse light. This translates into measurably better energy yield during cloudy mornings and afternoons, which account for a significant share of production hours in Central and Northern Europe. ### What is the maximum power output of the Seraphim Sable module, and will a 720 Wp panel fit on a typical residential roof? The top variant of the Sable series reaches 720 Wp using 210 mm cells with module efficiency exceeding 23%. This is a large-format panel primarily suited for ground-mount and commercial rooftop installations. For residential projects, Seraphim offers smaller variants within the same Sable series compatible with standard racking systems — confirm the available model with your installer. ### Is Seraphim a reliable manufacturer? Where are they based and are they Tier 1? Seraphim Solar is a Chinese PV manufacturer headquartered in Nantong, operating since 2011 and holding Tier 1 status as recognized by independent rating agencies including BNEF. Tier 1 classification indicates bank-financeable track record and consistent manufacturing capacity, which significantly lowers long-term warranty risk for the system owner. ### What temperature range can Seraphim Sable panels handle, and do they work well in winter? Sable panels are certified for an operating temperature range of -40°C to +85°C, so cold winters pose no risk whatsoever. In fact, N-type TOPCon cells have a lower temperature coefficient than PERC technology, meaning cold but sunny winter days can be especially productive — low ambient temperature reduces thermal losses and boosts output relative to rated STC conditions. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/eca85dd8838852bda40dc0c55ba6f662-87ac95d59e2e.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [AIKO AIKO-A650-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a650-mae72mw) | 650 W | Cooler, lighter, +2.7 pp | | [AIKO AIKO-A680-MDE72Mw](https://comparepv.com/panel/aiko-aiko-a680-mde72mw) | 680 W | +50 W, lighter, +2.7 pp | | [AIKO AIKO-A675-MDE72Mw](https://comparepv.com/panel/aiko-aiko-a675-mde72mw) | 675 W | +45 W, lighter, +2.5 pp | | [AIKO AIKO-A645-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a645-mae72mw) | 645 W | Cooler, lighter, +2.5 pp | | [AIKO AIKO-G670-MCH72Mw](https://comparepv.com/panel/aiko-aiko-g670-mch72mw) | 670 W | +40 W, lighter, +2.3 pp | | [Longi Solar LR7-72HVHF-670M](https://comparepv.com/panel/longi-lr7-72hvhf-670m) | 670 W | +40 W, lighter, +2.3 pp | | [AIKO AIKO-A640-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a640-mae72mw) | 640 W | Cooler, lighter, +2.3 pp | | [Seraphim SRP-580-BMZ-HV](https://comparepv.com/panel/seraphim-srp-580-bmz-hv) | 580 W | Hotter, lighter, -1.8 pp | | [Seraphim SRP-585-BMZ-BG](https://comparepv.com/panel/seraphim-srp-585-bmz-bg) | 585 W | -45 W, hotter, -1.6 pp | | [Seraphim SRP-590-BMZ-BG](https://comparepv.com/panel/seraphim-srp-590-bmz-bg) | 590 W | -40 W, hotter, -1.4 pp | | [Seraphim SRP-595-BMZ-HV](https://comparepv.com/panel/seraphim-srp-595-bmz-hv) | 595 W | Hotter, lighter, -1.2 pp | | [Seraphim SRP-600-BMZ-HV](https://comparepv.com/panel/seraphim-srp-600-bmz-hv) | 600 W | Hotter, lighter, -1.1 pp | | [AIKO AIKO-A700-MAE78Dw](https://comparepv.com/panel/aiko-aiko-a700-mae78dw) | 700 W | +70 W, cooler, +2.5 pp | | [AIKO AIKO-A695-MAE78Dw](https://comparepv.com/panel/aiko-aiko-a695-mae78dw) | 695 W | +65 W, cooler, +2.4 pp | | [Jinko Solar JKM650-670N-66QL6-BDV (670W class)](https://comparepv.com/panel/jinko-solar-jkm650-670n-66ql6-bdv-670w-class) | 670 W | +40 W, cooler, +2.3 pp | --- Source: https://comparepv.com/panel/seraphim-srp-630-btz-bg Not in this file, on the page: the I-V and temperature curves lifted from the manufacturer's datasheet, a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.