--- title: "Resun Solar RS8V-M-415W 415W Solar Panel - Specs & Review | ComparePV" description: "Resun Solar RS8V-M-415W 415W solar panel. Specs: 21.25% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/resun-solar-rs8v-m-415w" updated: 2026-09-11 --- # Resun Solar RS8V-M-415W Middle of its segment, weak in heat 6,879 panels in the 315-515 W band, all technologies ## Identity - **Manufacturer:** Resun Solar - **Model:** RS8V-M-415W - **Series:** RS8V-M - **Rated power:** 415 W - **Cell technology:** Monocrystalline ## How it compares Compared against 315-515 W band, all technologies (6879 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 415 W | 440 W | Typical | | | Module efficiency | 21.25% | 21.48% | Typical | 8,904 | | Power density | 212.5 | 214.7 | Typical | 8,791 | | Temperature coefficient | -0.350 | -0.300 | Weak - bottom 22% | 10,419 | | Weight (kg) | 22.0 kg | 23.0 kg | Typical | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 21.25% | 21.48% | Typical | 8,904 | | Power density | 212.5 | 214.7 | Typical | 8,791 | | Temperature coefficient | -0.350 | -0.300 | Weak - bottom 22% | 10,419 | | Weight per kWp | 53.0 | 53.1 | Typical | 6,767 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Watch out for - **-0.350 %/°C temperature coefficient** - Bottom 22% of the 315-515 W band, against a median of -0.300. - **Best for:** Residential, commercial and shaded-installations. - **Not ideal for:** Hot climates. ## Specification ### Electrical - **Rated power (Pmax):** 415 W - **Efficiency:** 21.25 % - **Voltage at Pmax (Vmp):** 31.61 V - **Current at Pmax (Imp):** 13.13 A - **Open-circuit voltage (Voc):** 37.45 V - **Short-circuit current (Isc):** 14.02 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.350 %/degC - **Temperature coefficient of Voc:** -0.320 %/degC - **Temperature coefficient of Isc:** 0.050 %/degC - **NOCT:** 45 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell count:** 108 ### Physical - **Length:** 1722 mm - **Width:** 1134 mm - **Thickness:** 35 mm - **Weight:** 22.0 kg - **Area:** 1.95 m2 - **Power density:** 212.5 Wp/m2 ### Warranty and degradation - **Product warranty:** 12 years - **Performance warranty:** 30 years - **Annual degradation:** 0.50 % - **Output after 30 years:** 351 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 8904 of 14005 | | Power density | 8791 of 14005 | | Temperature coefficient | 10419 of 14005 | | Weight | 6767 of 14005 | | Warranty | 21 of 14005 | ## About this series The RS8V-M series from Resun Solar consists of monocrystalline panels built with **half-cut cell technology**, splitting each cell in half to reduce internal power loss and boost the module's overall energy conversion efficiency. The use of **multi-busbar** cells lowers internal resistance and improves current collection across the cell surface, resulting in more stable energy output even under suboptimal lighting conditions. The split-cell design significantly increases **resistance to hot-spot effects** caused by partial shading, a key advantage for installations exposed to shadows from chimneys, trees, or neighboring buildings. These panels also carry a reduced risk of microcracks and busbar damage, translating into higher **long-term reliability** and slower power degradation over the module's lifespan. A robust build featuring 3.2mm tempered glass and an IP68-rated junction box makes the RS8V-M series well suited for both residential rooftops and commercial installations, where predictable performance and low failure rates matter most. It's a solid choice for investors seeking proven monocrystalline technology at a reasonable price point, without compromising on build quality or IEC-certified standards and confirmed PID-free performance. ## Notable figures - At 21.2% efficiency, this panel is 0.6pp below the \*\*database\*\* median of 21.8% - 212.5 W/m² power density is 5.6 W/m² below \*\*database\*\* median (218.1 W/m²) - requires larger installation area - -0.35%/°C temperature coefficient - 0.05pp worse than \*\*database\*\* median (-0.30%/°C), expect higher hot weather losses - 22.0 kg weight - 4.5 kg lighter than \*\*database\*\* median (26.5 kg), reducing installation effort - #8904 for efficiency, #10419 for temperature performance out of 14005 panels ## Questions ### What warranty comes with Resun Solar RS8V-M panels? The RS8V-M series comes with a 12-year product warranty covering material and workmanship defects, plus a 30-year linear power output warranty. This means the manufacturer guarantees a defined performance level even after three decades of use, which is an important factor when calculating the return on investment of a solar installation. ### What is half-cut cell technology in the RS8V-M panels and is it worth it? Half-cut technology splits standard silicon cells in half, reducing current losses and internal resistance in the module. This gives the RS8V-M panel higher energy efficiency and better performance under partial shading, such as from chimneys or antennas. It's a proven approach now used in most modern monocrystalline panels and worth choosing for any installation. ### Are RS8V-M panels resistant to the hot-spot effect under shading? Yes, thanks to the split-cell design and multi-busbar structure, RS8V-M panels show increased resistance to the hot-spot effect that occurs under partial shading. This matters for installations exposed to shadows from trees, chimneys, or neighboring buildings, where the risk of localized cell overheating is higher. ### What is the maximum power output of the RS8V-M series panels? RS8V-M series panels reach a maximum power output of up to 415 Wp. That's a solid figure for a monocrystalline module in this price segment, allowing efficient use of available roof space in both residential and commercial installations. ### Are RS8V-M panels resistant to PID degradation? Yes, the RS8V-M series has confirmed resistance to PID, or potential-induced degradation, which can reduce panel power output due to current leakage to the frame or substrate. The panels have passed IEC-compliant testing, ensuring stable energy production throughout the system's operating life. ### Are Resun Solar RS8V-M panels suitable for both residential and commercial installations? Yes, thanks to their robust construction with 3.2 mm tempered glass and an IP68-rated enclosure, RS8V-M panels work well on both single-family home roofs and larger commercial installations. Their predictable performance and low failure rate make them a versatile choice for different types of solar projects. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/RS8V-M-400-415W-min-fcfe189ff457.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [Just Solar JST-EDMH-(445-465)W-TD (465W class)](https://comparepv.com/panel/just-solar-jst-edmh-445-465-w-td-465w-class) | 465 W | +50 W, cooler, +2.6 pp | | [Luxor Solar LX-465M/182R-96+ GG](https://comparepv.com/panel/luxor-lx-465m-182r-96-gg) | 465 W | +50 W, cooler, +2.6 pp | | [AIKO AIKO-A460-MAH54Mb](https://comparepv.com/panel/aiko-shenzhen-aiko-digital-energy-technology-co-ltd-aiko-a460-mah54mb-1) | 460 W | +45 W, cooler, +2.4 pp | | [Luxor Solar LX-465M/182R188-108+ GG](https://comparepv.com/panel/luxor-solar-lx-465m-182r188-108-gg) | 465 W | +50 W, cooler, +2.4 pp | | [Just Solar JST-EDMH-(445-465)W-TD (460W class)](https://comparepv.com/panel/just-solar-jst-edmh-445-465-w-td-460w-class) | 460 W | +45 W, cooler, +2.3 pp | | [Luxor Solar LX-460M/182R-96+ GG](https://comparepv.com/panel/luxor-lx-460m-182r-96-gg) | 460 W | +45 W, cooler, +2.3 pp | | [Philadelphia Solar PS-MNB108(HCBF)-460W](https://comparepv.com/panel/philadelphia-solar-ps-mnb108-hcbf-460w) | 460 W | +45 W, cooler, +2.3 pp | | [JA Solar JAT54S40-460/LR](https://comparepv.com/panel/ja-solar-jat54s40-460-lr) | 460 W | +45 W, cooler, +2.2 pp | | [Resun Solar RS8V-M-400](https://comparepv.com/panel/resun-solar-rs8v-m-400) | 400 W | -15 W, -0.8 pp | | [Resun Solar RS8V-M-405](https://comparepv.com/panel/resun-solar-rs8v-m-405) | 405 W | -10 W, -0.5 pp | | [Resun Solar RS8V-M-410W](https://comparepv.com/panel/resun-solar-rs8v-m-410w) | 410 W | -0.2 pp | | [Longi Solar LR7-54HJD-510M](https://comparepv.com/panel/longi-lr7-54hjd-510m) | 510 W | +95 W, cooler, +3.8 pp | | [AIKO AIKO-A495-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a495-mce54mw) | 495 W | +80 W, cooler, +3.6 pp | | [Longi Solar LR7-54HJD-505M](https://comparepv.com/panel/longi-lr7-54hjd-505m) | 505 W | +90 W, cooler, +3.4 pp | | [AIKO AIKO-A490-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a490-mce54mw) | 490 W | +75 W, cooler, +3.2 pp | | [Longi Solar LR7-54HJD-500M](https://comparepv.com/panel/longi-lr7-54hjd-500m) | 500 W | +85 W, cooler, +3.2 pp | --- Source: https://comparepv.com/panel/resun-solar-rs8v-m-415w Not in this file, on the page: a thirty-year output simulator and alternatives filtered by how closely they match these dimensions.