---
title: "New East Solar NESE 430-54THB-M10 430W Solar Panel - Specs & Review | ComparePV"
description: "New East Solar NESE 430-54THB-M10 430W solar panel. Specs: 22.02% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient."
source: "https://comparepv.com/panel/new-east-solar-nese-430-54thb-m10"
updated: 2026-09-11
---

# New East Solar NESE 430-54THB-M10

Middle of its segment, heavy for its output

1,218 panels in the segment TOPCon 400-450 W


## Identity

- **Manufacturer:** New East Solar
- **Model:** NESE 430-54THB-M10
- **Series:** NESE 435-54THB-M10
- **Rated power:** 430 W
- **Cell technology:** TOPCon
- **Bifacial:** yes


## How it compares

Compared against segment TOPCon 400-450 W (1218 panels).


| Measure | This panel | Segment median | Standing | Rank |
| --- | --- | --- | --- | --- |
| Power (Wp) | 430 W | 435 W | Typical |  |
| Module efficiency | 22.02% | 22.00% | Typical | 6,329 |
| Power density | 220.2 | 220.2 | Typical | 6,481 |
| Temperature coefficient | -0.300 | -0.290 | Typical | 6,093 |
| Weight (kg) | 24.5 kg | 22.0 kg | Weak - bottom 14% |  |
| Performance warranty | 30 yrs | 30 yrs | Typical | 21 |


### Full peer table


| Measure | This panel | Segment median | Standing | Rank |
| --- | --- | --- | --- | --- |
| Module efficiency | 22.02% | 22.00% | Typical | 6,329 |
| Power density | 220.2 | 220.2 | Typical | 6,481 |
| Temperature coefficient | -0.300 | -0.290 | Typical | 6,093 |
| Weight per kWp | 57.0 | 51.4 | Weak - bottom 14% | 10,964 |
| Performance warranty | 30 yrs | 30 yrs | Typical | 21 |


### Watch out for

- **57.0 kg per kWp** - Bottom 14% of the TOPCon 400-450 W segment, against a median of 51.4.

- **Not ideal for:** Weight-limited structures.


## Specification


### Electrical

- **Rated power (Pmax):** 430 W
- **Efficiency:** 22.02 %
- **Voltage at Pmax (Vmp):** 31.90 V
- **Current at Pmax (Imp):** 13.48 A
- **Open-circuit voltage (Voc):** 38.40 V
- **Short-circuit current (Isc):** 14.25 A
- **Max system voltage:** 1500 V


### Temperature

- **Temperature coefficient of Pmax:** -0.300 %/degC
- **Temperature coefficient of Voc:** -0.250 %/degC
- **Temperature coefficient of Isc:** 0.046 %/degC
- **NOCT:** 44 degC


### Cell and construction

- **Cell type:** Monocrystalline
- **Cell technology:** TOPCon
- **Cell count:** 108
- **Bifacial:** yes
- **Bifacial gain:** 30.00


### Physical

- **Length:** 1722 mm
- **Width:** 1134 mm
- **Thickness:** 30 mm
- **Weight:** 24.5 kg
- **Area:** 1.95 m2
- **Power density:** 220.2 Wp/m2


### Warranty and degradation

- **Product warranty:** 12 years
- **Performance warranty:** 30 years
- **Output guaranteed at end of warranty:** 87.4 %
- **First-year degradation:** 1.00 %
- **Annual degradation:** 0.40 %
- **Output after 30 years:** 376 W


## Rank in the whole catalogue


| Measure | Position |
| --- | --- |
| Efficiency | 6329 of 14005 |
| Power density | 6481 of 14005 |
| Temperature coefficient | 6093 of 14005 |
| Weight | 10964 of 14005 |
| Warranty | 21 of 14005 |


## Pros

- **N-type TOPCon + bifacial cells** - N-type TOPCon technology delivers lower LID degradation and better performance at high temperatures and low irradiance than older PERC cells. The bifacial module design additionally captures reflected light on the rear side, boosting overall system energy yield.
- **Efficiency at the top of the segment** - Peak efficiency of 22.28% places the NESE 435-54THB-M10 series just behind the leading comparable model (SunLink SL5N108 at 22.30%) and effectively on par with SunKean SKT415~435M10-108D4 (22.27%) and Lina Energy LEPV 108 Nexa (22.26%), putting it firmly among the top peer comparables.
- **30-year linear power warranty** - The 30-year linear power warranty matches the standard set by leading TOPCon manufacturers, giving investors a predictable, long-term energy yield and supporting a lower system LCOE calculation.
- **Tier-1 BNEF, bankable manufacturer** - New East Solar is listed as a BNEF Tier-1 manufacturer, which eases access to bank and leasing financing for installations using these panels - a key factor for commercial projects and larger prosumer installations.
- **Compact M10 format with Full Black aesthetics** - The 108 half-cut M10-format cell design maximizes power output on limited roof area, while the black frame combined with a dark coating (Full Black) makes the module a visually attractive choice for single-family homes where roof aesthetics matter.


## Cons

- **Shorter product warranty period** - The 12-year product warranty is shorter than what some TOPCon segment leaders now offer on their premium residential lines - e.g., Trina Solar (TrinaProtect, 25 years) or JA Solar DeepBlue (25-year product / 30-year performance). For investors seeking maximum service coverage this may be a differentiating factor, despite the industry-standard 30-year power warranty.
- **Shorter track record in the European market** - New East Solar shifted manufacturing to Cambodia relatively recently, as part of a supply-chain adjustment to anti-dumping regulations, meaning a shorter documented track record in the European market compared to brands like JinkoSolar, Trina Solar, or LONGi, which have been established in Poland for over a decade with extensive service networks.


## About this series

The New East Solar NESE 435-54THB-M10 panels are an advanced solution based on **N-type TOPCon cell technology**, which ensures significantly higher efficiency and better performance in difficult lighting conditions than traditional modules. Thanks to the use of a black frame and dark coating, this series features an **elegant Full Black design**, making it an ideal choice for investors who care about the highest roof aesthetics. The use of modern M10 format cells allows for maximizing power from a limited area, effectively solving the problem of small roofs with complex geometry. These panels stand out for their **exceptionally low degradation rate**, which guarantees stable production of free energy for decades and a much faster return on investment. The design based on 108 half-cells translates into compact dimensions and optimal weight, which facilitates installation on single-family houses and prosumer structures. Compared to market competitors, this model offers an **excellent price-to-performance ratio** and increased resistance to LID, or light-induced degradation. It is a reliable choice for those looking for modern technology that combines high operational performance with an uncompromising look for the entire installation. These modules perform excellently in the Polish climate, offering parameter stability even at high ambient temperatures.


## Notable figures

- Efficiency of 22.0% matches the \*\*TOPCon 400-450W\*\* median
- Power density of 220.2 W/m² matches the \*\*TOPCon 400-450W\*\* median
- At -0.30%/°C, hot weather performance is typical for \*\*TOPCon 400-450W\*\* panels
- Weight of 24.5 kg is 2.5 kg above \*\*TOPCon 400-450W\*\* median (22.0 kg) - verify structural support
- Bifaciality factor of 80% can add 4-12% extra yield with reflective mounting surface


## Questions


### What warranties come with the New East Solar NESE 435-54THB-M10 panels?

The manufacturer provides a 12-year product warranty covering material and workmanship defects, along with a 30-year linear power warranty. Under the power warranty, the panel is guaranteed to deliver at least 87.4% of its rated output after 30 years of operation. Thanks to the N-type TOPCon cell technology, annual degradation is approximately 0.4%, meaning real-world performance often exceeds the minimum guaranteed levels throughout the module's service life.


### Is the NESE 435-54THB-M10 a bifacial panel, and does it matter for a rooftop installation?

Yes, the NESE 435-54THB-M10 is a bifacial module, meaning the rear side also generates power from reflected irradiance. On a typical pitched roof without a highly reflective surface below, bifacial gain typically ranges from 5 to 10%. The full benefit of bifacial technology is realized in ground-mounted systems above light-colored surfaces such as gravel or concrete. On rooftops, bifacial construction still improves yield under diffuse light conditions common in Central Europe.


### Why are N-type TOPCon cells in the NESE 435-54THB-M10 better than standard PERC modules?

N-type TOPCon cells deliver higher conversion efficiency (typically above 23.5%), a lower temperature coefficient (approx. -0.30%/°C vs. -0.40%/°C for PERC), and significantly lower light-induced degradation (LID) during initial light exposure. In practice this means more energy output on hot days and more stable production over the system's lifetime, resulting in a faster LCOE improvement and faster return on investment compared to same-wattage PERC modules.


### Do the New East Solar NESE 435-54THB-M10 Full Black panels work well on a small or complex roof?

The NESE 435-54THB-M10 uses 108 half-cut M10 format cells, resulting in compact dimensions and a weight below 22 kg. The half-cut cell layout reduces mismatch losses from partial shading, which is common on roofs with dormers or chimneys. The all-black frame and backsheet of the Full Black design minimize visual impact on the building facade. These characteristics make the series a strong fit for small or irregular roof sections where maximizing power per square meter is critical.


### Is New East Solar a reliable manufacturer, and where are the panels made?

New East Solar Energy, headquartered in Cambodia, holds Tier 1 manufacturer status, meaning it has been independently audited and recognized by financial industry analysts such as Bloomberg NEF. Tier 1 status is important for project bankability and warranty security. The company produces crystalline silicon modules for the European market, including Poland, and supplies panels certified to IEC and MCS standards, ensuring compatibility with standard grid-tied inverters and regulatory requirements.


### How does the NESE 435-54THB-M10 perform in winter and on overcast days?

N-type TOPCon technology delivers superior response to diffuse irradiance compared to standard PERC cells, which is particularly relevant in Central Europe where overcast days are frequent. The low temperature coefficient (approx. -0.30%/°C) also reduces power losses during summer heat. In winter, the module operates efficiently at low temperatures, and the bifacial construction can capture additional reflected irradiance from snow on the roof surface or ground below the array.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/1729755178362958-770cbc9c264a.pdf)


## Alternatives


| Panel | Power | How it differs |
| --- | --- | --- |
| [AIKO AIKO-A480-MAH54Mw](https://comparepv.com/panel/aiko-aiko-a480-mah54mw) | 480 W | +50 W, cooler, +2.1 pp |
| [Gokin GK-5-54HG-480M](https://comparepv.com/panel/gokin-gk-5-54hg-480m) | 480 W | +50 W, cooler, +2.1 pp |
| [Jinko Solar JKM480N-48QL6-DB-F2-EU](https://comparepv.com/panel/jinko-solar-jkm480n-48ql6-db-f2-eu) | 480 W | +50 W, cooler, +2.0 pp |
| [Gamko New Energy GKA96N-PRO-480W](https://comparepv.com/panel/gamko-new-energy-gka96n-pro-480w) | 480 W | +50 W, lighter, +2.0 pp |
| [New East Solar NESE 415-54THB-M10](https://comparepv.com/panel/new-east-solar-nese-415-54thb-m10) | 415 W | -15 W, -0.8 pp |
| [New East Solar NESE 420-54THB-M10](https://comparepv.com/panel/new-east-solar-nese-420-54thb-m10) | 420 W | -10 W, -0.5 pp |
| [New East Solar NESE 425-54THB-M10](https://comparepv.com/panel/new-east-solar-nese-425-54thb-m10) | 425 W | -0.3 pp |
| [New East Solar NESE 435-54THB-M10](https://comparepv.com/panel/new-east-solar-nese-435-54thb-m10) | 435 W | +0.3 pp |
| [Longi Solar LR7-54HJD-510M](https://comparepv.com/panel/longi-lr7-54hjd-510m) | 510 W | +80 W, cooler, +3.0 pp |
| [AIKO AIKO-A495-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a495-mce54mw) | 495 W | +65 W, cooler, +2.8 pp |
| [Longi Solar LR7-54HJD-505M](https://comparepv.com/panel/longi-lr7-54hjd-505m) | 505 W | +75 W, cooler, +2.7 pp |
| [AIKO AIKO-A490-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a490-mce54mw) | 490 W | +60 W, cooler, +2.5 pp |
| [Longi Solar LR7-54HJD-500M](https://comparepv.com/panel/longi-lr7-54hjd-500m) | 500 W | +70 W, cooler, +2.5 pp |
| [Talesun CIPRO-TN9C54M-500W](https://comparepv.com/panel/talesun-cipro-tn9c54m-500w) | 500 W | +70 W, cooler, +2.5 pp |


---

Source: https://comparepv.com/panel/new-east-solar-nese-430-54thb-m10

Not in this file, on the page: the I-V and temperature curves lifted from the manufacturer's datasheet, a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.

