--- title: "Runergy HY-DH96N11-460 460W Solar Panel - Specs & Review | ComparePV" description: "Runergy HY-DH96N11-460 460W solar panel. Specs: 23.00% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/runergy-hy-dh96n11-460" updated: 2026-09-11 --- # Runergy HY-DH96N11-460 Middle of its segment, heavy for its output 301 panels in the segment N-type 450-500 W ## Identity - **Manufacturer:** Runergy - **Model:** HY-DH96N11-460 - **Series:** HY-DH96N11 - **Rated power:** 460 W - **Cell technology:** N-type - **Bifacial:** yes ## How it compares Compared against segment N-type 450-500 W (301 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 460 W | 470 W | Typical | | | Module efficiency | 23.00% | 22.52% | Typical | 1,919 | | Power density | 230.2 | 225.2 | Typical | 1,876 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,165 | | Weight (kg) | 25.0 kg | 23.7 kg | Weak - bottom 22% | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 23.00% | 22.52% | Typical | 1,919 | | Power density | 230.2 | 225.2 | Typical | 1,876 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,165 | | Weight per kWp | 54.3 | 49.5 | Weak - bottom 22% | 8,637 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Watch out for - **54.3 kg per kWp** - Bottom 22% of the N-type 450-500 W segment, against a median of 49.5. - **Best for:** Commercial, utility-scale and shaded-installations. - **Not ideal for:** Weight-limited structures. ## Specification ### Electrical - **Rated power (Pmax):** 460 W - **Efficiency:** 23.00 % - **Voltage at Pmax (Vmp):** 29.70 V - **Current at Pmax (Imp):** 15.49 A - **Open-circuit voltage (Voc):** 35.52 V - **Short-circuit current (Isc):** 16.23 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.290 %/degC - **Temperature coefficient of Voc:** -0.250 %/degC - **Temperature coefficient of Isc:** 0.045 %/degC - **NOCT:** 45 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** N-type - **Cell count:** 96 - **Bifacial:** yes - **Bifacial gain:** 25.00 ### Physical - **Length:** 1762 mm - **Width:** 1134 mm - **Thickness:** 30 mm - **Weight:** 25.0 kg - **Area:** 2.00 m2 - **Power density:** 230.2 Wp/m2 ### Warranty and degradation - **Product warranty:** 12 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 87.4 % - **First-year degradation:** 1.00 % - **Annual degradation:** 0.40 % - **Output after 30 years:** 402 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 1919 of 14005 | | Power density | 1876 of 14005 | | Temperature coefficient | 2165 of 14005 | | Weight | 8637 of 14005 | | Warranty | 21 of 14005 | ## About this series The HY-DH96N11 series is a dual-sided photovoltaic module built on **N-Type cells** and the 210R platform, combining **half-cut** cell technology with a **bifacial, dual glass** design. This construction captures light reflected off the ground surface to meaningfully boost energy yield without increasing installation footprint, helping to lower the cost of energy per kWp (LCOE). The panel stands out for its **low susceptibility to LID, LeTID and PID degradation**, keeping output stable throughout its service life, while a low power temperature coefficient means it performs better on hot days and under low-light conditions than conventional P-Type modules. A reinforced frame and tempered glass provide resistance to heavy snow, wind and hail loads, making the series a strong fit for both rooftop installations and ground-mounted solar farms exposed to demanding weather. Backed by a **long-term linear power warranty** and strict manufacturing quality control, the HY-DH96N11 is built for investors and installers seeking high reliability and predictable returns on commercial and industrial projects. ## Notable figures - At 23.0% efficiency, this panel is on par with typical \*\*N-type 450-500W\*\* modules - At 230.2 W/m² power density, this panel generates 5.0 W/m² more per unit area than \*\*N-type 450-500W\*\* median (225.2 W/m²) - At -0.29%/°C, hot weather performance is typical for \*\*N-type 450-500W\*\* panels - Weight of 25.0 kg is 1.3 kg above \*\*N-type 450-500W\*\* median (23.7 kg) - verify structural support - Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof ## Questions ### How does the bifacial Runergy HY-DH96N11 panel differ from a standard monofacial module? The HY-DH96N11 uses a bifacial dual glass construction, meaning it generates power from both the front and rear side of the module. This lets it capture light reflected off the roof, ground, or bright surfaces, adding roughly a few to over ten percent extra energy yield without increasing the installation footprint. The result is a lower LCOE compared to classic monofacial panels. ### What does N-type cell technology mean in the Runergy HY-DH96N11 and is it better than P-type? The N-type cells on the 210R platform show lower degradation from LID, LeTID, and PID than conventional P-type cells, so the module retains more power in the early years and throughout its service life. Its lower temperature coefficient also means better performance on hot days and under low-light conditions, resulting in higher real-world annual energy yield. ### What warranty comes with the Runergy HY-DH96N11 series? Runergy offers a 12-year product warranty and a 30-year linear power warranty on this module. The product warranty covers material and workmanship defects for 12 years, while power output degradation follows a linear schedule guaranteed over 30 years, giving investors predictable long-term performance for ROI planning. ### How much power does the Runergy HY-DH96N11 produce and what installations is it suited for? The module reaches a maximum power output of 470 Wp. Thanks to its reinforced frame and tempered glass rated for high snow, wind, and hail loads, the HY-DH96N11 series works well for both commercial and industrial rooftop installations and ground-mounted solar farms exposed to harsh weather conditions. ### Is Runergy a tier 1 manufacturer and can it be trusted? Yes, Runergy is listed as a tier 1 manufacturer, which indicates financial stability, extensive manufacturing experience, and bankability for projects using these panels—an important factor for bank or leasing financing. Headquartered in China, the company applies strict production quality control, contributing to the reliability of the HY-DH96N11 series. ### Does the bifacial Runergy HY-DH96N11 require special mounting to benefit from bifacial gain? To fully utilize the dual glass module's potential, panels should be mounted on racking that allows airflow and light beneath the module, over a highly reflective surface such as gravel, white roofing membrane, or grass. On standard rooftops with dark roofing, the bifacial gain will be smaller, but the panel still performs reliably and benefits from its core N-type technology advantages. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/HY-DH96N11-Turbo-Global-Ver25Q4Bifacial_450-470W-2ea41976c8f7.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [Longi Solar LR7-54HJD-510M](https://comparepv.com/panel/longi-lr7-54hjd-510m) | 510 W | +50 W, cooler, +2.0 pp | | [AIKO AIKO-A495-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a495-mce54mw) | 495 W | +35 W, lighter, +1.8 pp | | [Longi Solar LR7-54HJD-505M](https://comparepv.com/panel/longi-lr7-54hjd-505m) | 505 W | +45 W, cooler, +1.7 pp | | [AIKO AIKO-A490-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a490-mce54mw) | 490 W | +30 W, lighter, +1.5 pp | | [Longi Solar LR7-54HJD-500M](https://comparepv.com/panel/longi-lr7-54hjd-500m) | 500 W | +40 W, cooler, +1.5 pp | | [Talesun CIPRO-TN9C54M-500W](https://comparepv.com/panel/talesun-cipro-tn9c54m-500w) | 500 W | +40 W, lighter, +1.5 pp | | [Runergy HY-DH96N11B-435](https://comparepv.com/panel/runergy-hy-dh96n11b-435) | 435 W | -25 W, -1.0 pp | | [Runergy HY-DH96N11B-440](https://comparepv.com/panel/runergy-hy-dh96n11b-440) | 440 W | -20 W, -1.0 pp | | [Runergy HY-DH96N11-445](https://comparepv.com/panel/runergy-hy-dh96n11-445) | 445 W | -15 W, -0.7 pp | | [Runergy HY-DH96N11B-450](https://comparepv.com/panel/runergy-hy-dh96n11b-450) | 450 W | -10 W, -0.5 pp | --- Source: https://comparepv.com/panel/runergy-hy-dh96n11-460 Not in this file, on the page: a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.