--- title: "Runergy HY-DH132N10-730 730W Solar Panel - Specs & Review | ComparePV" description: "Runergy HY-DH132N10-730 730W solar panel. Specs: 23.50% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/runergy-hy-dh132n10-730" updated: 2026-09-11 --- # Runergy HY-DH132N10-730 Efficiency leader, no clear weak spot 90 panels in the segment N-type 700-750 W ## Identity - **Manufacturer:** Runergy - **Model:** HY-DH132N10-730 - **Series:** HY-DH132N10 Plus - **Rated power:** 730 W - **Cell technology:** N-type - **Bifacial:** yes ## How it compares Compared against segment N-type 700-750 W (90 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 730 W | 710 W | Strong - top 5% | | | Module efficiency | 23.50% | 22.88% | Strong - top 5% | 716 | | Power density | 235.0 | 228.6 | Strong - top 5% | 800 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,165 | | Weight (kg) | 38.5 kg | 38.0 kg | Typical | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 23.50% | 22.88% | Strong - top 5% | 716 | | Power density | 235.0 | 228.6 | Strong - top 5% | 800 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,165 | | Weight per kWp | 52.7 | 53.5 | Typical | 6,396 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Strengths - **23.50% module efficiency** - Top 5% of the N-type 700-750 W segment, against a median of 22.88%. Ranked 716th in the whole database. - **235.0 watts per square metre** - Top 5% of the N-type 700-750 W segment, against a median of 228.6. Ranked 800th in the whole database. - **Best for:** Commercial, utility-scale and shaded-installations. ## Specification ### Electrical - **Rated power (Pmax):** 730 W - **Efficiency:** 23.50 % - **Voltage at Pmax (Vmp):** 41.67 V - **Current at Pmax (Imp):** 17.52 A - **Open-circuit voltage (Voc):** 49.77 V - **Short-circuit current (Isc):** 18.59 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.290 %/degC - **Temperature coefficient of Voc:** -0.250 %/degC - **Temperature coefficient of Isc:** 0.045 %/degC - **NOCT:** 42 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** N-type - **Cell count:** 132 - **Bifacial:** yes - **Bifacial gain:** 25.00 ### Physical - **Length:** 2384 mm - **Width:** 1303 mm - **Thickness:** 35 mm - **Weight:** 38.5 kg - **Area:** 3.11 m2 - **Power density:** 235.0 Wp/m2 ### Warranty and degradation - **Product warranty:** 12 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 87.4 % - **First-year degradation:** 1.00 % - **Annual degradation:** 0.40 % - **Output after 30 years:** 638 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 716 of 14005 | | Power density | 800 of 14005 | | Temperature coefficient | 2165 of 14005 | | Weight | 6396 of 14005 | | Warranty | 21 of 14005 | ## About this series The HY-DH132N10 Plus series is Runergy's answer for installations that demand maximum energy efficiency on limited roof or ground area. The modules are built on **N-Type TOPCon technology** combined with the G12 wafer platform, delivering stable performance even at elevated module temperatures typical of Polish summers. The use of **half-cut cells** reduces resistive losses and improves resistance to microcracks and partial shading, which matters for irregular roof layouts. The dual-glass, **bifacial construction** captures light reflected off the ground, boosting energy yield without increasing the footprint of the installation - an attractive solution for ground-mount farms and installations over light-colored surfaces. Thanks to the characteristics of N-Type cells, the module stands out with **low annual power degradation** and resistance to LID and LeTID effects, translating into predictable energy output throughout its service life. The series suits both residential prosumer setups and commercial PV farm projects, where long-term reliability and a low levelized cost of energy per installed watt matter most. It's a solution for investors seeking a balance between high performance and long-term durability. ## Notable figures - 23.5% module efficiency - 0.6pp better than the \*\*N-type 700-750W\*\* median of 22.9% - At 235.0 W/m² power density, this panel generates 6.4 W/m² more per unit area than \*\*N-type 700-750W\*\* median (228.6 W/m²) - At -0.29%/°C, hot weather performance is typical for \*\*N-type 700-750W\*\* panels - Bifaciality factor of 80% can add 4-12% extra yield with reflective mounting surface - In the top 5% for efficiency among all N-type panels ## Questions ### How does N-type TOPCon technology in the Runergy HY-DH132N10 Plus differ from standard PERC panels? N-type TOPCon cells feature an additional passivation layer that reduces carrier recombination and increases energy conversion efficiency compared to PERC cells. This results in higher power output (up to 730 Wp) and better performance at elevated temperatures, which matters during summer when module temperatures can exceed 60°C on a roof. ### Is it worth installing bifacial Runergy HY-DH132N10 Plus panels on a light-colored roof? Yes, the dual-glass bifacial construction captures light reflected from the surface below, so light, reflective surfaces such as white gravel, roofing membrane, or light concrete boost energy yield further, often by several percent compared to a monofacial module. On darker roofs the effect is smaller, but the panel still performs normally on the front side. ### What warranty comes with Runergy HY-DH132N10 Plus panels? The manufacturer provides a 12-year product warranty and a 30-year linear power output warranty. Thanks to the characteristics of N-type cells, annual power degradation is low, and the module maintains high energy yield throughout most of its service life, resulting in a predictable return on investment. ### Are half-cut cells in the HY-DH132N10 Plus series more resistant to shading and microcracks? Yes, splitting cells in half reduces resistive losses and means partial shading, from a chimney or antenna for example, causes a smaller drop in total panel output. The half-cut design also increases mechanical resistance to microcracks during transport and installation, which matters on uneven roof surfaces. ### Is Runergy a reliable solar panel manufacturer? Runergy is a China-based manufacturer holding Tier 1 status, meaning it appears on the list of reputable PV module suppliers backed by financial stability and production scale. Tier 1 status also makes it easier to secure financing and insurance for the installation, since banks and insurers treat such manufacturers as lower risk. ### Is the Runergy HY-DH132N10 Plus series better suited for residential or commercial installations? The series works well for both residential rooftop installations and large commercial or ground-mount solar farm projects. The high power output per panel (730 Wp) reduces the number of modules needed to reach a target system capacity, lowering costs for mounting structures and labor on larger projects. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/HY-DH132N10-Plus-Global-Ver25Q4700-730W-bccb9ec3e4fd.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [AIKO AIKO-A680-MDE72Mw](https://comparepv.com/panel/aiko-aiko-a680-mde72mw) | 680 W | -50 W, lighter, +1.7 pp | | [AIKO AIKO-A700-MAE78Dw](https://comparepv.com/panel/aiko-aiko-a700-mae78dw) | 700 W | -30 W, lighter, +1.5 pp | | [AIKO AIKO-A695-MAE78Dw](https://comparepv.com/panel/aiko-aiko-a695-mae78dw) | 695 W | -35 W, lighter, +1.4 pp | | [AIKO AIKO-A690-MAE78Dw](https://comparepv.com/panel/aiko-aiko-a690-mae78dw) | 690 W | -40 W, lighter, +1.2 pp | | [AIKO AIKO-A685-MAE78Dw](https://comparepv.com/panel/aiko-aiko-a685-mae78dw) | 685 W | -45 W, lighter, +1.0 pp | | [Trina Solar TSM-NEG21C.20Q-760](https://comparepv.com/panel/trina-solar-tsm-neg21c-20q-760) | 760 W | +30 W, cooler, +1.0 pp | | [AIKO AIKO-A680-MAH78Dw](https://comparepv.com/panel/aiko-aiko-a680-mah78dw) | 680 W | -50 W, lighter, +0.8 pp | | [Gokin GK-4-78HGBD-780M](https://comparepv.com/panel/gokin-gk-4-78hgbd-780m) | 780 W | +50 W, cooler, +0.8 pp | | [AIKO AIKO-A780-GRH78Dw](https://comparepv.com/panel/aiko-aiko-a780-grh78dw) | 780 W | +50 W, cooler, +0.8 pp | | [Runergy SS9-66HD-645M](https://comparepv.com/panel/runergy-ss9-66hd-645m) | 645 W | -85 W, hotter, -2.7 pp | | [Runergy SS9-66HD-650M](https://comparepv.com/panel/runergy-ss9-66hd-650m) | 650 W | -80 W, hotter, -2.6 pp | | [Runergy SS9-66HS-655M](https://comparepv.com/panel/runergy-ss9-66hs-655m) | 655 W | -75 W, lighter, -2.4 pp | | [Runergy SS9-66HD-660M](https://comparepv.com/panel/runergy-ss9-66hd-660m) | 660 W | -70 W, hotter, -2.2 pp | | [Runergy SS9-66HD-665M](https://comparepv.com/panel/runergy-ss9-66hd-665m) | 665 W | -65 W, hotter, -2.1 pp | | [Runergy SS9-66HS-670M](https://comparepv.com/panel/runergy-ss9-66hs-670m) | 670 W | -60 W, lighter, -1.9 pp | | [AIKO AIKO-A805-GRH78Dw](https://comparepv.com/panel/aiko-aiko-a805-grh78dw) | 805 W | +75 W, cooler, +1.6 pp | --- Source: https://comparepv.com/panel/runergy-hy-dh132n10-730 Not in this file, on the page: a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.