--- title: "Runergy HY-DH132N11-610 610W Solar Panel - Specs & Review | ComparePV" description: "Runergy HY-DH132N11-610 610W solar panel. Specs: 22.60% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/runergy-hy-dh132n11-610" updated: 2026-09-12 --- # Runergy HY-DH132N11-610 Middle of its segment, heavy for its output 359 panels in the segment N-type 600-650 W ## Identity - **Manufacturer:** Runergy - **Model:** HY-DH132N11-610 - **Series:** HY-DH132N11 Pro - **Rated power:** 610 W - **Cell technology:** N-type - **Bifacial:** yes ## How it compares Compared against segment N-type 600-650 W (359 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 610 W | 625 W | Weak - bottom 17% | | | Module efficiency | 22.60% | 22.77% | Typical | 3,658 | | Power density | 225.8 | 227.7 | Typical | 3,729 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,165 | | Weight (kg) | 41.0 kg | 32.5 kg | Weak - bottom 1% | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 22.60% | 22.77% | Typical | 3,658 | | Power density | 225.8 | 227.7 | Typical | 3,729 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,165 | | Weight per kWp | 67.2 | 52.7 | Weak - bottom 1% | 13,224 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Watch out for - **67.2 kg per kWp** - Bottom 1% of the N-type 600-650 W segment, against a median of 52.7. Ranked 13,224th in the whole database. - **Best for:** Utility-scale, commercial and shaded-installations. - **Not ideal for:** Weight-limited structures. ## Specification ### Electrical - **Rated power (Pmax):** 610 W - **Efficiency:** 22.60 % - **Voltage at Pmax (Vmp):** 40.78 V - **Current at Pmax (Imp):** 14.96 A - **Open-circuit voltage (Voc):** 48.51 V - **Short-circuit current (Isc):** 15.84 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.290 %/degC - **Temperature coefficient of Voc:** -0.250 %/degC - **Temperature coefficient of Isc:** 0.045 %/degC - **NOCT:** 45 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** N-type - **Cell count:** 132 - **Bifacial:** yes - **Bifacial gain:** 25.00 ### Physical - **Length:** 2382 mm - **Width:** 1134 mm - **Thickness:** 35 mm - **Weight:** 41.0 kg - **Area:** 2.70 m2 - **Power density:** 225.8 Wp/m2 ### Warranty and degradation - **Product warranty:** 12 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 87.4 % - **First-year degradation:** 1.00 % - **Annual degradation:** 0.40 % - **Output after 30 years:** 533 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 3658 of 14005 | | Power density | 3729 of 14005 | | Temperature coefficient | 2165 of 14005 | | Weight | 13224 of 14005 | | Warranty | 21 of 14005 | ## About this series The HY-DH132N11 Pro series represents Runergy's flagship modules, engineered for utility-scale ground-mount projects and large industrial or commercial installations. At their core are **N-type TOPCon cells** in a **half-cut** architecture, arranged in a 132-cell configuration that reduces resistive losses and delivers more stable performance under partial shading. The panel features **bifacial technology in a dual-glass construction**, allowing it to harvest additional energy from the rear side through light reflected off the ground or mounting surface. This meaningfully boosts total energy yield from the same rooftop or land footprint, driving down the levelized cost of energy (LCOE) over the full lifetime of the system. The Pro series also stands out for its **low temperature coefficient**, meaning less performance loss during hot weather, along with a rugged build designed to withstand mechanical loads and the variable climate conditions typical of Poland. This makes it a strong fit for solar farm investors, industrial project developers, and owners of large warehouse rooftops seeking high power density and predictable returns over decades of operation. ## Notable figures - At 22.6% efficiency, this panel is on par with typical \*\*N-type 600-650W\*\* modules - Power density of 225.8 W/m² matches the \*\*N-type 600-650W\*\* median - At -0.29%/°C, hot weather performance is typical for \*\*N-type 600-650W\*\* panels - At 41.0 kg, this panel is 8.5 kg heavier than the \*\*N-type 600-650W\*\* median (32.5 kg) - more demanding for installation crews - Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof ## Questions ### What is the maximum power output of Runergy HY-DH132N11 Pro panels and which installations are they suited for? The HY-DH132N11 Pro series reaches up to 615 Wp, delivering very high power density per square meter. This makes it particularly well suited for large ground-mounted installations, solar farms, and expansive warehouse or industrial roofs, where maximizing energy yield from limited surface area is the priority. ### What is bifacial dual-glass technology in Runergy Pro panels, and does it really increase energy output? Bifacial dual-glass technology means the module has glass on both sides, allowing the cells to capture sunlight not only from the front but also reflected light from the ground on the rear side. In practice, with a light-colored surface or ground-mounted setup, this can boost total energy production by several to over a dozen percent compared to a monofacial panel, lowering the LCOE over the system's lifetime. ### How do N-type TOPCon cells in the Runergy HY-DH132N11 Pro differ from standard P-type cells? N-type TOPCon cells offer higher efficiency and lower resistive losses than traditional P-type PERC cells, while also showing better resistance to light-induced degradation (LID) and potential-induced degradation (PID). This series uses them in a half-cut architecture with a 132-cell configuration, improving module performance under partial shading and increasing long-term stability. ### What warranty comes with Runergy HY-DH132N11 Pro panels and what does it cover? The manufacturer provides a 12-year product warranty covering material and workmanship defects, along with a 30-year linear power output warranty. This means that after 30 years of operation, the panel should still deliver a guaranteed percentage of its initial rated power, a key factor when calculating long-term ROI for large industrial or utility-scale projects. ### Do Runergy HY-DH132N11 Pro panels perform well in high summer temperatures? Yes, the Pro series features a low temperature coefficient, meaning it loses less power output during hot weather compared to older P-type technology. This is especially important for large ground-mounted installations, where panels are exposed to intense heat throughout the day, and stable summer performance directly affects the system's annual energy yield. ### Is Runergy a Tier 1 manufacturer, and can it be trusted for a large-scale investment? Yes, Runergy is listed as a Tier 1 manufacturer, reflecting long-term financial stability, proven large-scale production, and backing from established banking institutions. Headquartered in China, the company is a significant global supplier of PV modules, which supports the credibility of its long-term warranty and service availability for large commercial and industrial projects. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/HY-DH132N11-Pro-Global-Ver25Q4600-630W-404689a472a4.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [AIKO AIKO-A650-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a650-mae72mw) | 650 W | +40 W, lighter, +2.6 pp | | [AIKO AIKO-A645-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a645-mae72mw) | 645 W | +35 W, lighter, +2.4 pp | | [Longi Solar LR7-60HVH-560M](https://comparepv.com/panel/longi-lr7-60hvh-560m) | 560 W | -50 W, 16 kg lighter, +2.2 pp | | [AIKO AIKO-A640-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a640-mae72mw) | 640 W | +30 W, lighter, +2.2 pp | | [AIKO AIKO-A635-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a635-mae72mw) | 635 W | Cooler, lighter, +2.0 pp | | [Longi Solar LR8-66HVD-660M](https://comparepv.com/panel/longi-lr8-66hvd-660m) | 660 W | +50 W, lighter, +1.8 pp | | [Runergy HY-DH132N11-600](https://comparepv.com/panel/runergy-hy-dh132n11-600) | 600 W | -10 W, -0.4 pp | | [Runergy HY-DH132N11-605](https://comparepv.com/panel/runergy-hy-dh132n11-605) | 605 W | -0.2 pp | | [Runergy HY-DH132N11-615](https://comparepv.com/panel/runergy-hy-dh132n11-615) | 615 W | Very close match | | [Runergy HY-DH132N11-620](https://comparepv.com/panel/runergy-hy-dh132n11-620) | 620 W | +10 W, +0.4 pp | | [Runergy HY-DH132N11-625](https://comparepv.com/panel/runergy-hy-dh132n11-625) | 625 W | +15 W, +0.5 pp | | [Runergy HY-DH132N11-630](https://comparepv.com/panel/runergy-hy-dh132n11-630) | 630 W | +20 W, +0.7 pp | | [Runergy HY-DH132N11-635](https://comparepv.com/panel/runergy-hy-dh132n11-635) | 635 W | +25 W, +0.9 pp | | [Runergy HY-DH132N11-640](https://comparepv.com/panel/runergy-hy-dh132n11-640) | 640 W | +30 W, +1.1 pp | | [Runergy HY-DH132N11-645](https://comparepv.com/panel/runergy-hy-dh132n11-645) | 645 W | +35 W, +1.3 pp | | [AIKO AIKO-A680-MDE72Mw](https://comparepv.com/panel/aiko-aiko-a680-mde72mw) | 680 W | +70 W, lighter, +2.6 pp | --- Source: https://comparepv.com/panel/runergy-hy-dh132n11-610 Not in this file, on the page: a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.