---
title: "Risen RSM132-11-605-630BNDG-605 Solar Panel: Specs & Datasheet | ComparePV"
description: "Risen RSM132-11-605-630BNDG-605 solar panel. Specs: 22.40% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient."
source: "https://comparepv.com/panel/risen-energy-co-ltd-rsm132-11-605-630bndg-605"
image: "https://comparepv.com/og/panel/risen-energy-co-ltd-rsm132-11-605-630bndg-605.png"
updated: 2026-09-11
---

# Risen RSM132-11-605-630BNDG-605

Middle of its segment, modest efficiency

1,085 panels in the segment TOPCon 600-650 W


## Identity

- **Manufacturer:** Risen
- **Model:** RSM132-11-605-630BNDG-605
- **Series:** RSM132-11-605-630BNDG
- **Rated power:** 605 W
- **Cell technology:** TOPCon
- **Bifacial:** yes


## How it compares

Compared against segment TOPCon 600-650 W (1085 panels).


| Measure | This panel | Segment median | Standing | Rank |
| --- | --- | --- | --- | --- |
| Power (Wp) | 605 W | 620 W | Weak - bottom 15% |  |
| Module efficiency | 22.40% | 22.80% | Weak - bottom 23% | 4,834 |
| Power density | 224.0 | 227.7 | Weak - bottom 23% | 4,841 |
| Temperature coefficient | -0.290 | -0.290 | Typical | 2,220 |
| Weight (kg) | 32.5 kg | 32.8 kg | Typical |  |
| Performance warranty | 30 yrs | 30 yrs | Typical | 21 |


### Full peer table


| Measure | This panel | Segment median | Standing | Rank |
| --- | --- | --- | --- | --- |
| Module efficiency | 22.40% | 22.80% | Weak - bottom 23% | 4,834 |
| Power density | 224.0 | 227.7 | Weak - bottom 23% | 4,841 |
| Temperature coefficient | -0.290 | -0.290 | Typical | 2,220 |
| Weight per kWp | 53.7 | 53.1 | Typical | 7,813 |
| Performance warranty | 30 yrs | 30 yrs | Typical | 21 |


### Watch out for

- **22.40% module efficiency** - Bottom 23% of the TOPCon 600-650 W segment, against a median of 22.80%.
- **224.0 watts per square metre** - Bottom 23% of the TOPCon 600-650 W segment, against a median of 227.7.

- **Best for:** Commercial, utility-scale and shaded-installations.
- **Not ideal for:** Tight roof space and roofs where every square metre has to count.


## Specification


### Electrical

- **Rated power (Pmax):** 605 W
- **Efficiency:** 22.40 %
- **Voltage at Pmax (Vmp):** 40.28 V
- **Current at Pmax (Imp):** 15.02 A
- **Open-circuit voltage (Voc):** 48.49 V
- **Short-circuit current (Isc):** 15.86 A
- **Max system voltage:** 1500 V


### Temperature

- **Temperature coefficient of Pmax:** -0.290 %/degC
- **Temperature coefficient of Voc:** -0.250 %/degC
- **Temperature coefficient of Isc:** 0.046 %/degC
- **NOCT:** 44 degC


### Cell and construction

- **Cell type:** Monocrystalline
- **Cell technology:** TOPCon
- **Cell count:** 132
- **Bifacial:** yes
- **Bifacial gain:** 10.00


### Physical

- **Length:** 2382 mm
- **Width:** 1134 mm
- **Thickness:** 30 mm
- **Weight:** 32.5 kg
- **Area:** 2.70 m2
- **Power density:** 224.0 Wp/m2


### Warranty and degradation

- **Product warranty:** 15 years
- **Performance warranty:** 30 years
- **Output guaranteed at end of warranty:** 87.4 %
- **First-year degradation:** 1.00 %
- **Annual degradation:** 0.40 %
- **Output after 30 years:** 529 W


## Rank in the whole catalogue


| Measure | Position |
| --- | --- |
| Efficiency | 4834 of 14129 |
| Power density | 4841 of 14129 |
| Temperature coefficient | 2220 of 14129 |
| Weight | 7813 of 14129 |
| Warranty | 21 of 14129 |


## Pros

- **N-type i-TOPCon cells** - N-type TOPCon technology reduces typical degradation mechanisms (LID, PID) and delivers better high-temperature performance than older PERC cells, resulting in more stable energy yield over the module's lifetime.
- **Competitive 22.4-23.3% efficiency** - Peak efficiency of 23.3% matches the best TOPCon modules in the segment, including Canadian Solar TOPBiHiKu6 (23.3%), Resun RS8H-M-BD (23.32%), and Jinko Tiger Neo 66HL4M-BDV (23.32%), putting the series on par with market leaders.
- **Bifacial dual-glass construction** - The dual-glass format combined with bifacial technology captures light reflected from the ground, boosting yield on bright roofs, membranes, and concrete surfaces without increasing installed area, while also improving resistance to environmental stress.
- **30-year linear power warranty** - The manufacturer's stated 30-year power warranty exceeds the standard 25-year period common among competitors, increasing long-term energy production predictability for investors.
- **Tier-1 bankable manufacturer since 1986** - Risen is a Tier-1 bankable manufacturer operating since 1986, which simplifies project financing and lowers investor risk for PV farms and commercial installations.


## Cons

- **Shorter product warranty (15 years)** - The 15-year product warranty is shorter than the standard already adopted by some leading Tier-1 manufacturers, who now offer 20-25 year product warranties on new TOPCon series alongside the same 30-year power warranty.


## About this series

The Risen RSM132-11-605-630BNDG series are modern modules based on **n-type i-TOPCon cells**, designed for maximum energy production in real-world conditions. The application of **bifacial construction** allows for the use of reflected light, performing exceptionally well on bright roofs, membranes, concrete surfaces, and ground-mounted installations - where additional yield matters without increasing the occupied area.

Compared to many standard modules, they stand out due to their **dual-glass format**, which enhances resistance to environmental factors and supports stable parameters over a long period. The n-type technology minimizes typical degradation mechanisms, and the declared **anti-LID and anti-PID resistance** helps maintain performance in challenging installations, such as those with higher system voltages or demanding humidity conditions.

This is an excellent choice for utility-scale PV farms, industrial and commercial applications, and projects where the priority is **high kWh yield and predictable operation** year after year.


## Notable figures

- At 22.4% efficiency, this panel is on par with typical \*\*TOPCon 600-650W\*\* modules
- Power density of 224.0 W/m² is 3.7 W/m² below \*\*TOPCon 600-650W\*\* median (227.7 W/m²) - needs more roof space
- Temperature coefficient of -0.29%/°C matches the \*\*TOPCon 600-650W\*\* median
- 80% bifaciality enables rear-side power generation, boosting yield by 4-12% on reflective surfaces
- In the top 34% for efficiency among all TOPCon panels


## Questions


### What warranty does the Risen RSM132-11-605-630BNDG series come with?

The RSM132-11-605-630BNDG series includes a 15-year product warranty covering material and workmanship defects, plus a 30-year linear power warranty. After 30 years, Risen guarantees at least 87.4% of rated output power, with an annual degradation rate of just 0.4%. This is among the best figures in its class and plays a key role in the long-term financial modeling of commercial and utility-scale PV projects.


### What is n-type TOPCon technology in the Risen RSM132-11 series and how does it compare to PERC?

TOPCon (Tunnel Oxide Passivated Contact) is an n-type cell architecture featuring an ultra-thin tunneling oxide layer that reduces carrier recombination. Compared to standard PERC cells, it delivers higher module efficiency (up to 23.3%) and a lower annual degradation rate. The RSM132-11 series also carries anti-LID and anti-PID ratings, ensuring stable output throughout the full 30-year operational lifetime.


### In which installation types does the bifacial design of the Risen RSM132-11-605-630BNDG perform best?

The bifacial design lets the module harvest reflected irradiance through its rear glass surface. The highest bifacial gain is achieved over high-albedo surfaces such as white TPO membranes, concrete, gravel, or light-colored grass in ground-mount systems, typically adding 5-15% to annual energy yield. Dense rooftop arrays with limited clearance below the modules will see a smaller rear-side contribution.


### Is the Risen RSM132-11-630BNDG (630 Wp) suitable for flat commercial rooftop installations?

Yes, commercial and industrial rooftop applications are among the primary use cases for this series. The dual-glass format, 1961×1134×30 mm footprint, and approximately 27 kg weight are well-matched to commercial racking systems. A flat concrete or membrane roof maximizes bifacial gain, and the IP68-rated junction box ensures reliable performance under demanding moisture and temperature conditions.


### Are Risen RSM132-11-605-630BNDG modules compatible with popular string inverters such as Huawei or SMA?

Yes. The RSM132-11 series operates within voltage ranges compatible with most commercial string inverters, including Huawei SUN2000 and SMA Sunny Tripower. The 630 Wp variant has an open-circuit voltage (Voc) of approximately 45.5 V and supports a maximum system voltage of 1500 V DC (IEC). Always verify the inverter's MPPT input range and maximum string length against the module's datasheet before finalizing the system design.


### Is the Risen RSM132-11-605-630BNDG series still in production and available on the market?

Yes, this series is currently active and has not been discontinued by Risen Energy. As a Bloomberg NEF Tier 1 manufacturer, Risen maintains broad distribution through wholesale PV distributors. Availability of specific wattage variants (605-630 Wp) may vary by region and season, so it is recommended to contact your local distributor for current stock levels and lead times.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/1253119104693ab3e754645-9bd766358a11.pdf)


## Alternatives


| Panel | Power | How it differs |
| --- | --- | --- |
| [AIKO AIKO-A650-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a650-mae72mw) | 650 W | +45 W, lighter, +2.8 pp |
| [AIKO AIKO-A645-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a645-mae72mw) | 645 W | +40 W, lighter, +2.6 pp |
| [Longi Solar LR7-60HVH-560M](https://comparepv.com/panel/longi-lr7-60hvh-560m) | 560 W | -45 W, lighter, +2.4 pp |
| [AIKO AIKO-A640-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a640-mae72mw) | 640 W | +35 W, lighter, +2.4 pp |
| [Longi Solar LR7-60HVH-555M](https://comparepv.com/panel/longi-lr7-60hvh-555m) | 555 W | -50 W, lighter, +2.2 pp |
| [AIKO AIKO-A635-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a635-mae72mw) | 635 W | +30 W, lighter, +2.2 pp |
| [Risen RSM132-11-605-630BNDG-610](https://comparepv.com/panel/risen-energy-co-ltd-rsm132-11-605-630bndg-610) | 610 W | +0.2 pp |
| [Risen RSM132-11-605-630BNDG-615](https://comparepv.com/panel/risen-energy-co-ltd-rsm132-11-605-630bndg-615) | 615 W | +10 W, +0.4 pp |
| [Risen RSM132-11-605-630BNDG-620](https://comparepv.com/panel/risen-energy-co-ltd-rsm132-11-605-630bndg-620) | 620 W | +15 W, +0.6 pp |
| [Risen RSM132-11-605-630BNDG-625](https://comparepv.com/panel/risen-energy-co-ltd-rsm132-11-605-630bndg-625) | 625 W | +20 W, +0.7 pp |
| [Risen RSM132-11-605-630BNDG-630](https://comparepv.com/panel/risen-energy-co-ltd-rsm132-11-605-630bndg-630) | 630 W | +25 W, +0.9 pp |
| [AIKO AIKO-A680-MDE72Mw](https://comparepv.com/panel/aiko-aiko-a680-mde72mw) | 680 W | +75 W, lighter, +2.8 pp |
| [AIKO AIKO-A675-MDE72Mw](https://comparepv.com/panel/aiko-aiko-a675-mde72mw) | 675 W | +70 W, lighter, +2.6 pp |
| [AIKO AIKO-A700-MAE78Dw](https://comparepv.com/panel/aiko-aiko-a700-mae78dw) | 700 W | +95 W, cooler, +2.6 pp |
| [WINAICO WST-675BKX72-A2](https://comparepv.com/panel/winaico-wst-675bkx72-a2) | 675 W | +70 W, cooler, +2.6 pp |
| [AIKO AIKO-A695-MAE78Dw](https://comparepv.com/panel/aiko-aiko-a695-mae78dw) | 695 W | +90 W, cooler, +2.5 pp |


---

Source: https://comparepv.com/panel/risen-energy-co-ltd-rsm132-11-605-630bndg-605

Not in this file, on the page: the I-V and temperature curves lifted from the manufacturer's datasheet, a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.

