--- title: "Lina Energy LPEPV 285 Solar Panel: Specs & Datasheet | ComparePV" description: "Lina Energy LPEPV 285 solar panel. Specs: 17.52% efficiency, Polycrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/lina-energy-lpepv-285" image: "https://comparepv.com/og/panel/lina-energy-lpepv-285.png" updated: 2026-09-11 --- # Lina Energy LPEPV 285 Middle of its segment, weak in heat 1,430 panels in the 185-385 W band, all technologies ## Identity - **Manufacturer:** Lina Energy - **Model:** LPEPV 285 - **Series:** LPEPV 60 SUPERIOR - **Rated power:** 285 W - **Cell technology:** Polycrystalline ## How it compares Compared against 185-385 W band, all technologies (1430 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 285 W | 330 W | Weak - bottom 22% | | | Module efficiency | 17.52% | 18.88% | Typical | 13,443 | | Power density | 175.2 | 188.2 | Typical | 13,439 | | Temperature coefficient | -0.410 | -0.360 | Weak - bottom 10% | 13,862 | | Weight (kg) | 18.5 kg | 20.0 kg | Typical | | | Performance warranty | 25 yrs | 25 yrs | Typical | 9,912 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 17.52% | 18.88% | Typical | 13,443 | | Power density | 175.2 | 188.2 | Typical | 13,439 | | Temperature coefficient | -0.410 | -0.360 | Weak - bottom 10% | 13,862 | | Weight per kWp | 64.9 | 61.8 | Typical | 13,139 | | Performance warranty | 25 yrs | 25 yrs | Typical | 9,912 | ### Watch out for - **-0.410 %/°C temperature coefficient** - Bottom 10% of the 185-385 W band, against a median of -0.360. Ranked 13,862nd in the whole database. - **Best for:** Residential and commercial. - **Not ideal for:** Hot climates. ## Specification ### Electrical - **Rated power (Pmax):** 285 W - **Efficiency:** 17.52 % - **Voltage at Pmax (Vmp):** 31.60 V - **Current at Pmax (Imp):** 9.02 A - **Open-circuit voltage (Voc):** 38.30 V - **Short-circuit current (Isc):** 9.49 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.410 %/degC - **Temperature coefficient of Voc:** -0.321 %/degC - **Temperature coefficient of Isc:** 0.051 %/degC - **NOCT:** 42 degC ### Cell and construction - **Cell type:** Polycrystalline - **Cell count:** 60 ### Physical - **Length:** 1640 mm - **Width:** 992 mm - **Thickness:** 35 mm - **Weight:** 18.5 kg - **Area:** 1.63 m2 - **Power density:** 175.2 Wp/m2 ### Warranty and degradation - **Product warranty:** 20 years - **Performance warranty:** 25 years - **Output guaranteed at end of warranty:** 80.0 % - **Output after 30 years:** 217 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 13443 of 14129 | | Power density | 13439 of 14129 | | Temperature coefficient | 13862 of 14129 | | Weight | 13139 of 14129 | | Warranty | 9912 of 14129 | ## Pros - **Glass-glass design improves durability** - The dual-glass construction, used instead of a standard backsheet, reduces the risk of cell microcracks and moisture ingress into the laminate, improving PID and LID resistance. This is a well-established advantage of glass-glass technology over backsheet modules, particularly in harsh weather conditions. - **Top-tier efficiency in the 60-cell 285Wp class** - Efficiency of 17.22-17.52% matches the Yingli LF285P6-60 (17.52%) and outperforms the Solitek SOLID Solrif (14.45%) by roughly 21% relative at the same maximum power. Among the supplied peer comparables, this ranks among the best results in the 285Wp segment. - **25-year power warranty** - A 20-year product warranty combined with a 25-year power warranty provides standard-for-generation investment protection, giving installers and investors a predictable service horizon. - **Compatible with legacy 60-cell installations** - The standard 60-cell format simplifies matching to existing mounting structures, strings, and inverters designed around older electrical layouts, making the series a practical choice for extending or repairing older installations of the same format. ## Cons - **Production discontinued** - The LPEPV 60 SUPERIOR series has been discontinued, limiting availability of warranty service, spare parts, and the ability to source identical modules for extending an existing installation. - **Specs fall short of current N-type standards** - The 280-285Wp power range and 17.22-17.52% efficiency on a 60-cell format correspond to a panel generation from roughly 2015-2018, while modern N-type TOPCon modules now reach 22-26% efficiency. This gap contradicts the marketing description that positions the series as advanced N-type technology. - **Low power density raises BoS costs** - At roughly 285Wp per module, reaching 1 kWp requires about 3.5 panels - substantially more than modern 400-500+ Wp tier-1 modules. This translates into higher mounting, cabling, and racking costs, plus greater roof or ground area requirements. - **Manufacturer not on the Tier 1 BNEF list** - Lina Energy (United Kingdom, founded 2017) does not appear on the current BNEF Tier 1 bankability list. Combined with the series' discontinued status, this increases long-term warranty-servicing risk compared to large, established Tier 1 manufacturers. ## About this series The Lina Energy LPEPV 60 SUPERIOR series consists of advanced modules that utilize innovative **N-type cell technology**, which directly translates into higher efficiency and a longer lifespan for the entire system. Thanks to the use of a bifacial structure, these panels absorb reflected light more effectively, making them an ideal solution for commercial and residential installations where every kilowatt-hour counts. A key differentiator is the **glass-glass construction**, providing exceptional resistance to atmospheric factors and mechanical damage, which significantly reduces the risk of micro-cracks in harsh weather conditions. This product effectively solves the problem of performance decline over time, offering **low annual degradation** and stable energy production for decades. Exceptional **resistance to PID and LID effects** makes the investment safer and more predictable in terms of return on investment. The SUPERIOR series stands out from the competition with its precise alignment with rigorous quality standards and optimized performance in low sunlight. This choice is dedicated to professional installations that require **maximum energy reliability** and modern design without quality compromises. ## Notable figures - Module efficiency of 17.5% is 4.3pp below average for \*\*database\*\* panels (median: 21.8%) - 175.2 W/m² power density is 42.9 W/m² below \*\*database\*\* median (218.1 W/m²) - requires larger installation area - At -0.41%/°C, loses 0.11pp more power per degree than \*\*database\*\* median (-0.30%/°C) - At 18.5 kg, this panel is 8.0 kg lighter than \*\*database\*\* median (26.5 kg) - easier handling during installation - Ranked #13443 out of 14129 panels for efficiency in the database ## Questions ### Is the Lina Energy LPEPV 60 SUPERIOR series still available for purchase? The LPEPV 60 SUPERIOR series has been discontinued and is no longer actively manufactured or distributed by Lina Energy. If you need modules from this series, check with distributors for remaining stock. When buying residual inventory, always verify the production date and inspect panels for any physical damage before installation. ### What warranties come with the Lina Energy LPEPV 60 SUPERIOR panels? Lina Energy offered a 20-year product warranty and a 25-year power output warranty on the LPEPV 60 SUPERIOR modules. The power warranty guarantees that the panels retain a minimum percentage of their rated STC output over a quarter century. These terms are solid for commercial and prosumer-grade installations and are typical of reputable N-type module manufacturers. ### What does N-type cell technology in the LPEPV 60 SUPERIOR actually mean for performance? N-type cells use phosphorus-doped silicon instead of boron, which makes them inherently resistant to LID (light-induced degradation). As a result, the LPEPV 60 SUPERIOR loses significantly less power in its first years of operation compared to conventional P-type or PERC modules. This translates to higher initial efficiency, lower annual degradation, and more predictable LCOE over the system's lifetime. ### Is the glass-glass design of the LPEPV 60 SUPERIOR better than a standard backsheet module? Yes. Replacing the polymer backsheet with a second glass layer significantly improves the module's resistance to moisture ingress, thermal cycling, and mechanical stress. The glass-glass structure reduces the risk of cell microcracking and delamination under heavy snow loads or hail. For installations in demanding climates or with high mechanical load ratings, this design offers a clear durability advantage over standard backsheet modules. ### The LPEPV 60 SUPERIOR is rated at 285 Wp - is that enough for a single-family home? A single-family home consuming 3,500-5,000 kWh per year typically requires 10 to 16 panels at 285 Wp each, giving a system size of roughly 2.85-4.56 kWp. While that is technically achievable, modern modules now exceed 400-600 Wp, meaning fewer panels are needed for the same output. The SUPERIOR series is best suited for smaller rooftops or as part of an existing installation where space, not power density, drives the design. ### How does the LPEPV 60 SUPERIOR perform in low-light or overcast conditions? The N-type cell architecture and optimized electrical layout give the LPEPV 60 SUPERIOR better low-irradiance performance than older polycrystalline or P-type PERC modules. In diffuse-light conditions, the modules maintain a higher conversion efficiency, which is especially valuable in northern European climates where direct irradiance hours are limited and a significant share of annual yield comes from overcast days. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/11-75e5c010ee98.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [Canadian Solar CS3K-330P](https://comparepv.com/panel/canadian-solar-cs3k-330p) | 330 W | +45 W, cooler, +2.4 pp | | [Canadian Solar CS3K-335MB-AG](https://comparepv.com/panel/canadian-solar-cs3k-335mb-ag) | 335 W | +50 W, +2.4 pp, +5 yr warranty | | [SunLink LNSK-335M](https://comparepv.com/panel/sunlink-lnsk-335m) | 335 W | +50 W, cooler, +2.3 pp | | [Canadian Solar CS3K-325P](https://comparepv.com/panel/canadian-solar-cs3k-325p) | 325 W | +40 W, cooler, +2.1 pp | | [SunLink LNSK-330M](https://comparepv.com/panel/sunlink-lnsk-330m) | 330 W | +45 W, cooler, +2.0 pp | | [Canadian Solar CS3K-320P](https://comparepv.com/panel/canadian-solar-cs3k-320p) | 320 W | +35 W, cooler, +1.8 pp | | [SunLink LNSK-325M](https://comparepv.com/panel/sunlink-lnsk-325m) | 325 W | +40 W, cooler, +1.7 pp | | [Lina Energy LPEPV 280](https://comparepv.com/panel/lina-energy-lpepv-280) | 280 W | -0.3 pp | | [Maxeon SPR-MAX3-400-COM](https://comparepv.com/panel/maxeon-spr-max3-400-com) | 400 W | Cooler, +5.1 pp, +15 yr warranty | | [Lina Energy LEPV 400](https://comparepv.com/panel/lina-energy-lepv-400) | 400 W | +115 W, cooler, +4.8 pp | | [Phono Solar NS-360MH-60](https://comparepv.com/panel/phono-solar-ns-360mh-60) | 360 W | +75 W, cooler, +4.6 pp | | [PolyCrown Solar Tech NS-360MH-60](https://comparepv.com/panel/polycrown-solar-tech-ns-360mh-60) | 360 W | +75 W, cooler, +4.6 pp | | [Maxeon SPR-MAX3-390-COM](https://comparepv.com/panel/maxeon-spr-max3-390-com) | 390 W | Cooler, +4.6 pp, +15 yr warranty | | [Meyer Burger MB\_TG120ByB\_390](https://comparepv.com/panel/meyer-burger-mb-tg120byb-390) | 390 W | +105 W, cooler, +4.3 pp | | [Panasonic EVPV380](https://comparepv.com/panel/panasonic-evpv380) | 380 W | +95 W, cooler, +4.2 pp | | [LG LG375Q1C-V5](https://comparepv.com/panel/lg-lg375q1c-v5) | 375 W | +90 W, cooler, +4.2 pp | --- Source: https://comparepv.com/panel/lina-energy-lpepv-285 Not in this file, on the page: a thirty-year output simulator and alternatives filtered by how closely they match these dimensions.