--- title: "Renew Photovoltaics RPS2MH72BD575 575W Solar Panel - Specs & Review | ComparePV" description: "Renew Photovoltaics RPS2MH72BD575 575W solar panel. Specs: 22.26% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/renew-photovoltaics-rps2mh72bd575" updated: 2026-09-11 --- # Renew Photovoltaics RPS2MH72BD575 Middle of its segment, heavy for its output 1,018 panels in the segment TOPCon 550-600 W ## Identity - **Manufacturer:** Renew Photovoltaics - **Model:** RPS2MH72BD575 - **Series:** M10 Cells TOPCon Module - **Rated power:** 575 W - **Cell technology:** TOPCon - **Bifacial:** yes ## How it compares Compared against segment TOPCon 550-600 W (1018 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 575 W | 580 W | Typical | | | Module efficiency | 22.26% | 22.44% | Typical | 5,593 | | Power density | 222.6 | 224.4 | Typical | 5,549 | | Temperature coefficient | -0.300 | -0.290 | Typical | 6,093 | | Weight (kg) | 32.5 kg | 31.2 kg | Weak - bottom 15% | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 22.26% | 22.44% | Typical | 5,593 | | Power density | 222.6 | 224.4 | Typical | 5,549 | | Temperature coefficient | -0.300 | -0.290 | Typical | 6,093 | | Weight per kWp | 56.5 | 53.8 | Weak - bottom 15% | 10,695 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Watch out for - **56.5 kg per kWp** - Bottom 15% of the TOPCon 550-600 W segment, against a median of 53.8. - **Best for:** Utility-scale and commercial. - **Not ideal for:** Weight-limited structures. ## Specification ### Electrical - **Rated power (Pmax):** 575 W - **Efficiency:** 22.26 % - **Voltage at Pmax (Vmp):** 44.61 V - **Current at Pmax (Imp):** 12.89 A - **Open-circuit voltage (Voc):** 52.90 V - **Short-circuit current (Isc):** 13.58 A ### Temperature - **Temperature coefficient of Pmax:** -0.300 %/degC - **Temperature coefficient of Voc:** -0.240 %/degC - **Temperature coefficient of Isc:** 0.040 %/degC - **NOCT:** 45 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** TOPCon - **Cell count:** 144 - **Bifacial:** yes ### Physical - **Length:** 2278 mm - **Width:** 1134 mm - **Thickness:** 30 mm - **Weight:** 32.5 kg - **Area:** 2.58 m2 - **Power density:** 222.6 Wp/m2 ### Warranty and degradation - **Product warranty:** 12 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 87.4 % - **First-year degradation:** 1.00 % - **Annual degradation:** 0.40 % - **Output after 30 years:** 503 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 5593 of 14005 | | Power density | 5549 of 14005 | | Temperature coefficient | 6093 of 14005 | | Weight | 10695 of 14005 | | Warranty | 21 of 14005 | ## Pros - **Bifacial N-type TOPCon cells** - N-type TOPCon technology delivers a lower LID degradation rate (around 1% in the first year) and better high-temperature performance than legacy PERC cells, translating into higher real-world annual yield in hot climates. - **Bifaciality factor up to 80%** - The module captures reflected ground-albedo light thanks to a bifaciality factor of up to 80%, boosting energy production without increasing the installed footprint — a key advantage for commercial and industrial projects with limited roof or land area. - **30-year linear power warranty** - The 30-year power warranty aligns with the current premium standard for tier-1 TOPCon modules in the 2026 market, giving investors predictable, long-term energy yield backed by quality certifications. - **High mechanical load resistance** - The module is tested for wind loads up to 2400 Pa and snow loads up to 5400 Pa, making it a strong choice for installations in regions with extreme weather conditions, including areas with heavy snowfall. - **Half-cut design with 16 busbars** - M10 half-cut cells combined with 16 busbars limit the impact of micro-cracks on performance and improve stability under partial shading, reducing the risk of localized power loss in real-world operating conditions. ## Cons - **Product warranty trails premium trend** - The 12-year product warranty is now the baseline for the TOPCon segment — some tier-1 competitors (e.g., Risen Energy) already offer 15-year product warranties alongside the same 30-year power warranty, which may make ReNew's offering less competitive for buyers seeking maximum coverage. ## About this series The M10 Cells TOPCon Module series from ReNew consists of bifacial N-type panels engineered for installations that demand both high output and resilience under demanding operating conditions. The panel uses **M10 half-cut cells** and **16 busbars**, which reduces the impact of micro-cracks on performance and enables stable operation even under partial shading. Smart soldering combined with zero LID technology results in a low first-year power drop, while the module's construction has been tested for **resistance to wind and snow loads**, making it a solid choice for installations exposed to extreme weather. Thanks to a **bifaciality factor of up to 80%**, the panel also captures light reflected off the ground, boosting energy yield without increasing the installation footprint. A low temperature coefficient and strong performance under weak light conditions keep output stable both in hot climates and on overcast days. The series is aimed at commercial and industrial investors who expect durability, predictable yield, and a **30-year power warranty** backed by quality certifications and Tier 1 status. ## Notable figures - Efficiency of 22.3% matches the \*\*TOPCon 550-600W\*\* median - At 222.6 W/m² power density, roof space requirements are typical for \*\*TOPCon 550-600W\*\* panels - At -0.30%/°C, hot weather performance is typical for \*\*TOPCon 550-600W\*\* panels - At 32.5 kg, this panel is 1.3 kg heavier than the \*\*TOPCon 550-600W\*\* median (31.2 kg) - more demanding for installation crews - Bifaciality factor of 80% can add 4-12% extra yield with reflective mounting surface ## Questions ### What is the maximum power output of the ReNew M10 Cells TOPCon Module? The module reaches a maximum power output of up to 590 Wp. This is achieved through N-type TOPCon cells combined with half-cut cell technology and 16 busbars, which reduce power losses from microcracks and partial shading. Higher unit power means fewer modules are needed for the same output, which matters for commercial and industrial installations with limited roof or ground space. ### How does TOPCon cell technology differ from standard PERC cells? The N-type TOPCon cells used in the M10 series show lower power degradation over time and better high-temperature performance than conventional P-type PERC cells. An additional passivation layer in the TOPCon structure reduces charge carrier recombination, resulting in higher module efficiency and more stable energy yield throughout the module's lifetime, especially in hot climates. ### What does the bifacial design of the M10 modules offer, and is it worth the extra cost? The double-sided construction, with a bifaciality factor of up to 80%, allows the module to capture light reflected from the surface below, such as a light-colored roof, gravel, or snow, generating additional energy without increasing the installation's footprint. Actual gains depend on ground albedo and mounting method, but with proper racking, bifacial gain can meaningfully boost annual energy yield by several percentage points. ### What warranty applies to the M10 Cells TOPCon Module series? ReNew Photovoltaics provides a 12-year product warranty and a 30-year linear power warranty. This means the module is guaranteed to retain a specified percentage of its initial power output after 30 years of operation, backed by quality certifications and Tier 1 manufacturer status, ensuring predictable long-term returns for commercial and industrial projects. ### Are M10 modules suitable for installations exposed to heavy wind and snow loads? Yes, the module's design has been tested for resistance to wind and snow loads, making it a suitable choice for commercial and industrial sites in regions with harsh weather conditions. Combined with zero LID technology and low first-year power degradation, the panel maintains stable performance even under fluctuating mechanical stress. ### Do M10 panels lose efficiency in hot weather or low-light conditions? Not significantly. The low temperature coefficient of the TOPCon cells limits power loss in high ambient temperatures, while good low-irradiance performance allows the module to keep generating energy on cloudy days. As a result, installations using this module maintain a more stable and predictable energy yield across varying climate conditions throughout the year. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/RP_SS_M10TC_144_R_003-f291495e40b9.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [Longi Solar LR7-60HVH-560M](https://comparepv.com/panel/longi-lr7-60hvh-560m) | 560 W | Cooler, lighter, +2.5 pp | | [Longi Solar LR7-60HVH-555M](https://comparepv.com/panel/longi-lr7-60hvh-555m) | 555 W | Cooler, lighter, +2.3 pp | | [Longi Solar LR7-60HVHL-550M](https://comparepv.com/panel/longi-lr7-60hvhl-550m) | 550 W | Cooler, 16 kg lighter, +2.1 pp | | [JA Solar JAT60S40-540/LR](https://comparepv.com/panel/ja-solar-jat60s40-540-lr) | 540 W | Cooler, lighter, +2.1 pp | | [Gokin GK-5-60HG-540M](https://comparepv.com/panel/gokin-gk-5-60hg-540m) | 540 W | Cooler, lighter, +2.1 pp | | [Jinko Solar JKM545-54QL6-DV-F1-EU](https://comparepv.com/panel/jinko-solar-jkm545-54ql6-dv-f1-eu) | 545 W | Cooler, lighter, +2.0 pp | | [AIKO AIKO-A625-MAH72Dw](https://comparepv.com/panel/aiko-aiko-a625-mah72dw) | 625 W | +50 W, cooler, +1.9 pp | | [Renew Photovoltaics RPS2MH72BD530](https://comparepv.com/panel/renew-photovoltaics-rps2mh72bd530) | 530 W | -45 W, hotter, -1.7 pp | | [Renew Photovoltaics RPS2MH72BD535](https://comparepv.com/panel/renew-photovoltaics-rps2mh72bd535) | 535 W | -40 W, hotter, -1.6 pp | | [Renew Photovoltaics RPS2MH72BD540](https://comparepv.com/panel/renew-photovoltaics-rps2mh72bd540) | 540 W | -35 W, hotter, -1.4 pp | | [Renew Photovoltaics RPS2MH72BD545](https://comparepv.com/panel/renew-photovoltaics-rps2mh72bd545) | 545 W | -30 W, hotter, -1.2 pp | | [Renew Photovoltaics RPS2MH72BD550](https://comparepv.com/panel/renew-photovoltaics-rps2mh72bd550) | 550 W | -25 W, hotter, -1.0 pp | | [Renew Photovoltaics RPS2MH72BD555](https://comparepv.com/panel/renew-photovoltaics-rps2mh72bd555) | 555 W | -20 W, hotter, -0.8 pp | | [Renew Photovoltaics RPS2MH72BD560](https://comparepv.com/panel/renew-photovoltaics-rps2mh72bd560) | 560 W | -15 W, hotter, -0.6 pp | | [Renew Photovoltaics RPS2MH72BD570](https://comparepv.com/panel/renew-photovoltaics-rps2mh72bd570) | 570 W | Very close match | | [Renew Photovoltaics RPS2MH72BD580](https://comparepv.com/panel/renew-photovoltaics-rps2mh72bd580) | 580 W | Very close match | | [AIKO AIKO-A650-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a650-mae72mw) | 650 W | +75 W, lighter, +2.9 pp | --- Source: https://comparepv.com/panel/renew-photovoltaics-rps2mh72bd575 Not in this file, on the page: the I-V and temperature curves lifted from the manufacturer's datasheet, a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.