--- title: "Jinko Solar JKM580N-72HL4-BDV 580W Solar Panel - Specs & Review | ComparePV" description: "Jinko Solar JKM580N-72HL4-BDV 580W solar panel. Specs: 22.45% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/jinko-solar-jkm580n-72hl4-bdv" updated: 2026-09-11 --- # Jinko Solar JKM580N-72HL4-BDV Middle of its segment, weak in heat 260 panels in the segment N-type 550-600 W ## Identity - **Manufacturer:** Jinko Solar - **Model:** JKM580N-72HL4-BDV - **Series:** Tiger Neo N-type 72HL4-BDV - **Rated power:** 580 W - **Cell technology:** N-type - **Bifacial:** yes ## How it compares Compared against segment N-type 550-600 W (260 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 580 W | 580 W | Typical | | | Module efficiency | 22.45% | 22.45% | Typical | 4,620 | | Power density | 224.5 | 224.5 | Typical | 4,547 | | Temperature coefficient | -0.300 | -0.290 | Weak - bottom 17% | 6,093 | | Weight (kg) | 32.0 kg | 29.5 kg | Weak - bottom 22% | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 22.45% | 22.45% | Typical | 4,620 | | Power density | 224.5 | 224.5 | Typical | 4,547 | | Temperature coefficient | -0.300 | -0.290 | Weak - bottom 17% | 6,093 | | Weight per kWp | 55.2 | 52.3 | Weak - bottom 22% | 9,588 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Watch out for - **-0.300 %/°C temperature coefficient** - Bottom 17% of the N-type 550-600 W segment, against a median of -0.290. - **55.2 kg per kWp** - Bottom 22% of the N-type 550-600 W segment, against a median of 52.3. - **Best for:** Commercial and utility-scale. - **Not ideal for:** Hot climates and weight-limited structures. ## Specification ### Electrical - **Rated power (Pmax):** 580 W - **Efficiency:** 22.45 % - **Voltage at Pmax (Vmp):** 42.59 V - **Current at Pmax (Imp):** 13.62 A - **Open-circuit voltage (Voc):** 51.47 V - **Short-circuit current (Isc):** 14.37 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.300 %/degC - **Temperature coefficient of Voc:** -0.250 %/degC - **Temperature coefficient of Isc:** 0.046 %/degC - **NOCT:** 45 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** N-type - **Cell count:** 144 - **Bifacial:** yes - **Bifacial gain:** 25.00 ### Physical - **Length:** 2278 mm - **Width:** 1134 mm - **Thickness:** 30 mm - **Weight:** 32.0 kg - **Area:** 2.58 m2 - **Power density:** 224.5 Wp/m2 ### Warranty and degradation - **Product warranty:** 12 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 87.4 % - **First-year degradation:** 1.00 % - **Annual degradation:** 0.40 % - **Output after 30 years:** 507 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 4620 of 14005 | | Power density | 4547 of 14005 | | Temperature coefficient | 6093 of 14005 | | Weight | 9588 of 14005 | | Warranty | 21 of 14005 | ## Pros - **N-type TOPCon cells** - N-type TOPCon technology delivers lower light-induced degradation (LID) and better high-temperature performance than legacy PERC cells, resulting in more stable annual energy yield, especially during summer months. - **Bifacial glass-glass design** - The glass-glass bifacial construction captures light reflected from the ground, generating additional energy yield (typically a few to over ten percent depending on albedo) without increasing installation footprint - a key advantage for ground-mount and flat, light-colored rooftop installations. - **30-year linear power warranty** - The manufacturer guarantees at least 87.4% of rated power after 30 years, matching the current premium standard for N-type TOPCon modules (LONGi, JA Solar, Trina Vertex S+) and clearly outperforming older PERC modules with 25-year power warranties. - **Tier-1 manufacturer per BNEF** - JinkoSolar is listed on BloombergNEF's Tier 1 list as of Q1 2026, confirming bankability and easing non-recourse project financing through commercial banks. - **High mechanical durability** - The dual-glass construction with half-cut cells reduces microcrack risk and improves load resistance, rated up to 5400 Pa snow load and 2400 Pa wind load, enhancing durability in demanding climates. ## Cons - **Shorter product warranty than some peers** - The 12-year product warranty is lower than the 15-year terms offered in this segment by e.g. Astronergy or LONGi Hi-MO6, while some N-type TOPCon leaders (Trina Vertex S+, JA Deep Blue) now offer 25-year product warranties as standard. - **Efficiency in line with peers, no clear edge** - The 22.45% peak efficiency matches Emmvee's Titanium Duo/Clear and is nearly identical to ZNShine's ZXM7-UHLD144 (22.44%) - the series does not stand out electrically among direct competitors at the comparable 580 Wp power class. ## About this series The Tiger Neo N-type 72HL4-BDV series is a bifacial photovoltaic module built in a glass-glass configuration, engineered to maximize energy yield from every available square meter of an installation. The use of **N-type TOPCon cells** significantly reduces light- and temperature-induced degradation, allowing the panel to maintain high performance throughout its entire service life, even under demanding irradiance conditions. A key advantage of this series is its **bifacial technology**, which captures light reflected off the ground surface to generate additional energy gain without increasing the installation footprint - a solution particularly valued in ground-mount systems and flat roofs with light-colored surfaces. The **dual glass construction** provides substantially greater mechanical resistance and durability compared to traditional backsheet modules, translating into lower risk of microcracks and a longer operational lifespan under variable weather conditions. The panel is built on a **half-cut cell** layout, which reduces resistive losses and improves resilience against partial shading. The 72HL4-BDV series is well suited for both commercial installations and larger prosumer systems, where a low levelized cost of energy (LCOE) and predictable, stable long-term power output are essential. ## Notable figures - At 22.4% efficiency, this panel is on par with typical \*\*N-type 550-600W\*\* modules - At 224.5 W/m² power density, roof space requirements are typical for \*\*N-type 550-600W\*\* panels - Temperature coefficient of -0.30%/°C matches the \*\*N-type 550-600W\*\* median - At 32.0 kg, this panel is 2.5 kg heavier than the \*\*N-type 550-600W\*\* median (29.5 kg) - more demanding for installation crews - Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof ## Questions ### What is N-type TOPCon technology in the Jinko Tiger Neo 72HL4-BDV panels and how does it differ from classic P-type cells? TOPCon (Tunnel Oxide Passivated Contact) is an N-type cell technology where an additional passivation layer reduces electron recombination at the cell surface. In practice this means higher efficiency (around 22.45%), lower light-induced degradation (LID) and thermal-induced degradation (LeTID), and better performance at high temperatures compared to traditional P-type PERC cells. As a result, the panel maintains high energy output for longer. ### How much extra energy does the bifacial design of the Tiger Neo 72HL4-BDV panel generate? Thanks to the glass-glass construction, the rear side of the module also generates current using light reflected from the surrounding surface. Depending on the ground albedo (e.g., light gravel or a white roof membrane), the additional energy gain can range from a few to over ten percent compared to a monofacial module. The effect is strongest in ground-mount installations and flat roofs with light coverings, and smaller near a dark pitched roof surface. ### What warranty comes with the Jinko Tiger Neo N-type 72HL4-BDV panels? The manufacturer provides a 12-year product warranty covering material and manufacturing defects, plus a 30-year linear power output warranty. This means predictable, guaranteed power degradation over time, making it easier to estimate the return on investment when planning a commercial or residential prosumer installation over the long term. ### Is the 580 Wp panel from the 72HL4-BDV series suitable for a single-family house pitched roof? Yes, though due to the 72-cell format (dimensions around 2278x1134 mm) and a weight close to 32-33 kg resulting from the glass-glass construction, the panel is heavier than standard backsheet modules. Installation requires a mounting structure rated for the additional load, but the module itself works well on pitched roofs, though the bifacial gain will be limited by the proximity of a dark roof surface. ### Is the glass-glass construction more resistant to microcracks than standard backsheet panels? Yes. Replacing the rear backsheet with a second tempered glass layer significantly increases the module's mechanical rigidity and resistance to snow and wind loads, while reducing the risk of cell microcracks and laminate degradation from moisture. The dual-glass construction also improves module sealing, resulting in longer, more stable performance under harsh weather conditions. ### How do half-cut cells in the Tiger Neo 72HL4-BDV panel affect performance under partial shading? Splitting cells into halves reduces resistive losses and divides the panel into independent electrical sections. When part of the module is shaded, for example by a chimney, branch, or dirt buildup, the rest of the panel keeps operating efficiently, and the overall power drop is smaller than in panels with full-size cells. This is a real advantage for roofs that experience partial shading during the day. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/JKM560-580N-72HL4-BDV-F3-EN-be728f856b00.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [Longi Solar LR7-60HVH-560M](https://comparepv.com/panel/longi-lr7-60hvh-560m) | 560 W | Cooler, lighter, +2.4 pp | | [Longi Solar LR7-60HVH-555M](https://comparepv.com/panel/longi-lr7-60hvh-555m) | 555 W | Cooler, lighter, +2.2 pp | | [AIKO AIKO-A630-MAH72Dw](https://comparepv.com/panel/aiko-aiko-a630-mah72dw) | 630 W | +50 W, cooler, +1.9 pp | | [Longi Solar LR7-60HVHL-550M](https://comparepv.com/panel/longi-lr7-60hvhl-550m) | 550 W | Cooler, 16 kg lighter, +1.9 pp | | [JA Solar JAT60S40-540/LR](https://comparepv.com/panel/ja-solar-jat60s40-540-lr) | 540 W | -40 W, lighter, +1.9 pp | | [Jinko Solar JKM525M-72HL4-TV](https://comparepv.com/panel/jinko-solar-jkm525m-72hl4-tv) | 525 W | -55 W, hotter, -2.1 pp | | [Jinko Solar JS182MHC144-525](https://comparepv.com/panel/jinko-solar-js182mhc144-525) | 525 W | -55 W, lighter, -2.1 pp | | [Jinko Solar JKM530M-72HL4-TV](https://comparepv.com/panel/jinko-solar-jkm530m-72hl4-tv) | 530 W | -50 W, hotter, -1.9 pp | | [Jinko Solar JS182MHC144-530](https://comparepv.com/panel/jinko-solar-js182mhc144-530) | 530 W | -50 W, lighter, -1.9 pp | | [Jinko Solar JKM535M-72HL4-(V)-F3-EN](https://comparepv.com/panel/jinko-solar-jkm535m-72hl4-v-f3-en) | 535 W | Hotter, -1.7 pp, -5 yr warranty | | [Jinko Solar JKM535M-72HL4-BDVP](https://comparepv.com/panel/jinko-solar-jkm535m-72hl4-bdvp) | 535 W | -45 W, hotter, -1.7 pp | | [AIKO AIKO-A650-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a650-mae72mw) | 650 W | +70 W, lighter, +2.8 pp | | [AIKO AIKO-A645-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a645-mae72mw) | 645 W | +65 W, lighter, +2.6 pp | | [AIKO AIKO-A640-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a640-mae72mw) | 640 W | +60 W, lighter, +2.4 pp | | [AIKO AIKO-A635-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a635-mae72mw) | 635 W | +55 W, lighter, +2.2 pp | --- Source: https://comparepv.com/panel/jinko-solar-jkm580n-72hl4-bdv Not in this file, on the page: a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.