--- title: "Luxor Solar LX-415M/182-108+ GG Solar Panel: Specs & Datasheet | ComparePV" description: "Luxor Solar LX-415M/182-108+ GG solar panel. Specs: 21.58% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/luxor-lx-415m-182-108-gg" image: "https://comparepv.com/og/panel/luxor-lx-415m-182-108-gg.png" updated: 2026-09-11 --- # Luxor Solar LX-415M/182-108+ GG Middle of its segment, needs the roof space 1,220 panels in the segment TOPCon 400-450 W ## Identity - **Manufacturer:** Luxor Solar - **Model:** LX-415M/182-108+ GG - **Series:** ECO LINE N-TYPE TOPCON GLASS-GLASS BIF. - **Rated power:** 415 W - **Cell technology:** TOPCon - **Bifacial:** yes ## How it compares Compared against segment TOPCon 400-450 W (1220 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 415 W | 435 W | Weak - bottom 9% | | | Module efficiency | 21.58% | 22.00% | Typical | 7,792 | | Power density | 212.5 | 220.2 | Weak - bottom 10% | 8,858 | | Temperature coefficient | -0.300 | -0.290 | Typical | 6,152 | | Weight (kg) | 21.5 kg | 22.0 kg | Typical | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 21.58% | 22.00% | Typical | 7,792 | | Power density | 212.5 | 220.2 | Weak - bottom 10% | 8,858 | | Temperature coefficient | -0.300 | -0.290 | Typical | 6,152 | | Weight per kWp | 51.8 | 51.5 | Typical | 5,203 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Watch out for - **212.5 watts per square metre** - Bottom 10% of the TOPCon 400-450 W segment, against a median of 220.2. - **Best for:** Commercial and agrivoltaic. - **Not ideal for:** Roofs where every square metre has to count. ## Specification ### Electrical - **Rated power (Pmax):** 415 W - **Efficiency:** 21.58 % - **Voltage at Pmax (Vmp):** 31.32 V - **Current at Pmax (Imp):** 13.26 A - **Open-circuit voltage (Voc):** 37.92 V - **Short-circuit current (Isc):** 13.99 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.300 %/degC - **Temperature coefficient of Voc:** -0.250 %/degC - **Temperature coefficient of Isc:** 0.045 %/degC - **NOCT:** 45 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** TOPCon - **Cell count:** 108 - **Bifacial:** yes - **Bifacial gain:** 25.00 ### Physical - **Length:** 1722 mm - **Width:** 1134 mm - **Thickness:** 30 mm - **Weight:** 21.5 kg - **Area:** 1.95 m2 - **Power density:** 212.5 Wp/m2 ### Warranty and degradation - **Product warranty:** 30 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 89.0 % - **First-year degradation:** 1.00 % - **Annual degradation:** 0.34 % - **Output after 30 years:** 370 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 7792 of 14129 | | Power density | 8858 of 14129 | | Temperature coefficient | 6152 of 14129 | | Weight | 5203 of 14129 | | Warranty | 21 of 14129 | ## Pros - **Higher efficiency than peers** - The 21.58% efficiency exceeds direct competitors in the 415 Wp segment: LEDVANCE M395~415P54LM-BF-F3 (21.25%), AE Solar AURORA AE MD-108 (21.28%), and monofacial Aptos Solar DNA 108 (21.25%). The advantage stems from N-type TOPCon cells versus older PERC technology. - **30-year product and power warranty** - Luxor Solar provides a 30-year product and linear power warranty, guaranteeing 89% output after 30 years of operation. This is notably longer than the standard 25-year terms offered by many manufacturers in this power segment. - **Glass-glass construction boosts durability** - The double-glass design delivers higher mechanical load resistance and protection against microcracks and ammonia-related corrosion, making the panel suitable for agri-PV applications and utility-scale ground-mount farms with more demanding operating conditions than typical rooftop installations. - **Full bifaciality raises yield** - The module generates power on both sides of the cell, which in ground-mount installations with suitable ground albedo can increase total energy yield by up to double digits versus comparable monofacial modules such as the Aptos Solar DNA 108-Monofacial. - **Low LID degradation** - N-type TOPCon cells eliminate the light-induced degradation (LID) effect typical of older P-type/PERC cells, delivering more stable energy production in the early years of the system's operation. ## Cons - **No BNEF Tier-1 status** - Luxor Solar (Germany, founded 2007) does not appear on the current BNEF Tier-1 manufacturer list, unlike many leading suppliers in the 415 Wp segment. This may complicate bank financing for large-scale utility projects despite the module's solid technical specifications. ## About this series The Luxor Solar ECO LINE N-TYPE TOPCON GLASS-GLASS BIF series redefines market performance standards through a unique synergy of **N-type cells and TOPCon technology**. This advanced solution effectively eliminates the problem of light-induced degradation, offering investors unprecedented stability of energy yields for decades. The exceptional **glass-glass construction** provides extreme resistance to weather conditions, micro-cracks, and the corrosive effects of ammonia, making these panels an unrivaled choice for agriculture and large-scale projects. A key advantage of the series is its **full bifaciality**, which allows for efficient energy harvesting from radiation reflected off the ground, drastically increasing the profitability of ground-mounted systems. Unlike commonly used monofacial modules, these panels are characterized by excellent performance in diffused light and a low temperature coefficient, guaranteeing high production even on hot days. This product is dedicated to conscious investors who prioritize **maximum lifespan and fire safety** of the installation. Thanks to innovative passivating layers, these modules minimize internal losses, setting a new direction in LCOE energy cost optimization for the most demanding photovoltaic projects in Poland. ## Notable figures - At 21.6% efficiency, this panel is on par with typical \*\*TOPCon 400-450W\*\* modules - 212.5 W/m² power density is 7.7 W/m² below \*\*TOPCon 400-450W\*\* median (220.2 W/m²) - requires larger installation area - At -0.30%/°C, hot weather performance is typical for \*\*TOPCon 400-450W\*\* panels - Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof - In the top 55% for efficiency among all TOPCon panels ## Questions ### What warranty comes with the Luxor Solar ECO LINE N-Type TOPCon Glass-Glass Bifacial panels? The Luxor Solar ECO LINE N-Type TOPCon Glass-Glass Bifacial series carries a 30-year product warranty and a 30-year linear power warranty guaranteeing at least 89% of rated output after three decades of operation. This is among the longest warranties available in the PV module market, made possible by the inherent durability of N-Type TOPCon cell technology combined with the frameless glass-glass construction. ### What is TOPCon technology and how does it compare to standard PERC panels? TOPCon (Tunnel Oxide Passivated Contact) is an N-type cell architecture featuring an ultra-thin tunnel oxide layer that suppresses carrier recombination at the rear contact. Compared to PERC, this translates to a lower temperature coefficient (approximately -0.30%/°C vs. -0.35%/°C for PERC) and significantly reduced light-induced degradation (LID). In practice, the Luxor ECO LINE TOPCon modules produce more energy during summer peaks and retain higher output throughout their 30-year lifespan. ### Are the Luxor ECO LINE TOPCon Glass-Glass Bifacial 415 Wp panels suitable for ground-mounted utility or farm installations? Yes, this series is purpose-built for ground-mounted and utility-scale applications. The bifacial design harvests energy from albedo reflected off the ground surface, delivering a real-world bifacial gain of 5 to 20% above the rated 415 Wp depending on mounting height and ground reflectivity (grass, gravel, snow). The glass-glass construction also provides exceptional resistance to ammonia corrosion, making these panels ideal for agrivoltaic and agricultural-adjacent projects. ### How do Luxor Solar ECO LINE TOPCon panels perform on hot summer days? The N-Type TOPCon cells in the ECO LINE series feature a low temperature coefficient of approximately -0.30%/°C, outperforming conventional PERC modules at -0.35%/°C. When the module heats up to 65°C under strong irradiance, power losses are measurably smaller than with first-generation technology. Over a typical Central European summer, this advantage translates to several additional kWh of production per month compared to an equivalent-rated PERC system. ### Why does the ECO LINE series use glass-glass construction instead of a standard backsheet? Replacing the polymer backsheet with a second tempered glass layer delivers multiple structural and longevity benefits. The module becomes resistant to microcracks from mechanical stress, moisture ingress through laminate edges, and ammonia corrosion common near livestock facilities. Glass-glass construction is also a technical prerequisite for full bifacial functionality and meaningfully extends actual service life, directly supporting the manufacturer's 30-year product warranty. ### Is Luxor Solar a European manufacturer and how does that affect ECO LINE quality? Luxor Solar is headquartered in Stuttgart, Germany. The company designs its modules to European quality standards with engineering oversight from concept to certification, though physical production is carried out in Asia - standard practice across the PV industry. Having a Germany-based entity issue the 30-year product and power warranty is a practical advantage for European buyers, as warranty claims can be enforced within EU legal frameworks without cross-border complications. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/lx-el-n-type-gg-bif-bw-m108-415-435w-182-en-9b60db6a94d5.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [Just Solar JST-EDMH-(445-465)W-TD (465W class)](https://comparepv.com/panel/just-solar-jst-edmh-445-465-w-td-465w-class) | 465 W | +50 W, lighter, +2.2 pp | | [Luxor Solar LX-465M/182R-96+ GG](https://comparepv.com/panel/luxor-lx-465m-182r-96-gg) | 465 W | +50 W, cooler, +2.2 pp | | [AIKO AIKO-A460-MAH54Mb](https://comparepv.com/panel/aiko-shenzhen-aiko-digital-energy-technology-co-ltd-aiko-a460-mah54mb-1) | 460 W | +45 W, cooler, +2.0 pp | | [Luxor Solar LX-465M/182R188-108+ GG](https://comparepv.com/panel/luxor-solar-lx-465m-182r188-108-gg) | 465 W | +50 W, heavier, +2.0 pp | | [Just Solar JST-EDMH-(445-465)W-TD (460W class)](https://comparepv.com/panel/just-solar-jst-edmh-445-465-w-td-460w-class) | 460 W | +45 W, lighter, +2.0 pp | | [Luxor Solar LX-460M/182R-96+ GG](https://comparepv.com/panel/luxor-lx-460m-182r-96-gg) | 460 W | +45 W, cooler, +2.0 pp | | [Philadelphia Solar PS-MNB108(HCBF)-460W](https://comparepv.com/panel/philadelphia-solar-ps-mnb108-hcbf-460w) | 460 W | +45 W, cooler, +2.0 pp | | [JA Solar JAT54S40-460/LR](https://comparepv.com/panel/ja-solar-jat54s40-460-lr) | 460 W | +45 W, cooler, +1.9 pp | | [Luxor Solar LX-395M/182-108+](https://comparepv.com/panel/luxor-solar-lx-395m-182-108) | 395 W | Hotter, -1.0 pp, -5 yr warranty | | [Luxor Solar LX-400M/182-108+](https://comparepv.com/panel/luxor-solar-lx-400m-182-108) | 400 W | Hotter, -0.8 pp, -5 yr warranty | | [Luxor Solar LX-405M/182-108+](https://comparepv.com/panel/luxor-solar-lx-405m-182-108) | 405 W | Hotter, -0.5 pp, -5 yr warranty | | [Luxor Solar LX-410M/182-108+](https://comparepv.com/panel/luxor-solar-lx-410m-182-108) | 410 W | Hotter, -0.3 pp, -5 yr warranty | | [Longi Solar LR7-54HJD-510M](https://comparepv.com/panel/longi-lr7-54hjd-510m) | 510 W | +95 W, cooler, +3.4 pp | | [AIKO AIKO-A495-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a495-mce54mw) | 495 W | +80 W, cooler, +3.2 pp | | [Longi Solar LR7-54HJD-505M](https://comparepv.com/panel/longi-lr7-54hjd-505m) | 505 W | +90 W, cooler, +3.1 pp | | [WINAICO WST-505BKX54-A2](https://comparepv.com/panel/winaico-wst-505bkx54-a2) | 505 W | +90 W, cooler, +3.1 pp | --- Source: https://comparepv.com/panel/luxor-lx-415m-182-108-gg Not in this file, on the page: the I-V and temperature curves lifted from the manufacturer's datasheet, a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.