---
title: "PolyCrown Solar Tech ODA440-30V-MHD 440W Solar Panel - Specs & Review | ComparePV"
description: "PolyCrown Solar Tech ODA440-30V-MHD 440W solar panel. Specs: 20.38% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient."
source: "https://comparepv.com/panel/polycrown-solar-tech-oda440-30v-mhd"
updated: 2026-09-11
---

# PolyCrown Solar Tech ODA440-30V-MHD

Middle of its segment, heavy for its output

7,136 panels in the 340-540 W band, all technologies


## Identity

- **Manufacturer:** PolyCrown Solar Tech
- **Model:** ODA440-30V-MHD
- **Series:** ODA-120MHD
- **Rated power:** 440 W
- **Cell technology:** Monocrystalline
- **Bifacial:** yes


## How it compares

Compared against 340-540 W band, all technologies (7136 panels).


| Measure | This panel | Segment median | Standing | Rank |
| --- | --- | --- | --- | --- |
| Power (Wp) | 440 W | 445 W | Typical |  |
| Module efficiency | 20.38% | 21.50% | Weak - bottom 20% | 11,697 |
| Power density | 203.9 | 215.1 | Weak - bottom 20% | 11,625 |
| Temperature coefficient | -0.350 | -0.300 | Weak - bottom 20% | 10,419 |
| Weight (kg) | 27.2 kg | 23.5 kg | Weak - bottom 8% |  |
| Performance warranty | 30 yrs | 30 yrs | Typical | 21 |


### Full peer table


| Measure | This panel | Segment median | Standing | Rank |
| --- | --- | --- | --- | --- |
| Module efficiency | 20.38% | 21.50% | Weak - bottom 20% | 11,697 |
| Power density | 203.9 | 215.1 | Weak - bottom 20% | 11,625 |
| Temperature coefficient | -0.350 | -0.300 | Weak - bottom 20% | 10,419 |
| Weight per kWp | 61.8 | 52.7 | Weak - bottom 8% | 12,697 |
| Performance warranty | 30 yrs | 30 yrs | Typical | 21 |


### Watch out for

- **61.8 kg per kWp** - Bottom 8% of the 340-540 W band, against a median of 52.7. Ranked 12,697th in the whole database.
- **20.38% module efficiency** - Bottom 20% of the 340-540 W band, against a median of 21.50%.
- **-0.350 %/°C temperature coefficient** - Bottom 20% of the 340-540 W band, against a median of -0.300.

- **Best for:** Residential, commercial, shaded-installations and hot-climate.
- **Not ideal for:** Weight-limited structures, tight roof space and hot climates.


## Specification


### Electrical

- **Rated power (Pmax):** 440 W
- **Efficiency:** 20.38 %
- **Voltage at Pmax (Vmp):** 34.47 V
- **Current at Pmax (Imp):** 12.77 A
- **Open-circuit voltage (Voc):** 41.00 V
- **Short-circuit current (Isc):** 13.78 A
- **Max system voltage:** 1500 V


### Temperature

- **Temperature coefficient of Pmax:** -0.350 %/degC
- **Temperature coefficient of Voc:** -0.285 %/degC
- **Temperature coefficient of Isc:** 0.045 %/degC
- **NOCT:** 45 degC


### Cell and construction

- **Cell type:** Monocrystalline
- **Cell count:** 120
- **Bifacial:** yes


### Physical

- **Length:** 1903 mm
- **Width:** 1134 mm
- **Thickness:** 30 mm
- **Weight:** 27.2 kg
- **Area:** 2.16 m2
- **Power density:** 203.9 Wp/m2


### Warranty and degradation

- **Product warranty:** 15 years
- **Performance warranty:** 30 years
- **Output guaranteed at end of warranty:** 85.0 %
- **First-year degradation:** 2.00 %
- **Annual degradation:** 0.45 %
- **Output after 30 years:** 374 W


## Rank in the whole catalogue


| Measure | Position |
| --- | --- |
| Efficiency | 11697 of 14005 |
| Power density | 11625 of 14005 |
| Temperature coefficient | 10419 of 14005 |
| Weight | 12697 of 14005 |
| Warranty | 21 of 14005 |


## Pros

- **Bifacial N-type TOPCon cells** - N-type TOPCon cells in a glass-glass bifacial design reduce LID/LeTID degradation and improve low-light performance, which matters given Poland's high share of overcast days.
- **Half-cut cell structure** - Splitting cells into halves lowers resistive losses and hot-spot risk, translating into higher long-term module reliability.
- **30-year power warranty** - The manufacturer offers a 30-year linear power warranty, exceeding the 25-year linear warranty that remains the market standard for many competing TOPCon series.
- **Mature, proven product line** - The ODA-120MHD series has been on the market since 2021 and remains in active production, indicating a mature manufacturing process and continuity of service and spare-parts availability.


## Cons

- **Efficiency trails peer series** - The maximum efficiency of 21.31% is clearly below comparable TOPCon series at the same 460 Wp power class - Phono Solar Draco (23.02%), SunKean SKT440-460M12 (23.02%) and Axitec AXIbiperfect GR WB (22.54%) - meaning more installed area is needed to reach the same system power.
- **No BNEF Tier 1 status** - PolyCrown Solar Tech does not appear on BloombergNEF's Tier 1 manufacturer list (Q2 2026), which can complicate obtaining non-recourse financing for larger commercial and utility-scale projects.
- **15-year product warranty** - The 15-year warranty against material and workmanship defects is shorter than the 25-year product warranty now offered by leading TOPCon manufacturers, despite matching their 30-year power warranty.


## About this series

PolyCrown Solar Tech ODA-120MHD panels are advanced modules based on **N-type TOPCon cell technology**, setting new efficiency standards in the Polish photovoltaic sector. Thanks to the bifacial glass-glass construction, this series excels at overcoming challenges such as potential-induced degradation and the negative impact of atmospheric factors. **Increased low-light efficiency** ensures that the system produces energy effectively even on cloudy days, which is crucial for the Polish latitude. The use of a **Half-Cut structure** minimizes internal losses and the risk of hot spots, directly translating to a longer lifespan for the entire system. This solution is primarily dedicated to investors looking to maximize profits from limited roof or ground space. What sets them apart from the competition is their exceptional **resistance to extreme mechanical loads** and a low temperature coefficient, guaranteeing stable operation on hot days. By choosing the ODA-120MHD, the user receives a product that optimizes self-consumption and shortens the return on investment time, combining innovation with solid workmanship. It is the ideal choice for modern households and demanding business installations where durability and predictability of energy yields for decades are priorities.


## Notable figures

- At 20.4% efficiency, this panel is 1.4pp below the \*\*database\*\* median of 21.8%
- Power density of 203.9 W/m² is 14.2 W/m² below \*\*database\*\* median (218.1 W/m²) - needs more roof space
- Temperature coefficient of -0.35%/°C is 0.05pp worse than \*\*database\*\* median (-0.30%/°C) - higher losses in summer heat
- Bifacial design (70% factor) captures reflected light - adds 4-10% yield on ground-mount or white roof
- In the top 84% for efficiency among all N-type panels


## Questions


### What warranty does the PolyCrown Solar Tech ODA-120MHD series come with?

PolyCrown Solar Tech provides a 15-year product warranty and a 30-year power output warranty for the ODA-120MHD series. The power warranty guarantees that the panels will maintain a specified minimum output over three decades, following the manufacturer's defined degradation curve. A 30-year power warranty is especially important when financing a solar installation, as it serves as a bankable basis for long-term yield projections.


### What is N-type TOPCon technology and why does the ODA-120MHD series use it?

TOPCon (Tunnel Oxide Passivated Contact) is an N-type silicon cell technology that adds a thin tunnel oxide passivation layer to minimize carrier recombination at the rear contact. Compared to PERC cells, TOPCon achieves higher conversion efficiency, a lower temperature coefficient of Pmax (typically around -0.30%/°C), and effectively zero LID/LeTID degradation risk. The ODA-120MHD series leverages these advantages for superior hot-weather performance and a longer usable lifespan over the full 30-year warranty period.


### Do the bifacial ODA-120MHD panels make sense for a standard pitched residential roof?

Bifacial panels deliver the greatest energy gain in ground-mounted systems or flat-roof installations where the rear glass captures irradiance reflected off a bright surface below. On a steep pitched roof with dark roofing, bifacial gain typically falls to just 5-10%. That said, the ODA-120MHD's dual glass construction independently provides superior moisture resistance and PID immunity, extending module lifetime compared to conventional glass-backsheet modules regardless of the bifacial contribution.


### How do ODA-120MHD panels perform in low-light conditions and overcast weather?

The N-type TOPCon cells in the ODA-120MHD series offer a broader spectral response and a higher short-circuit current under diffuse irradiance compared to standard PERC modules. This translates to efficient energy generation even on the cloudy autumn and winter days common across Poland. The half-cut cell architecture further reduces partial shading losses and lowers internal series resistance, improving low-light output across the entire array.


### How many 460 Wp ODA-120MHD panels are needed to build a 10 kWp system?

At a peak power of 460 Wp, approximately 22 ODA-120MHD panels are required to reach 10 kWp. That is 2-3 fewer panels than with common 400-420 Wp modules, which means less roof area consumed or lower racking and labor costs for an equivalent system output — a significant advantage when available roof space is limited.


### Can ODA-120MHD panels handle heavy snow loads and hard frost in the Polish climate?

The ODA-120MHD series is engineered for exceptional mechanical load resistance, and its dual glass construction meets or exceeds IEC snow load certification thresholds. The glass-glass laminate eliminates moisture ingress and backsheet delamination risks in sub-zero temperatures. Additionally, the low temperature coefficient of N-type TOPCon cells means output remains stable — or even improves relative to STC — on cold, clear winter days when irradiance levels are high.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/ccd2c2e5e5f2fd0c40a1d79ec5c56867-2c07d08413e6.pdf)


## Alternatives


| Panel | Power | How it differs |
| --- | --- | --- |
| [AIKO AIKO-A490-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a490-mce54mw) | 490 W | Cooler, lighter, +4.1 pp |
| [Suntech STP-NT11/48QGSF-490](https://comparepv.com/panel/suntech-stp-nt11-48qgsf-490) | 490 W | Cooler, lighter, +4.1 pp |
| [JA Solar JAT54S40-485/LR](https://comparepv.com/panel/ja-solar-jat54s40-485-lr) | 485 W | Cooler, lighter, +3.9 pp |
| [AIKO AIKO-A485-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a485-mce54mw) | 485 W | Cooler, lighter, +3.9 pp |
| [AIKO AIKO-A485-MAH54Mw](https://comparepv.com/panel/aiko-aiko-a485-mah54mw) | 485 W | Cooler, lighter, +3.9 pp |
| [Gokin GK-5-54HG-485M](https://comparepv.com/panel/gokin-gk-5-54hg-485m) | 485 W | Cooler, lighter, +3.9 pp |
| [Heckert Solar ZEUS 3.0+ 108 485WP](https://comparepv.com/panel/heckert-solar-zeus-3-0-108-485wp) | 485 W | +45 W, cooler, +3.9 pp |
| [PolyCrown Solar Tech ODA445-30V-MHD](https://comparepv.com/panel/polycrown-solar-tech-oda445-30v-mhd) | 445 W | +0.2 pp |
| [PolyCrown Solar Tech ODA450-30V-MHD](https://comparepv.com/panel/polycrown-solar-tech-oda450-30v-mhd) | 450 W | +10 W, +0.5 pp |
| [PolyCrown Solar Tech NS-450MH-120](https://comparepv.com/panel/polycrown-solar-tech-ns-450mh-120) | 450 W | Cooler, lighter, -5 yr warranty |
| [PolyCrown Solar Tech ODA455-30V-MHD](https://comparepv.com/panel/polycrown-solar-tech-oda455-30v-mhd) | 455 W | +15 W, +0.7 pp |
| [PolyCrown Solar Tech ODA460-30V-MHD](https://comparepv.com/panel/polycrown-solar-tech-oda460-30v-mhd) | 460 W | +20 W, +0.9 pp |
| [PolyCrown Solar Tech NS-460MH-120](https://comparepv.com/panel/polycrown-solar-tech-ns-460mh-120) | 460 W | Cooler, lighter, -5 yr warranty |
| [PolyCrown Solar Tech NS-470MH-120](https://comparepv.com/panel/polycrown-solar-tech-ns-470mh-120) | 470 W | Cooler, lighter, +1.4 pp |
| [PolyCrown Solar Tech NS-480MH-120](https://comparepv.com/panel/polycrown-solar-tech-ns-480mh-120) | 480 W | Cooler, lighter, +1.8 pp |
| [PolyCrown Solar Tech NS-485MH-120](https://comparepv.com/panel/polycrown-solar-tech-ns-485mh-120) | 485 W | Cooler, lighter, +2.0 pp |
| [Longi Solar LR7-60HVH-560M](https://comparepv.com/panel/longi-lr7-60hvh-560m) | 560 W | +120 W, cooler, +4.4 pp |


---

Source: https://comparepv.com/panel/polycrown-solar-tech-oda440-30v-mhd

Not in this file, on the page: a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.

