--- title: "MY Solar MYM2036-160 160W Solar Panel - Specs & Review | ComparePV" description: "MY Solar MYM2036-160 160W solar panel. Specs: 16.10% efficiency, Polycrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/my-solar-mym2036-160" updated: 2026-09-11 --- # MY Solar MYM2036-160 Solid all-round for its segment 54 panels in the segment PERC 150-200 W ## Identity - **Manufacturer:** MY Solar - **Model:** MYM2036-160 - **Series:** P2 series - **Rated power:** 160 W - **Cell technology:** PERC ## How it compares Compared against segment PERC 150-200 W (54 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 160 W | 175 W | Typical | | | Module efficiency | 16.10% | 16.60% | Typical | 13,624 | | Power density | 161.4 | 162.7 | Typical | 13,610 | | Temperature coefficient | -0.370 | -0.370 | Typical | 13,081 | | Weight (kg) | 11.2 kg | 11.3 kg | Typical | | | Performance warranty | 25 yrs | 25 yrs | Typical | 9,798 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 16.10% | 16.60% | Typical | 13,624 | | Power density | 161.4 | 162.7 | Typical | 13,610 | | Temperature coefficient | -0.370 | -0.370 | Typical | 13,081 | | Weight per kWp | 70.0 | 68.5 | Typical | 13,406 | | Performance warranty | 25 yrs | 25 yrs | Typical | 9,798 | - **Best for:** Residential, shaded-installations and cold-climate. ## Specification ### Electrical - **Rated power (Pmax):** 160 W - **Efficiency:** 16.10 % - **Voltage at Pmax (Vmp):** 18.70 V - **Current at Pmax (Imp):** 8.56 A - **Open-circuit voltage (Voc):** 22.80 V - **Short-circuit current (Isc):** 9.05 A - **Max system voltage:** 600 V ### Temperature - **Temperature coefficient of Pmax:** -0.370 %/degC - **Temperature coefficient of Voc:** -0.290 %/degC - **Temperature coefficient of Isc:** 0.048 %/degC - **NOCT:** 45 degC ### Cell and construction - **Cell type:** Polycrystalline - **Cell technology:** PERC - **Cell count:** 36 ### Physical - **Length:** 1480 mm - **Width:** 670 mm - **Thickness:** 35 mm - **Weight:** 11.2 kg - **Area:** 0.99 m2 - **Power density:** 161.4 Wp/m2 ### Warranty and degradation - **Product warranty:** 12 years - **Performance warranty:** 25 years - **Output guaranteed at end of warranty:** 80.0 % - **First-year degradation:** 2.50 % - **Annual degradation:** 0.73 % - **Output after 30 years:** 122 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 13624 of 14005 | | Power density | 13610 of 14005 | | Temperature coefficient | 13081 of 14005 | | Weight | 13406 of 14005 | | Warranty | 9798 of 14005 | ## Pros - **Half-Cut cells reduce losses** - The half-cut cell architecture lowers resistive losses and mitigates partial-shading effects, and the smaller silicon fragments are less prone to microcracks than full-size cells used in older module designs. - **Up to 17.1% efficiency on the top variant** - The top-end efficiency (17.1%) matches the comparable JA Solar P2 series (170 Wp, 17.1%) and exceeds competing ASM170M and AU Optronics ASM Mono, both at 16%. - **25-year linear power warranty** - The stated 25-year linear power warranty is in line with the segment standard and supports a stable long-term energy yield forecast for the installation. - **All Black finish and reinforced snow-load frame** - The aesthetic All Black finish combined with a reinforced frame rated for high snow loads makes the series a good fit for residential installations in the Polish climate. ## Cons - **Manufacturer not on the BNEF Tier 1 list** - MY Solar is not classified as a Tier 1 (bankable) manufacturer under BNEF criteria, which in practice can make bank financing or insurance harder to secure for larger commercial projects compared to the same power-class JA Solar P2 series. - **Low efficiency on the entry-level variant** - The weakest variant reaches only 15.1% efficiency, roughly 0.9 pp below comparable ASM170M and AU Optronics ASM Mono modules (16%) — actual efficiency thus depends heavily on which variant in the series is selected. - **Short product warranty — 12 years** - The 12-year product warranty is shorter than the 15–25 year standard now offered by leading PERC/N-type panel manufacturers, which can reduce the installation's resale value over the long term. - **PERC technology instead of N-type** - PERC cells lag behind the increasingly common N-type technologies (TOPCon, HJT) in LID/LeTID degradation resistance and temperature coefficient, which can translate into slightly lower energy yield during high summer temperatures. ## About this series The MY Solar P2 photovoltaic panel series is an advanced solution based on **Half-Cut cell technology**, which effectively minimizes energy losses resulting from partial shading and internal resistance. Thanks to the use of modern architecture, these modules offer significantly higher efficiency compared to standard designs, which translates into a faster return on investment for owners of single-family homes and commercial buildings. A key distinguishing feature of the P2 series is its **exceptional resistance to potential-induced degradation (PID)**, which guarantees stable power production for decades, even in demanding weather conditions. These panels perform excellently on cloudy days and at low light angles, ensuring **maximum energy yield in low-light conditions**. The robust frame construction allows for safe installation in locations exposed to heavy snow loads, solving the problem of installation durability in the Polish climate. For investors who value aesthetics, the P2 series provides an **elegant All Black finish**, which blends perfectly with modern architecture. Choosing this series means opting for proven reliability, which distinguishes it from the competition through lower susceptibility to micro-cracks and a better temperature coefficient, making it the optimal basis for an efficient and aesthetic micro-installation. ## Notable figures - Efficiency of 16.1% is 3.3pp below the \*\*PERC 0-400W\*\* median (19.4%) - 161.4 W/m² power density is 33.0 W/m² below \*\*PERC 0-400W\*\* median (194.4 W/m²) - requires larger installation area - Temperature coefficient of -0.37%/°C matches the \*\*PERC 0-400W\*\* median - At 11.2 kg, this panel is 9.3 kg lighter than \*\*PERC 0-400W\*\* median (20.5 kg) - easier handling during installation - #13624 for efficiency, #13081 for temperature performance out of 14005 panels ## Questions ### What warranty does the MY Solar P2 series offer? The MY Solar P2 series comes with a 12-year product warranty covering material and manufacturing defects. In addition, the manufacturer provides a 25-year linear power output warranty, guaranteeing that the panel will maintain its rated efficiency according to the declared degradation curve for a quarter century. These terms should be confirmed with an authorized distributor, and purchase documents should be retained for any future warranty claims. ### Do MY Solar P2 panels perform well in cloudy conditions and low irradiance? Yes, the P2 series is optimized for low-irradiance conditions. The Half-Cut PERC cell technology improves performance under diffuse light and low sun angles typical of Polish autumn and winter seasons. As a result, the installation operates more efficiently even on overcast days, directly contributing to a higher annual energy yield compared to conventional full-cell modules. ### What is PID resistance in the MY Solar P2 series and why does it matter? PID (Potential Induced Degradation) is a phenomenon of gradual power loss caused by high voltage and moisture acting on solar cells over time. The P2 series features enhanced PID resistance, protecting modules from permanent efficiency degradation throughout their operational lifetime. This is especially important in string configurations operating at high system voltages and in Poland's humid climate conditions. ### Can the MY Solar P2 series withstand heavy snow loads typical of Polish climate? Yes, the robust aluminum frame of MY Solar P2 modules is engineered for high mechanical loads, making this series a suitable choice for rooftop installations in mountainous and suburban Polish locations where accumulated snow can generate significant mechanical stress. Before installation, it is advisable to verify the maximum allowable surface load in the datasheet for the specific model variant. ### How does the Half-Cut PERC technology in the P2 series differ from standard PV cells? Half-Cut technology splits standard PERC cells in half, reducing internal resistance and minimizing losses caused by partial shading. Compared to conventional full-cell modules, the MY Solar P2 series achieves higher energy conversion efficiency and is less sensitive to shadows cast by chimneys, antennas, or adjacent roof elements, which is a common installation challenge in residential rooftop systems. ### Is the MY Solar P2 series available in an All Black version, and does it affect performance? Yes, the MY Solar P2 series is offered in an All Black variant featuring a black frame and black backsheet, integrating seamlessly with modern architecture. It should be noted that the black backsheet may slightly increase the module's operating temperature on hot days. This factor is worth accounting for during system design by ensuring adequate ventilation beneath the panels to preserve long-term output. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/Product-specification-MYP2036-150-170-ENG20200101-70bbae37b322.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [JA Solar MYP3036-180](https://comparepv.com/panel/ja-solar-myp3036-180) | 180 W | +20 W, +1.5 pp | | [MY Solar MYP3036-180](https://comparepv.com/panel/my-solar-myp3036-180) | 180 W | +20 W, +1.5 pp | | [JA Solar MYP3036-175](https://comparepv.com/panel/ja-solar-myp3036-175) | 175 W | +15 W, +1.1 pp | | [MY Solar MYP3036-175](https://comparepv.com/panel/my-solar-myp3036-175) | 175 W | +15 W, +1.1 pp | | [MY Solar MYM2036-170](https://comparepv.com/panel/my-solar-mym2036-170) | 170 W | +10 W, +1.0 pp | | [Waaree WS-195 /24V](https://comparepv.com/panel/waaree-ws-195-24v) | 195 W | +35 W, +0.7 pp, -15 yr warranty | | [JA Solar MYP3036-170](https://comparepv.com/panel/ja-solar-myp3036-170) | 170 W | +10 W, +0.6 pp | | [MY Solar MYP3036-170](https://comparepv.com/panel/my-solar-myp3036-170) | 170 W | +10 W, +0.6 pp | | [MY Solar MYM2036-165](https://comparepv.com/panel/my-solar-mym2036-165) | 165 W | +0.5 pp | | [MY Solar MYM2036-150](https://comparepv.com/panel/my-solar-mym2036-150) | 150 W | -10 W, -1.0 pp | | [MY Solar MYM2036-155](https://comparepv.com/panel/my-solar-mym2036-155) | 155 W | -0.5 pp | | [Heckert Solar ZEUS 1.2 FullBlack 280W](https://comparepv.com/panel/heckert-solar-zeus-1-2-fullblack-280w) | 280 W | +120 W, cooler, +7.2 pp | | [Gamko New Energy GKA182M285W](https://comparepv.com/panel/gamko-new-energy-gka182m285w) | 285 W | +125 W, +6.9 pp, +5 yr warranty | | [Gamko New Energy GKA182M240W](https://comparepv.com/panel/gamko-new-energy-gka182m240w) | 240 W | +80 W, +6.9 pp, +5 yr warranty | | [Gamko New Energy GKA182M260W](https://comparepv.com/panel/gamko-new-energy-gka182m260w) | 260 W | +100 W, +6.9 pp, +5 yr warranty | | [Gamko New Energy GKA182M270W](https://comparepv.com/panel/gamko-new-energy-gka182m270w) | 270 W | +110 W, +6.9 pp, +5 yr warranty | --- Source: https://comparepv.com/panel/my-solar-mym2036-160 Not in this file, on the page: a thirty-year output simulator and alternatives filtered by how closely they match these dimensions.