--- title: "Runergy HY-DH132N11-630 630W Solar Panel - Specs & Review | ComparePV" description: "Runergy HY-DH132N11-630 630W solar panel. Specs: 23.30% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/runergy-hy-dh132n11-630" updated: 2026-09-11 --- # Runergy HY-DH132N11-630 Space saver, heavy for its output 359 panels in the segment N-type 600-650 W ## Identity - **Manufacturer:** Runergy - **Model:** HY-DH132N11-630 - **Series:** HY-DH132N11 Pro Turbo - **Rated power:** 630 W - **Cell technology:** N-type - **Bifacial:** yes ## How it compares Compared against segment N-type 600-650 W (359 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 630 W | 625 W | Typical | | | Module efficiency | 23.30% | 22.77% | Strong - top 19% | 1,017 | | Power density | 233.2 | 227.7 | Strong - top 18% | 1,003 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,165 | | Weight (kg) | 41.0 kg | 32.5 kg | Weak - bottom 2% | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 23.30% | 22.77% | Strong - top 19% | 1,017 | | Power density | 233.2 | 227.7 | Strong - top 18% | 1,003 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,165 | | Weight per kWp | 65.1 | 52.7 | Weak - bottom 2% | 13,047 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Strengths - **233.2 watts per square metre** - Top 18% of the N-type 600-650 W segment, against a median of 227.7. - **23.30% module efficiency** - Top 19% of the N-type 600-650 W segment, against a median of 22.77%. ### Watch out for - **65.1 kg per kWp** - Bottom 2% of the N-type 600-650 W segment, against a median of 52.7. Ranked 13,047th in the whole database. - **Best for:** Utility-scale, commercial, hot-climate and shaded-installations. - **Not ideal for:** Weight-limited structures. ## Specification ### Electrical - **Rated power (Pmax):** 630 W - **Efficiency:** 23.30 % - **Voltage at Pmax (Vmp):** 41.89 V - **Current at Pmax (Imp):** 15.04 A - **Open-circuit voltage (Voc):** 49.31 V - **Short-circuit current (Isc):** 15.96 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.290 %/degC - **Temperature coefficient of Voc:** -0.250 %/degC - **Temperature coefficient of Isc:** 0.045 %/degC - **NOCT:** 45 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** N-type - **Cell count:** 132 - **Bifacial:** yes - **Bifacial gain:** 25.00 ### Physical - **Length:** 2382 mm - **Width:** 1134 mm - **Thickness:** 35 mm - **Weight:** 41.0 kg - **Area:** 2.70 m2 - **Power density:** 233.2 Wp/m2 ### Warranty and degradation - **Product warranty:** 12 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 87.4 % - **First-year degradation:** 1.00 % - **Annual degradation:** 0.40 % - **Output after 30 years:** 551 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 1017 of 14005 | | Power density | 1003 of 14005 | | Temperature coefficient | 2165 of 14005 | | Weight | 13047 of 14005 | | Warranty | 21 of 14005 | ## About this series The HY-DH132N11 Pro Turbo series from Runergy is engineered for utility-scale solar farms and large commercial installations, where every extra kilowatt-hour of yield matters. The panel is built on **N-Type cells using the 210R technology platform** in a half-cut cell layout, delivering higher production stability and reduced losses under partial shading. The **bifacial dual-glass design** allows the module to capture additional energy reflected off the ground on its rear side, boosting overall system output and lowering the levelized cost of energy (LCOE). The series stands out with its **low temperature coefficient** and improved low-light performance, maintaining high efficiency even in more demanding climate conditions. Another advantage is its **enhanced hail resistance**, thanks to thickened, fully tempered front glass, making the module a solid choice for sites exposed to extreme weather events. Strict manufacturing quality control combined with low annual degradation make this panel a recommended option for both utility-scale PV investors and EPC companies seeking a solution that pairs high unit power with long-term reliability and a predictable return on investment. ## Notable figures - At 23.3% efficiency, this panel is 0.5pp above typical \*\*N-type 600-650W\*\* modules (median: 22.8%) - Power density of 233.2 W/m² packs 5.5 W/m² more into the same footprint vs \*\*N-type 600-650W\*\* median (227.7 W/m²) - At -0.29%/°C, hot weather performance is typical for \*\*N-type 600-650W\*\* panels - Weight of 41.0 kg is 8.5 kg above \*\*N-type 600-650W\*\* median (32.5 kg) - verify structural support - Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof ## Questions ### How do the N-Type 210R cells in the Runergy HY-DH132N11 Pro Turbo series differ from standard P-Type cells? N-Type cells offer lower annual degradation and are free from LID (light-induced degradation), a common issue with older P-Type cells. The 210R platform combined with a half-cut cell layout further improves production stability and reduces power loss under partial shading, resulting in higher and more predictable energy yield over the module's lifetime. ### Does the bifacial design of the Runergy HY-DH132N11 Pro Turbo panels actually increase energy output? Yes, thanks to its dual-glass construction the module captures additional light reflected from the ground on its rear side. The actual gain depends on the albedo of the surface beneath the installation (e.g., light gravel, white roofing membrane) and mounting height, but in typical utility-scale installations it can add several to over ten percent more energy compared to a monofacial module of the same nominal power. ### What warranty comes with Runergy HY-DH132N11 Pro Turbo panels? The manufacturer provides a 12-year product warranty and a 30-year power performance warranty. This covers both material and workmanship defects as well as protection against power output dropping below the guaranteed level over the long term, which is important when calculating ROI for PV farm and commercial installation projects. ### Are Runergy HY-DH132N11 Pro Turbo modules suitable for hail-prone locations? Yes, the series uses thickened, fully tempered front glass with enhanced mechanical resistance, improving impact resistance against hail compared to standard modules. This is a key advantage for utility-scale installations in regions with volatile climate conditions and a higher risk of mechanical damage. ### How does the 650 Wp power rating of the HY-DH132N11 Pro Turbo affect the number of modules needed for a PV farm? A maximum power of 650 Wp is among the higher unit power values on the market, meaning fewer modules are needed to reach a target system capacity. This reduces costs for mounting structures, cabling, and installation labor, while also shortening installation time on large-scale solar farms. ### Is Runergy a Tier 1 manufacturer, and what does that mean for investors? Yes, Runergy holds Tier 1 manufacturer status, indicating financial stability, significant production capacity, and inclusion in leading module bankability rankings. For investors, this translates to lower project financing risk, easier access to bank funding, and greater assurance that the manufacturer will remain operational throughout the full warranty period. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/HY-DH132N11-Turbo-Pro-Global-Ver25Q4620-650W-19a4499447e6.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [AIKO AIKO-A650-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a650-mae72mw) | 650 W | Cooler, lighter, +1.9 pp | | [AIKO AIKO-A680-MDE72Mw](https://comparepv.com/panel/aiko-aiko-a680-mde72mw) | 680 W | +50 W, lighter, +1.9 pp | | [AIKO AIKO-A675-MDE72Mw](https://comparepv.com/panel/aiko-aiko-a675-mde72mw) | 675 W | +45 W, lighter, +1.7 pp | | [AIKO AIKO-A645-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a645-mae72mw) | 645 W | Cooler, lighter, +1.7 pp | | [AIKO AIKO-G670-MCH72Mw](https://comparepv.com/panel/aiko-aiko-g670-mch72mw) | 670 W | +40 W, lighter, +1.5 pp | | [Longi Solar LR7-72HVHF-670M](https://comparepv.com/panel/longi-lr7-72hvhf-670m) | 670 W | +40 W, lighter, +1.5 pp | | [AIKO AIKO-A640-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a640-mae72mw) | 640 W | Cooler, lighter, +1.5 pp | | [Runergy HY-DH132N11-600](https://comparepv.com/panel/runergy-hy-dh132n11-600) | 600 W | -30 W, -1.1 pp | | [Runergy HY-DH132N11-605](https://comparepv.com/panel/runergy-hy-dh132n11-605) | 605 W | -25 W, -0.9 pp | | [Runergy HY-DH132N11-610](https://comparepv.com/panel/runergy-hy-dh132n11-610) | 610 W | -20 W, -0.7 pp | | [Runergy HY-DH132N11-615](https://comparepv.com/panel/runergy-hy-dh132n11-615) | 615 W | -15 W, -0.5 pp | | [Runergy HY-DH132N11-620](https://comparepv.com/panel/runergy-hy-dh132n11-620) | 620 W | -10 W, -0.3 pp | | [Runergy HY-DH132N11-625](https://comparepv.com/panel/runergy-hy-dh132n11-625) | 625 W | Very close match | | [Runergy HY-DH132N11-635](https://comparepv.com/panel/runergy-hy-dh132n11-635) | 635 W | Very close match | | [Runergy HY-DH132N11-640](https://comparepv.com/panel/runergy-hy-dh132n11-640) | 640 W | +10 W, +0.4 pp | | [Runergy HY-DH132N11-645](https://comparepv.com/panel/runergy-hy-dh132n11-645) | 645 W | +15 W, +0.6 pp | | [AIKO AIKO-A700-MAE78Dw](https://comparepv.com/panel/aiko-aiko-a700-mae78dw) | 700 W | +70 W, lighter, +1.7 pp | --- Source: https://comparepv.com/panel/runergy-hy-dh132n11-630 Not in this file, on the page: a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.