--- title: "Runergy HY-DH96N11B-440 440W Solar Panel - Specs & Review | ComparePV" description: "Runergy HY-DH96N11B-440 440W solar panel. Specs: 22.00% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/runergy-hy-dh96n11b-440" updated: 2026-09-13 --- # Runergy HY-DH96N11B-440 Middle of its segment, heavy for its output 321 panels in the segment N-type 400-450 W ## Identity - **Manufacturer:** Runergy - **Model:** HY-DH96N11B-440 - **Series:** HY-DH96N11B - **Rated power:** 440 W - **Cell technology:** N-type - **Bifacial:** yes ## How it compares Compared against segment N-type 400-450 W (321 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 440 W | 430 W | Strong - top 23% | | | Module efficiency | 22.00% | 21.91% | Typical | 6,517 | | Power density | 220.2 | 218.3 | Typical | 6,328 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,165 | | Weight (kg) | 25.0 kg | 22.0 kg | Weak - bottom 13% | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 22.00% | 21.91% | Typical | 6,517 | | Power density | 220.2 | 218.3 | Typical | 6,328 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,165 | | Weight per kWp | 56.8 | 51.2 | Weak - bottom 13% | 10,878 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Watch out for - **56.8 kg per kWp** - Bottom 13% of the N-type 400-450 W segment, against a median of 51.2. - **Best for:** Commercial, utility-scale and shaded-installations. - **Not ideal for:** Weight-limited structures. ## Specification ### Electrical - **Rated power (Pmax):** 440 W - **Efficiency:** 22.00 % - **Voltage at Pmax (Vmp):** 29.16 V - **Current at Pmax (Imp):** 15.09 A - **Open-circuit voltage (Voc):** 34.98 V - **Short-circuit current (Isc):** 15.91 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.290 %/degC - **Temperature coefficient of Voc:** -0.250 %/degC - **Temperature coefficient of Isc:** 0.045 %/degC - **NOCT:** 45 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** N-type - **Cell count:** 96 - **Bifacial:** yes - **Bifacial gain:** 25.00 ### Physical - **Length:** 1762 mm - **Width:** 1134 mm - **Thickness:** 30 mm - **Weight:** 25.0 kg - **Area:** 2.00 m2 - **Power density:** 220.2 Wp/m2 ### Warranty and degradation - **Product warranty:** 12 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 87.4 % - **First-year degradation:** 1.00 % - **Annual degradation:** 0.40 % - **Output after 30 years:** 385 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 6517 of 14005 | | Power density | 6328 of 14005 | | Temperature coefficient | 2165 of 14005 | | Weight | 10878 of 14005 | | Warranty | 21 of 14005 | ## About this series The HY-DH96N11B series consists of dual-sided photovoltaic modules built on **N-Type TOPCon 210R cells** in a **half-cut** configuration, engineered for installations that need to squeeze the most energy out of every square meter of roof or ground space. Thanks to **bifacial technology**, the panels capture light reflected off the surrounding surface, meaningfully boosting energy yield without expanding the footprint of the installation - a solution particularly appealing for solar farms and commercial projects where every extra kilowatt-hour matters. The **dual-glass** construction, with tempered glass on both sides of the cells, improves mechanical durability and extends module lifespan while reducing PID degradation and improving performance in low-light conditions. A low temperature coefficient keeps the series performing steadily even on hot days, translating into a lower LCOE over the system's full lifecycle. HY-DH96N11B works equally well in commercial-scale projects and larger prosumer installations, where investors expect reliability, predictable return on investment, and reduced power losses across the BoS. It's the choice for installers who want to offer clients a modern, proven N-Type technology instead of aging PERC solutions. ## Notable figures - At 22.0% efficiency, this panel is on par with typical \*\*N-type 400-450W\*\* modules - Power density of 220.2 W/m² matches the \*\*N-type 400-450W\*\* median - At -0.29%/°C, hot weather performance is typical for \*\*N-type 400-450W\*\* panels - At 25.0 kg, this panel is 3.0 kg heavier than the \*\*N-type 400-450W\*\* median (22.0 kg) - more demanding for installation crews - 80% bifaciality enables rear-side power generation, boosting yield by 4-12% on reflective surfaces ## Questions ### What is the maximum power output of the Runergy HY-DH96N11B panel? The HY-DH96N11B series reaches a maximum power output of up to 440 Wp. This is achieved thanks to N-Type TOPCon 210R half-cut cells, which reduce current losses and improve conversion efficiency compared to older PERC technology. Higher module wattage means fewer panels are needed for a given system size, lowering mounting structure and labor costs. ### How does N-Type TOPCon technology in the HY-DH96N11B differ from PERC panels? N-Type TOPCon cells have a lower annual degradation rate and are less susceptible to LID and LeTID compared to P-type PERC cells. As a result, HY-DH96N11B panels maintain higher efficiency over time, perform better under low irradiance, and have a lower temperature coefficient, translating into more stable energy yield on hot days. ### What is the warranty on Runergy HY-DH96N11B panels? The HY-DH96N11B series comes with a 12-year product warranty covering material and workmanship defects, along with a 30-year linear power warranty guaranteeing a defined performance level over the module's lifespan. This is standard for modern N-Type modules and significantly longer than typical PERC panels, contributing to a lower LCOE for the installation. ### Is Runergy a tier 1 manufacturer, and can it be trusted for large commercial installations? Yes, Runergy is classified as a tier 1 manufacturer, meaning stable financial standing, in-house production lines, and inclusion in Bloomberg NEF's rankings of bankable PV module suppliers. The company is headquartered in China and exports to commercial markets and solar farms, where supply reliability and long-term warranty support matter most. ### Are HY-DH96N11B panels suitable for large ground-mount and commercial installations? Yes, the dual-glass construction with tempered glass on both sides of the cells increases mechanical strength and reduces PID degradation, which matters for large solar farms exposed to variable weather conditions. High single-module power output (up to 440 Wp) combined with a low temperature coefficient makes this series suitable for both commercial projects and larger residential/prosumer installations. ### Do HY-DH96N11B panels perform well in hot summer conditions? Yes, thanks to the low temperature coefficient of N-Type TOPCon cells, HY-DH96N11B modules lose less power as operating temperature rises compared to PERC-based designs. This means more stable energy yield on hot, sunny days when panel temperature can exceed 60°C, resulting in a better real-world return on investment in warmer climates. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/HY-DH96N11B-Global-Ver25Q4Bifacial_435-455W-038725ab74b8.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [AIKO AIKO-A490-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a490-mce54mw) | 490 W | +50 W, lighter, +2.5 pp | | [Suntech STP-NT11/48QGSF-490](https://comparepv.com/panel/suntech-stp-nt11-48qgsf-490) | 490 W | +50 W, lighter, +2.5 pp | | [JA Solar JAT54S40-485/LR](https://comparepv.com/panel/ja-solar-jat54s40-485-lr) | 485 W | +45 W, lighter, +2.3 pp | | [AIKO AIKO-A485-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a485-mce54mw) | 485 W | +45 W, lighter, +2.3 pp | | [AIKO AIKO-A485-MAH54Mw](https://comparepv.com/panel/aiko-aiko-a485-mah54mw) | 485 W | +45 W, lighter, +2.3 pp | | [Gokin GK-5-54HG-485M](https://comparepv.com/panel/gokin-gk-5-54hg-485m) | 485 W | +45 W, lighter, +2.3 pp | | [Heckert Solar ZEUS 3.0+ 108 485WP](https://comparepv.com/panel/heckert-solar-zeus-3-0-108-485wp) | 485 W | +45 W, cooler, +2.3 pp | | [Runergy HY-DH96N11B-435](https://comparepv.com/panel/runergy-hy-dh96n11b-435) | 435 W | Very close match | | [Runergy HY-DH96N11-445](https://comparepv.com/panel/runergy-hy-dh96n11-445) | 445 W | +0.3 pp | | [Runergy HY-DH96N11B-450](https://comparepv.com/panel/runergy-hy-dh96n11b-450) | 450 W | +10 W, +0.5 pp | | [Longi Solar LR7-54HJD-510M](https://comparepv.com/panel/longi-lr7-54hjd-510m) | 510 W | +70 W, cooler, +3.0 pp | | [AIKO AIKO-A495-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a495-mce54mw) | 495 W | +55 W, lighter, +2.8 pp | | [Longi Solar LR7-54HJD-505M](https://comparepv.com/panel/longi-lr7-54hjd-505m) | 505 W | +65 W, cooler, +2.7 pp | | [Longi Solar LR7-54HJD-500M](https://comparepv.com/panel/longi-lr7-54hjd-500m) | 500 W | +60 W, cooler, +2.5 pp | | [Talesun CIPRO-TN9C54M-500W](https://comparepv.com/panel/talesun-cipro-tn9c54m-500w) | 500 W | +60 W, lighter, +2.5 pp | --- Source: https://comparepv.com/panel/runergy-hy-dh96n11b-440 Not in this file, on the page: the I-V and temperature curves lifted from the manufacturer's datasheet, a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.