--- title: "Runergy HY-DH132H10-720 720W Solar Panel - Specs & Review | ComparePV" description: "Runergy HY-DH132H10-720 720W solar panel. Specs: 23.20% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/runergy-hy-dh132h10-720" updated: 2026-09-11 --- # Runergy HY-DH132H10-720 Middle of its segment, weak in heat 222 panels in the segment HJT 700-750 W ## Identity - **Manufacturer:** Runergy - **Model:** HY-DH132H10-720 - **Series:** HY-DH132H10 - **Rated power:** 720 W - **Cell technology:** HJT - **Bifacial:** yes ## How it compares Compared against segment HJT 700-750 W (222 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 720 W | 715 W | Typical | | | Module efficiency | 23.20% | 23.02% | Typical | 1,306 | | Power density | 231.8 | 230.2 | Typical | 1,347 | | Temperature coefficient | -0.260 | -0.240 | Weak - bottom 18% | 511 | | Weight (kg) | 38.3 kg | 38.3 kg | Typical | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 23.20% | 23.02% | Typical | 1,306 | | Power density | 231.8 | 230.2 | Typical | 1,347 | | Temperature coefficient | -0.260 | -0.240 | Weak - bottom 18% | 511 | | Weight per kWp | 53.2 | 53.6 | Typical | 7,025 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Watch out for - **-0.260 %/°C temperature coefficient** - Bottom 18% of the HJT 700-750 W segment, against a median of -0.240. - **Best for:** Utility-scale, commercial and hot-climate. - **Not ideal for:** Hot climates. ## Specification ### Electrical - **Rated power (Pmax):** 720 W - **Efficiency:** 23.20 % - **Voltage at Pmax (Vmp):** 42.68 V - **Current at Pmax (Imp):** 16.87 A - **Open-circuit voltage (Voc):** 50.74 V - **Short-circuit current (Isc):** 17.67 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.260 %/degC - **Temperature coefficient of Voc:** -0.240 %/degC - **Temperature coefficient of Isc:** 0.040 %/degC - **NOCT:** 45 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** HJT - **Cell count:** 132 - **Bifacial:** yes - **Bifacial gain:** 25.00 ### Physical - **Length:** 2384 mm - **Width:** 1303 mm - **Thickness:** 33 mm - **Weight:** 38.3 kg - **Area:** 3.11 m2 - **Power density:** 231.8 Wp/m2 ### Warranty and degradation - **Product warranty:** 12 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 88.0 % - **First-year degradation:** 1.00 % - **Annual degradation:** 0.38 % - **Output after 30 years:** 633 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 1306 of 14005 | | Power density | 1347 of 14005 | | Temperature coefficient | 511 of 14005 | | Weight | 7025 of 14005 | | Warranty | 21 of 14005 | ## About this series The HY-DH132H10 is a photovoltaic module built on **heterojunction (HJT) technology** and a 210 mm cell platform, combining high conversion efficiency with exceptional long-term stability. Its **half-cut cells** in a dual-glass configuration make the panel **bifacial**, capable of capturing light reflected from the ground, which translates into a genuinely higher energy yield from the same rooftop or ground area. This design targets investors seeking maximum output per square meter and a lower LCOE over the entire lifetime of the installation. The HJT construction makes the module **resistant to LID, LeTID and PID degradation**, allowing it to maintain high power output even after years of operation in demanding climates, while a low temperature coefficient ensures more stable energy production on hot days. A robust frame paired with tempered glass delivers **high mechanical durability** against snow, wind, and hail loads, making this panel a strong choice for both utility-scale solar farms and demanding commercial installations where long-term reliability and predictable return on investment matter most. ## Notable figures - Efficiency of 23.2% matches the \*\*HJT 700-750W\*\* median - At 231.8 W/m² power density, roof space requirements are typical for \*\*HJT 700-750W\*\* panels - -0.26%/°C temperature coefficient - 0.02pp worse than \*\*HJT 700-750W\*\* median (-0.24%/°C), expect higher hot weather losses - Bifaciality factor of 85% can add 4-13% extra yield with reflective mounting surface - Ranked #1306 out of 14005 panels for efficiency in the database ## Questions ### How does HJT technology in the Runergy HY-DH132H10 panel differ from standard PERC or TOPCon cells? HJT cells combine crystalline silicon with a thin amorphous silicon layer, delivering higher conversion efficiency and a significantly lower temperature coefficient than PERC or TOPCon. This means the HY-DH132H10 loses less power output on hot days and holds up better over long-term operation. HJT cells also offer inherent resistance to LID and LeTID degradation, resulting in more stable energy yield throughout the warranty period. ### Does the bifacial design of the HY-DH132H10 panel actually increase energy production? Yes, the dual-glass construction with half-cut cells allows the rear side of the module to capture light reflected from the roof, ground, or a light-colored surface. Depending on the albedo of the surrounding surface and mounting height, additional yield can range from a few to over ten percent annually. The biggest gains occur when installed above light gravel, white membrane roofing, or metal sheeting with high reflectivity. ### What warranty comes with the Runergy HY-DH132H10 panels? The manufacturer provides a 12-year product warranty along with a 30-year power output warranty, which is standard for premium-class HJT modules. This extended power warranty reflects the slower degradation rate of heterojunction cells compared to older cell technologies and contributes to a lower LCOE over the system's full operating lifetime. ### Is Runergy a trustworthy, reliable manufacturer for solar panels? Runergy is a tier 1 manufacturer headquartered in China, meaning it meets the strict financial stability and bankability criteria used by industry analysts to rank PV suppliers. Tier 1 status makes it easier to secure bank financing or leasing for a project and adds confidence that warranty claims will be honored over the long term. ### What is the maximum power output of the HY-DH132H10 panel and which installations suit it best? The module reaches a maximum power output of 740 Wp, placing it among high-power panels built on the 210 mm cell platform. This high per-unit power reduces the number of panels needed to reach a target system capacity, lowering mounting structure and labor costs. The panel suits both large-scale solar farms and demanding commercial and industrial installations. ### Is the HY-DH132H10 panel resistant to hail and heavy snow loads? Yes, the module features tempered glass and a robust aluminum frame engineered to withstand high mechanical loads from wind, snow, and hail impact. The dual-glass construction adds extra rigidity and helps protect against microcracks, which is especially important for installations in regions with harsh climate conditions. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/HY-DH132H10-Global-Ver25Q4700-740W-479bbfc7be03.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [AIKO AIKO-A680-MDE72Mw](https://comparepv.com/panel/aiko-aiko-a680-mde72mw) | 680 W | -40 W, lighter, +2.0 pp | | [AIKO AIKO-A675-MDE72Mw](https://comparepv.com/panel/aiko-aiko-a675-mde72mw) | 675 W | -45 W, lighter, +1.8 pp | | [AIKO AIKO-A700-MAE78Dw](https://comparepv.com/panel/aiko-aiko-a700-mae78dw) | 700 W | -20 W, lighter, +1.8 pp | | [AIKO AIKO-A695-MAE78Dw](https://comparepv.com/panel/aiko-aiko-a695-mae78dw) | 695 W | -25 W, lighter, +1.7 pp | | [AIKO AIKO-G670-MCH72Mw](https://comparepv.com/panel/aiko-aiko-g670-mch72mw) | 670 W | -50 W, lighter, +1.6 pp | | [Longi Solar LR7-72HVHF-670M](https://comparepv.com/panel/longi-lr7-72hvhf-670m) | 670 W | -50 W, lighter, +1.6 pp | | [Jinko Solar JKM650-670N-66QL6-BDV (670W class)](https://comparepv.com/panel/jinko-solar-jkm650-670n-66ql6-bdv-670w-class) | 670 W | -50 W, lighter, +1.6 pp | | [Runergy SS9-66HD-645M](https://comparepv.com/panel/runergy-ss9-66hd-645m) | 645 W | -75 W, hotter, -2.4 pp | | [Runergy SS9-66HD-650M](https://comparepv.com/panel/runergy-ss9-66hd-650m) | 650 W | -70 W, hotter, -2.3 pp | | [Runergy SS9-66HS-655M](https://comparepv.com/panel/runergy-ss9-66hs-655m) | 655 W | -65 W, hotter, -2.1 pp | | [Runergy SS9-66HD-660M](https://comparepv.com/panel/runergy-ss9-66hd-660m) | 660 W | -60 W, hotter, -1.9 pp | | [Runergy SS9-66HD-665M](https://comparepv.com/panel/runergy-ss9-66hd-665m) | 665 W | -55 W, hotter, -1.8 pp | | [Runergy SS9-66HS-670M](https://comparepv.com/panel/runergy-ss9-66hs-670m) | 670 W | Hotter, lighter, -1.6 pp | | [AIKO AIKO-A805-GRH78Dw](https://comparepv.com/panel/aiko-aiko-a805-grh78dw) | 805 W | +85 W, heavier, +1.9 pp | | [AIKO AIKO-A800-GRH78Dw](https://comparepv.com/panel/aiko-aiko-a800-grh78dw) | 800 W | +80 W, heavier, +1.7 pp | | [AIKO AIKO-A795-GRH78Dw](https://comparepv.com/panel/aiko-aiko-a795-grh78dw) | 795 W | +75 W, heavier, +1.6 pp | --- Source: https://comparepv.com/panel/runergy-hy-dh132h10-720 Not in this file, on the page: the I-V and temperature curves lifted from the manufacturer's datasheet, a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.