--- title: "Runergy HY-DH132N10-720 Solar Panel: Specs & Datasheet | ComparePV" description: "Runergy HY-DH132N10-720 solar panel. Specs: 23.20% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/runergy-hy-dh132n10-720" image: "https://comparepv.com/og/panel/runergy-hy-dh132n10-720.png" updated: 2026-09-11 --- # Runergy HY-DH132N10-720 Efficiency leader, no clear weak spot 93 panels in the segment N-type 700-750 W ## Identity - **Manufacturer:** Runergy - **Model:** HY-DH132N10-720 - **Series:** HY-DH132N10 Plus - **Rated power:** 720 W - **Cell technology:** N-type - **Bifacial:** yes ## How it compares Compared against segment N-type 700-750 W (93 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 720 W | 710 W | Strong - top 23% | | | Module efficiency | 23.20% | 22.90% | Strong - top 18% | 1,349 | | Power density | 231.8 | 228.6 | Strong - top 23% | 1,390 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,220 | | Weight (kg) | 38.5 kg | 37.9 kg | Typical | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 23.20% | 22.90% | Strong - top 18% | 1,349 | | Power density | 231.8 | 228.6 | Strong - top 23% | 1,390 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,220 | | Weight per kWp | 53.5 | 53.4 | Typical | 7,493 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Strengths - **23.20% module efficiency** - Top 18% of the N-type 700-750 W segment, against a median of 22.90%. - **231.8 watts per square metre** - Top 23% of the N-type 700-750 W segment, against a median of 228.6. - **Best for:** Commercial, utility-scale and shaded-installations. ## Specification ### Electrical - **Rated power (Pmax):** 720 W - **Efficiency:** 23.20 % - **Voltage at Pmax (Vmp):** 41.29 V - **Current at Pmax (Imp):** 17.44 A - **Open-circuit voltage (Voc):** 49.39 V - **Short-circuit current (Isc):** 18.49 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.290 %/degC - **Temperature coefficient of Voc:** -0.250 %/degC - **Temperature coefficient of Isc:** 0.045 %/degC - **NOCT:** 42 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** N-type - **Cell count:** 132 - **Bifacial:** yes - **Bifacial gain:** 25.00 ### Physical - **Length:** 2384 mm - **Width:** 1303 mm - **Thickness:** 35 mm - **Weight:** 38.5 kg - **Area:** 3.11 m2 - **Power density:** 231.8 Wp/m2 ### Warranty and degradation - **Product warranty:** 12 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 87.4 % - **First-year degradation:** 1.00 % - **Annual degradation:** 0.40 % - **Output after 30 years:** 629 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 1349 of 14129 | | Power density | 1390 of 14129 | | Temperature coefficient | 2220 of 14129 | | Weight | 7493 of 14129 | | Warranty | 21 of 14129 | ## About this series The HY-DH132N10 Plus series is Runergy's answer for installations that demand maximum energy efficiency on limited roof or ground area. The modules are built on **N-Type TOPCon technology** combined with the G12 wafer platform, delivering stable performance even at elevated module temperatures typical of Polish summers. The use of **half-cut cells** reduces resistive losses and improves resistance to microcracks and partial shading, which matters for irregular roof layouts. The dual-glass, **bifacial construction** captures light reflected off the ground, boosting energy yield without increasing the footprint of the installation - an attractive solution for ground-mount farms and installations over light-colored surfaces. Thanks to the characteristics of N-Type cells, the module stands out with **low annual power degradation** and resistance to LID and LeTID effects, translating into predictable energy output throughout its service life. The series suits both residential prosumer setups and commercial PV farm projects, where long-term reliability and a low levelized cost of energy per installed watt matter most. It's a solution for investors seeking a balance between high performance and long-term durability. ## Notable figures - At 23.2% efficiency, this panel is on par with typical \*\*N-type 700-750W\*\* modules - At 231.8 W/m² power density, this panel generates 3.2 W/m² more per unit area than \*\*N-type 700-750W\*\* median (228.6 W/m²) - Temperature coefficient of -0.29%/°C matches the \*\*N-type 700-750W\*\* median - Bifaciality factor of 80% can add 4-12% extra yield with reflective mounting surface - In the top 10% for efficiency among all N-type panels ## Questions ### How does N-type TOPCon technology in the Runergy HY-DH132N10 Plus differ from standard PERC panels? N-type TOPCon cells feature an additional passivation layer that reduces carrier recombination and increases energy conversion efficiency compared to PERC cells. This results in higher power output (up to 730 Wp) and better performance at elevated temperatures, which matters during summer when module temperatures can exceed 60°C on a roof. ### Is it worth installing bifacial Runergy HY-DH132N10 Plus panels on a light-colored roof? Yes, the dual-glass bifacial construction captures light reflected from the surface below, so light, reflective surfaces such as white gravel, roofing membrane, or light concrete boost energy yield further, often by several percent compared to a monofacial module. On darker roofs the effect is smaller, but the panel still performs normally on the front side. ### What warranty comes with Runergy HY-DH132N10 Plus panels? The manufacturer provides a 12-year product warranty and a 30-year linear power output warranty. Thanks to the characteristics of N-type cells, annual power degradation is low, and the module maintains high energy yield throughout most of its service life, resulting in a predictable return on investment. ### Are half-cut cells in the HY-DH132N10 Plus series more resistant to shading and microcracks? Yes, splitting cells in half reduces resistive losses and means partial shading, from a chimney or antenna for example, causes a smaller drop in total panel output. The half-cut design also increases mechanical resistance to microcracks during transport and installation, which matters on uneven roof surfaces. ### Is Runergy a reliable solar panel manufacturer? Runergy is a China-based manufacturer holding Tier 1 status, meaning it appears on the list of reputable PV module suppliers backed by financial stability and production scale. Tier 1 status also makes it easier to secure financing and insurance for the installation, since banks and insurers treat such manufacturers as lower risk. ### Is the Runergy HY-DH132N10 Plus series better suited for residential or commercial installations? The series works well for both residential rooftop installations and large commercial or ground-mount solar farm projects. The high power output per panel (730 Wp) reduces the number of modules needed to reach a target system capacity, lowering costs for mounting structures and labor on larger projects. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/HY-DH132N10-Plus-Global-Ver25Q4700-730W-bccb9ec3e4fd.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [AIKO AIKO-A680-MDE72Mw](https://comparepv.com/panel/aiko-aiko-a680-mde72mw) | 680 W | -40 W, lighter, +2.0 pp | | [AIKO AIKO-A675-MDE72Mw](https://comparepv.com/panel/aiko-aiko-a675-mde72mw) | 675 W | -45 W, lighter, +1.8 pp | | [AIKO AIKO-A700-MAE78Dw](https://comparepv.com/panel/aiko-aiko-a700-mae78dw) | 700 W | Cooler, lighter, +1.8 pp | | [WINAICO WST-675BKX72-A2](https://comparepv.com/panel/winaico-wst-675bkx72-a2) | 675 W | -45 W, lighter, +1.8 pp | | [AIKO AIKO-A695-MAE78Dw](https://comparepv.com/panel/aiko-aiko-a695-mae78dw) | 695 W | Cooler, lighter, +1.7 pp | | [AIKO AIKO-G670-MCH72Mw](https://comparepv.com/panel/aiko-aiko-g670-mch72mw) | 670 W | -50 W, lighter, +1.6 pp | | [Longi Solar LR7-72HVHF-670M](https://comparepv.com/panel/longi-lr7-72hvhf-670m) | 670 W | -50 W, lighter, +1.6 pp | | [Jinko Solar JKM650-670N-66QL6-BDV (670W class)](https://comparepv.com/panel/jinko-solar-jkm650-670n-66ql6-bdv-670w-class) | 670 W | -50 W, lighter, +1.6 pp | | [Runergy SS9-66HD-645M](https://comparepv.com/panel/runergy-ss9-66hd-645m) | 645 W | -75 W, hotter, -2.4 pp | | [Runergy SS9-66HD-650M](https://comparepv.com/panel/runergy-ss9-66hd-650m) | 650 W | -70 W, hotter, -2.3 pp | | [Runergy SS9-66HS-655M](https://comparepv.com/panel/runergy-ss9-66hs-655m) | 655 W | -65 W, lighter, -2.1 pp | | [Runergy SS9-66HD-660M](https://comparepv.com/panel/runergy-ss9-66hd-660m) | 660 W | -60 W, hotter, -1.9 pp | | [Runergy SS9-66HD-665M](https://comparepv.com/panel/runergy-ss9-66hd-665m) | 665 W | -55 W, hotter, -1.8 pp | | [Runergy SS9-66HS-670M](https://comparepv.com/panel/runergy-ss9-66hs-670m) | 670 W | Hotter, lighter, -1.6 pp | | [AIKO AIKO-A805-GRH78Dw](https://comparepv.com/panel/aiko-aiko-a805-grh78dw) | 805 W | +85 W, cooler, +1.9 pp | | [AIKO AIKO-A800-GRH78Dw](https://comparepv.com/panel/aiko-aiko-a800-grh78dw) | 800 W | +80 W, cooler, +1.7 pp | --- Source: https://comparepv.com/panel/runergy-hy-dh132n10-720 Not in this file, on the page: the I-V and temperature curves lifted from the manufacturer's datasheet, a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.