--- title: "Seraphim SRP-550-BTB-BG Solar Panel: Specs & Datasheet | ComparePV" description: "Seraphim SRP-550-BTB-BG solar panel. Specs: 22.33% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/seraphim-srp-550-btb-bg" image: "https://comparepv.com/og/panel/seraphim-srp-550-btb-bg.png" updated: 2026-09-11 --- # Seraphim SRP-550-BTB-BG Middle of its segment, heavy for its output 1,022 panels in the segment TOPCon 550-600 W ## Identity - **Manufacturer:** Seraphim - **Model:** SRP-550-BTB-BG - **Series:** Sable - **Rated power:** 550 W - **Cell technology:** TOPCon - **Bifacial:** yes ## How it compares Compared against segment TOPCon 550-600 W (1022 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 550 W | 580 W | Weak - bottom 2% | | | Module efficiency | 22.33% | 22.44% | Typical | 5,116 | | Power density | 223.3 | 224.4 | Typical | 5,104 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,220 | | Weight (kg) | 33.8 kg | 31.2 kg | Weak - bottom 2% | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 22.33% | 22.44% | Typical | 5,116 | | Power density | 223.3 | 224.4 | Typical | 5,104 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,220 | | Weight per kWp | 61.5 | 53.8 | Weak - bottom 2% | 12,744 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Watch out for - **61.5 kg per kWp** - Bottom 2% of the TOPCon 550-600 W segment, against a median of 53.8. Ranked 12,744th in the whole database. - **Best for:** Commercial, utility-scale and shaded-installations. - **Not ideal for:** Weight-limited structures. ## Specification ### Electrical - **Rated power (Pmax):** 550 W - **Efficiency:** 22.33 % - **Voltage at Pmax (Vmp):** 36.81 V - **Current at Pmax (Imp):** 14.95 A - **Open-circuit voltage (Voc):** 44.27 V - **Short-circuit current (Isc):** 15.83 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.290 %/degC - **Temperature coefficient of Voc:** -0.250 %/degC - **Temperature coefficient of Isc:** 0.046 %/degC - **NOCT:** 45 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** TOPCon - **Cell count:** 120 - **Bifacial:** yes - **Bifacial gain:** 30.00 ### Physical - **Length:** 2172 mm - **Width:** 1134 mm - **Thickness:** 30 mm - **Weight:** 33.8 kg - **Area:** 2.46 m2 - **Power density:** 223.3 Wp/m2 ### Warranty and degradation - **Product warranty:** 15 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 87.4 % - **First-year degradation:** 1.00 % - **Annual degradation:** 0.40 % - **Output after 30 years:** 481 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 5116 of 14129 | | Power density | 5104 of 14129 | | Temperature coefficient | 2220 of 14129 | | Weight | 12744 of 14129 | | Warranty | 21 of 14129 | ## About this series Seraphim Sable is a series of modules based on **N-type TOPCon cells**, designed to achieve high energy yields even under less-than-ideal conditions. Thanks to passivated contacts and a **multi-busbar architecture**, the panels efficiently "collect" current from the cells and perform better in shaded or low-light conditions - which is a significant advantage in the Polish climate, leading to more stable daily energy production. In practice, Sable solves a common problem for investors: how to increase yield without adding more modules. This is facilitated by the **glass-to-glass bifacial design**, which can also utilize reflected light from the ground, while also improving resistance to environmental factors. Another key feature is the focus on **low power degradation over time**, which makes it easier to plan the long-term profitability of the installation. It is a good choice for residential and commercial installations, as well as ground-mounted projects - anywhere where high production, durability, and predictability are important. ## Notable figures - At 22.3% efficiency, this panel is on par with typical \*\*TOPCon 550-600W\*\* modules - At 223.3 W/m² power density, roof space requirements are typical for \*\*TOPCon 550-600W\*\* panels - Temperature coefficient of -0.29%/°C matches the \*\*TOPCon 550-600W\*\* median - At 33.8 kg (2.6 kg above \*\*TOPCon 550-600W\*\* median of 31.2 kg), requires checking roof load capacity - 80% bifaciality enables rear-side power generation, boosting yield by 4-12% on reflective surfaces ## Questions ### What warranty does the Seraphim Sable series come with? The Sable series includes a 15-year product warranty covering defects in materials and workmanship, plus a 30-year power output warranty. After 30 years, Seraphim guarantees at least 84.95% of the rated power. Thanks to TOPCon technology, annual degradation sits at approximately 0.4%, making long-term yield forecasting straightforward for system owners and investors. ### What is TOPCon technology and why choose Seraphim Sable over older PERC panels? TOPCon (Tunnel Oxide Passivated Contact) is an N-type cell design where a thin silicon oxide layer reduces carrier recombination losses. Sable panels deliver higher conversion efficiency than standard PERC cells and a lower temperature coefficient of around -0.29%/°C, meaning smaller power losses on hot days. LID-related initial degradation is below 1%, stabilizing at roughly 0.4% per year thereafter. ### Do Seraphim Sable panels perform well in overcast conditions and low irradiance, typical of Northern European climates? Yes. The multi-busbar architecture shortens current-flow paths between cells and reduces resistive losses at low irradiance. N-type TOPCon cells also show high sensitivity to diffuse light. This translates into measurably better energy yield during cloudy mornings and afternoons, which account for a significant share of production hours in Central and Northern Europe. ### What is the maximum power output of the Seraphim Sable module, and will a 720 Wp panel fit on a typical residential roof? The top variant of the Sable series reaches 720 Wp using 210 mm cells with module efficiency exceeding 23%. This is a large-format panel primarily suited for ground-mount and commercial rooftop installations. For residential projects, Seraphim offers smaller variants within the same Sable series compatible with standard racking systems - confirm the available model with your installer. ### Is Seraphim a reliable manufacturer? Where are they based and are they Tier 1? Seraphim Solar is a Chinese PV manufacturer headquartered in Nantong, operating since 2011 and holding Tier 1 status as recognized by independent rating agencies including BNEF. Tier 1 classification indicates bank-financeable track record and consistent manufacturing capacity, which significantly lowers long-term warranty risk for the system owner. ### What temperature range can Seraphim Sable panels handle, and do they work well in winter? Sable panels are certified for an operating temperature range of -40°C to +85°C, so cold winters pose no risk whatsoever. In fact, N-type TOPCon cells have a lower temperature coefficient than PERC technology, meaning cold but sunny winter days can be especially productive - low ambient temperature reduces thermal losses and boosts output relative to rated STC conditions. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/5ee279029e6464a21519600fb8625229-666b60c9d66b.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [Longi Solar LR7-54HJD-510M](https://comparepv.com/panel/longi-lr7-54hjd-510m) | 510 W | Cooler, lighter, +2.7 pp | | [Longi Solar LR7-60HVH-560M](https://comparepv.com/panel/longi-lr7-60hvh-560m) | 560 W | Cooler, lighter, +2.5 pp | | [Longi Solar LR7-54HJD-505M](https://comparepv.com/panel/longi-lr7-54hjd-505m) | 505 W | Cooler, lighter, +2.4 pp | | [WINAICO WST-505BKX54-A2](https://comparepv.com/panel/winaico-wst-505bkx54-a2) | 505 W | -45 W, lighter, +2.4 pp | | [Longi Solar LR7-60HVH-555M](https://comparepv.com/panel/longi-lr7-60hvh-555m) | 555 W | Cooler, lighter, +2.3 pp | | [Longi Solar LR7-54HJD-500M](https://comparepv.com/panel/longi-lr7-54hjd-500m) | 500 W | -50 W, lighter, +2.2 pp | | [Seraphim SRP-555-BTB-BG](https://comparepv.com/panel/seraphim-srp-555-btb-bg) | 555 W | +0.2 pp | | [Seraphim SRP-560-BTB-BG](https://comparepv.com/panel/seraphim-srp-560-btb-bg) | 560 W | +10 W, +0.4 pp | | [Seraphim SRP-565-BTB-BG](https://comparepv.com/panel/seraphim-srp-565-btb-bg) | 565 W | +15 W, +0.6 pp | | [Seraphim SRP-570-BTB-BG](https://comparepv.com/panel/seraphim-srp-570-btb-bg) | 570 W | +20 W, +0.8 pp | | [Seraphim SRP-575-BTB-BG](https://comparepv.com/panel/seraphim-srp-575-btb-bg) | 575 W | +25 W, +1.0 pp | | [Gamko New Energy GKA120N-PRO-590W](https://comparepv.com/panel/gamko-new-energy-gka120n-pro-590w) | 590 W | +40 W, lighter, +1.5 pp | | [Gamko New Energy GKA120N-PRO-585W](https://comparepv.com/panel/gamko-new-energy-gka120n-pro-585w) | 585 W | +35 W, lighter, +1.3 pp | | [Bisol BGO 580](https://comparepv.com/panel/bisol-bgo-580) | 580 W | +30 W, lighter, +1.2 pp | | [Gamko New Energy GKA120N-PRO-580W](https://comparepv.com/panel/gamko-new-energy-gka120n-pro-580w) | 580 W | +30 W, lighter, +1.1 pp | --- Source: https://comparepv.com/panel/seraphim-srp-550-btb-bg Not in this file, on the page: the I-V and temperature curves lifted from the manufacturer's datasheet, a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.