--- title: "Philadelphia Solar PS-MNB132(HCBF)-530W Solar Panel: Specs & Datasheet | ComparePV" description: "Philadelphia Solar PS-MNB132(HCBF)-530W solar panel. Specs: 22.27% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/philadelphia-solar-ps-mnb132-hcbf-530w" image: "https://comparepv.com/og/panel/philadelphia-solar-ps-mnb132-hcbf-530w.png" updated: 2026-09-12 --- # Philadelphia Solar PS-MNB132(HCBF)-530W Middle of its segment, weak in heat 142 panels in the segment N-type 500-550 W ## Identity - **Manufacturer:** Philadelphia Solar - **Model:** PS-MNB132(HCBF)-530W - **Series:** NEXUS PS-MNB132(HCBF) - **Rated power:** 530 W - **Cell technology:** N-type - **Bifacial:** yes ## How it compares Compared against segment N-type 500-550 W (142 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 530 W | 520 W | Typical | | | Module efficiency | 22.27% | 22.55% | Typical | 5,544 | | Power density | 222.7 | 225.3 | Typical | 5,562 | | Temperature coefficient | -0.300 | -0.290 | Weak - bottom 11% | 6,152 | | Weight (kg) | 26.0 kg | 26.2 kg | Typical | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 22.27% | 22.55% | Typical | 5,544 | | Power density | 222.7 | 225.3 | Typical | 5,562 | | Temperature coefficient | -0.300 | -0.290 | Weak - bottom 11% | 6,152 | | Weight per kWp | 49.1 | 50.0 | Typical | 2,704 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Watch out for - **-0.300 %/°C temperature coefficient** - Bottom 11% of the N-type 500-550 W segment, against a median of -0.290. - **Best for:** Commercial, utility-scale, shaded-installations and off-grid. - **Not ideal for:** Hot climates. ## Specification ### Electrical - **Rated power (Pmax):** 530 W - **Efficiency:** 22.27 % - **Voltage at Pmax (Vmp):** 39.64 V - **Current at Pmax (Imp):** 13.40 A - **Open-circuit voltage (Voc):** 46.63 V - **Short-circuit current (Isc):** 14.30 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.300 %/degC - **Temperature coefficient of Voc:** -0.250 %/degC - **Temperature coefficient of Isc:** 0.046 %/degC - **NOCT:** 45 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** N-type - **Cell count:** 132 - **Bifacial:** yes - **Bifacial gain:** 25.00 ### Physical - **Length:** 2099 mm - **Width:** 1134 mm - **Thickness:** 35 mm - **Weight:** 26.0 kg - **Area:** 2.38 m2 - **Power density:** 222.7 Wp/m2 ### Warranty and degradation - **Product warranty:** 12 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 87.4 % - **Annual degradation:** 0.40 % - **Output after 30 years:** 463 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 5544 of 14129 | | Power density | 5562 of 14129 | | Temperature coefficient | 6152 of 14129 | | Weight | 2704 of 14129 | | Warranty | 21 of 14129 | ## Pros - **N-type TOPCon cells with half-cut technology** - The use of N-type monocrystalline half-cut cells with 16 busbars reduces losses under partial shading and improves temperature coefficients compared to older PERC cells, resulting in higher and more stable real-world energy yield. - **Additional energy gain from bifacial design** - The double-sided module design captures light reflected from the ground, generating an additional energy gain of roughly ten to over twenty percent depending on surface albedo, directly lowering the installation's LCOE. - **30-year linear power warranty with 87.4% retention** - The manufacturer guarantees at least 87.4% of nominal power retained after 30 years of operation, in line with top-tier TOPCon modules, providing investors with predictable long-term returns. - **Tier-1 manufacturer with 19 years of experience** - Philadelphia Solar has operated since 2007 and is listed as a Tier-1 bankable manufacturer, easing project financing for commercial and industrial installations and increasing investor and lender confidence in the series. - **High resistance to PID degradation** - Rigorous material control and optimized manufacturing processes deliver strong resistance to potential-induced degradation (PID), important for large-scale PV farms operating at high string voltages. ## Cons - **Efficiency trails top segment peers** - Maximum efficiency of 22.69% is lower than comparable 540 Wp competitors such as Gokin GK-5-60HG (24.4%) and Horay Solar HS 199R-120 TC-D Delta (23.1%), meaning slightly lower power output per roof area than the best-in-class alternatives. - **Product warranty shorter than some competitors** - The 12-year product warranty is a common market standard, but several Tier-1 manufacturers now offer 15-year product warranties alongside a comparable 30-year linear power warranty, which may be a differentiating factor for large commercial projects. ## About this series The NEXUS PS-MNB132(HCBF) series is a bifacial photovoltaic module built with N-type monocrystalline cells in a **half-cut** configuration, which reduces power losses from partial shading mismatch and improves the panel's temperature behavior during operation. Thanks to **16 busbars** and an optimized cell layout, the module handles current collection more efficiently, translating into steadier energy yield across variable irradiance conditions. The **bifacial technology** lets the panel capture light reflected off the ground, adding extra energy harvest that can reach into the mid-to-high double digits depending on surface albedo, which helps lower the real levelized cost of energy (LCOE). These panels stand out for their strong **PID resistance**, achieved through strict material control and optimized manufacturing processes, and their robust build withstands high mechanical loads on both the front and rear sides, making them suitable for industrial rooftops as well as large-scale solar power plants. The NEXUS series targets investors who expect high reliability over the long term, backed by a **long linear power warranty** with a very low annual degradation rate. It is a fitting choice for commercial, industrial, and off-grid installations where consistent yield and predictable return on investment matter most. ## Notable figures - Efficiency of 22.3% matches the \*\*N-type 500-550W\*\* median - At 222.7 W/m² power density, roof space requirements are typical for \*\*N-type 500-550W\*\* panels - Temperature coefficient of -0.30%/°C matches the \*\*N-type 500-550W\*\* median - Bifaciality factor of 80% can add 4-12% extra yield with reflective mounting surface - In the top 39% for efficiency among all N-type panels ## Questions ### How does the NEXUS PS-MNB132(HCBF) panel differ from a standard monofacial panel? The NEXUS PS-MNB132(HCBF) is a bifacial module, meaning it generates power from both the front and rear sides, capturing light reflected off the ground surface. Depending on the albedo of the mounting surface (e.g., bright gravel or a PVC roof membrane), this can add an extra energy yield of roughly ten to twenty-plus percent compared to a monofacial panel of the same nominal power. ### What warranty comes with the NEXUS PS-MNB132(HCBF) series? Philadelphia Solar offers a 12-year product warranty and a 30-year linear power warranty for the NEXUS PS-MNB132(HCBF) series. This translates into a very low, predictable annual degradation rate over three decades, an important factor when projecting ROI for commercial and industrial installations. ### What benefits do half-cut cells and 16 busbars provide in the NEXUS panel? Half-cut cells reduce power loss under partial shading, since current takes a shorter path and a shaded half-string doesn't disable the entire cell chain. Combined with 16 busbars, the module collects current from each cell more efficiently, lowering resistive losses and delivering a more stable energy yield, especially under variable irradiance conditions. ### Is the NEXUS PS-MNB132(HCBF) suitable for large-scale solar farms? Yes, the 540 Wp power rating, a rugged frame rated for high mechanical loads on both front and rear sides, and strong PID resistance make this series well suited for large ground-mount farms and industrial rooftops. Philadelphia Solar's Tier 1 status also simplifies bank financing for large-scale projects. ### What is an N-type cell and how does it differ from the more common P-type? N-type cells use a different silicon doping structure than the cheaper, more widespread P-type cells, giving them higher efficiency, a better temperature coefficient, and much lower susceptibility to light-induced degradation (LID). In practice, this means higher and more stable energy output over the system's lifetime, particularly in hot climates. ### Is it worth buying solar panels from a Jordan-based manufacturer? Philadelphia Solar is a Jordan-based Tier 1 manufacturer per Bloomberg NEF classification, indicating financial stability, a proven production track record, and bankability for debt-financed projects. Manufacturing outside China can also be valuable for investors seeking supply-chain diversification or avoiding anti-dumping tariffs on Chinese-origin components. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/Datasheet-PS-MNB132HCBF-520W-540W-4ffe4b75acba.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [Longi Solar LR7-54HJD-510M](https://comparepv.com/panel/longi-lr7-54hjd-510m) | 510 W | Cooler, lighter, +2.7 pp | | [AIKO AIKO-A495-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a495-mce54mw) | 495 W | Cooler, lighter, +2.5 pp | | [Longi Solar LR7-60HVH-560M](https://comparepv.com/panel/longi-lr7-60hvh-560m) | 560 W | +30 W, cooler, +2.5 pp | | [Longi Solar LR7-54HJD-505M](https://comparepv.com/panel/longi-lr7-54hjd-505m) | 505 W | -25 W, cooler, +2.4 pp | | [WINAICO WST-505BKX54-A2](https://comparepv.com/panel/winaico-wst-505bkx54-a2) | 505 W | -25 W, cooler, +2.4 pp | | [Longi Solar LR7-60HVH-555M](https://comparepv.com/panel/longi-lr7-60hvh-555m) | 555 W | +25 W, cooler, +2.3 pp | | [AIKO AIKO-A490-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a490-mce54mw) | 490 W | -40 W, lighter, +2.2 pp | | [Philadelphia Solar PS-M132(HCBF)-500W](https://comparepv.com/panel/philadelphia-solar-ps-m132-hcbf-500w) | 500 W | Hotter, -1.3 pp, -5 yr warranty | | [Philadelphia Solar PS-M132(HCBF)-505W](https://comparepv.com/panel/philadelphia-solar-ps-m132-hcbf-505w) | 505 W | Hotter, -1.1 pp, -5 yr warranty | | [Philadelphia Solar PS-M132(HCBF)-510W](https://comparepv.com/panel/philadelphia-solar-ps-m132-hcbf-510w) | 510 W | Hotter, -0.8 pp, -5 yr warranty | | [Philadelphia Solar PS-MNB132(HCBF)-520W](https://comparepv.com/panel/philadelphia-solar-ps-mnb132-hcbf-520w) | 520 W | -10 W, -0.4 pp | | [Philadelphia Solar PS-MNB132(HCBF)-525W](https://comparepv.com/panel/philadelphia-solar-ps-mnb132-hcbf-525w) | 525 W | -0.2 pp | | [Philadelphia Solar PS-MNB132(HCBF)-535W](https://comparepv.com/panel/philadelphia-solar-ps-mnb132-hcbf-535w) | 535 W | +0.2 pp | | [Gamko New Energy GKA120N-PRO-590W](https://comparepv.com/panel/gamko-new-energy-gka120n-pro-590w) | 590 W | +60 W, +1.6 pp | | [Gamko New Energy GKA120N-PRO-585W](https://comparepv.com/panel/gamko-new-energy-gka120n-pro-585w) | 585 W | +55 W, +1.4 pp | | [Bisol BGO 580](https://comparepv.com/panel/bisol-bgo-580) | 580 W | +50 W, cooler, +1.2 pp | --- Source: https://comparepv.com/panel/philadelphia-solar-ps-mnb132-hcbf-530w Not in this file, on the page: a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.