--- title: "Jinko Solar JKM575N-72HL4-BDX Solar Panel: Specs & Datasheet | ComparePV" description: "Jinko Solar JKM575N-72HL4-BDX solar panel. Specs: 22.26% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/jinko-solar-jkm575n-72hl4-bdx" image: "https://comparepv.com/og/panel/jinko-solar-jkm575n-72hl4-bdx.png" updated: 2026-09-11 --- # Jinko Solar JKM575N-72HL4-BDX Middle of its segment, heavy for its output 1,022 panels in the segment TOPCon 550-600 W ## Identity - **Manufacturer:** Jinko Solar - **Model:** JKM575N-72HL4-BDX - **Series:** Tiger Neo 72HL4-BDX (EU datasheet EU-JKM575-600N-72HL4-BDX-F4-EN) - **Rated power:** 575 W - **Cell technology:** TOPCon - **Bifacial:** yes ## How it compares Compared against segment TOPCon 550-600 W (1022 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 575 W | 580 W | Typical | | | Module efficiency | 22.26% | 22.44% | Typical | 5,656 | | Power density | 222.6 | 224.4 | Typical | 5,612 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,220 | | Weight (kg) | 37.7 kg | 31.2 kg | Weak - bottom 1% | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 22.26% | 22.44% | Typical | 5,656 | | Power density | 222.6 | 224.4 | Typical | 5,612 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,220 | | Weight per kWp | 65.6 | 53.8 | Weak - bottom 1% | 13,202 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Watch out for - **65.6 kg per kWp** - Bottom 1% of the TOPCon 550-600 W segment, against a median of 53.8. Ranked 13,202nd in the whole database. - **Best for:** Utility-scale, commercial, floating, hot-climate and cold-climate. - **Not ideal for:** Weight-limited structures. ## Specification ### Electrical - **Rated power (Pmax):** 575 W - **Efficiency:** 22.26 % - **Voltage at Pmax (Vmp):** 43.73 V - **Current at Pmax (Imp):** 13.15 A - **Open-circuit voltage (Voc):** 52.30 V - **Short-circuit current (Isc):** 13.89 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.290 %/degC - **Temperature coefficient of Voc:** -0.250 %/degC - **Temperature coefficient of Isc:** 0.045 %/degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** TOPCon - **Cell count:** 144 - **Bifacial:** yes ### Physical - **Length:** 2278 mm - **Width:** 1134 mm - **Thickness:** 30 mm - **Weight:** 37.7 kg - **Area:** 2.58 m2 - **Power density:** 222.6 Wp/m2 ### Warranty and degradation - **Product warranty:** 12 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 87.4 % - **First-year degradation:** 1.00 % - **Annual degradation:** 0.40 % - **Output after 30 years:** 503 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 5656 of 14129 | | Power density | 5612 of 14129 | | Temperature coefficient | 2220 of 14129 | | Weight | 13202 of 14129 | | Warranty | 21 of 14129 | ## Pros - **N-type TOPCon: low annual degradation** - N-type TOPCon cells deliver ≤0.4%/year degradation (vs ~0.7%/year for P-type PERC) and only 1% first-year LID power loss. After 30 years the module retains ≥87.4% of rated power, directly lowering LCOE in utility-scale and commercial projects. - **30-year linear power warranty** - A 30-year linear warranty with ≤0.4%/year degradation exceeds most peer comparables, where mid-tier models typically stop at 25 years with ~84.8% end-of-warranty power. This improves project bankability and reduces lender risk. - **Bifacial glass-glass with SMBB** - The glass-glass construction with ~85% bifaciality (mass-production typical for Tiger Neo) enables 5-15% additional energy yield from reflected albedo in ground-mount and floating PV installations. SMBB (Multi-Busbar) technology reduces current path resistance and mitigates micro-shading impact, while the dual-glass encapsulation withstands snow loads of 5,400 Pa and wind loads of 2,400 Pa. - **Jinko: #1 BNEF bankability, PVEL Top Performer** - JinkoSolar is the only module manufacturer rated bankable by 100% of Bloomberg BNEF survey participants (2025) - for the 10th consecutive year. The Tiger Neo series has held PVEL Top Performer status for 11 consecutive years (2015-2025), reducing credit risk and simplifying due diligence in project-financed deals. - **Strong PID and LeTID resistance** - N-type cell architecture inherently suppresses PID (Potential-Induced Degradation) and exhibits very low LeTID (Light and elevated Temperature Induced Degradation) compared to P-type PERC, which is especially relevant in high system-voltage (up to 1,500 V DC) and high-temperature environments. ## Cons - **Lowest efficiency among peer comparables** - At 22.26% module efficiency, this series ranks last among the listed peer comparables: Sunpro Power 210R TOPCon Bifacial reaches 23.35% (+1.09 pp), VSUN 75N-144BMH-DG - 22.70% (+0.44 pp), Luxor ECO LINE N-TYPE - 22.51% (+0.25 pp). In large-scale installations, lower efficiency translates into greater land area or a higher module count to achieve the same peak power output. - **~28 kg glass-glass weight vs. glass-backsheet** - The dual-glass encapsulation increases module weight to ~28 kg, while comparable-wattage glass-backsheet modules typically weigh 22-24 kg. On existing rooftop installations this may require structural assessment and reinforced racking, adding BoS costs. ## About this series The Jinko Solar Tiger Neo 72HL4-BDX (JKM575-600N) series is designed for maximizing yield in large-scale installations - where every percentage point of energy and long-term operational stability matter. The application of **N-type TOPCon cells** minimizes typical start-up losses and helps maintain high efficiency over the long term, while **Hot 2.0 technology** enhances module reliability under elevated temperatures and reduced irradiance conditions. What truly distinguishes the BDX version is its **bifacial glass-glass construction** - the panel can also utilize light reflected from the substrate, resulting in higher yields, especially on light-colored surfaces, ground-mounted farms, and floating installations. Additionally, **SMBB** improves current collection and reduces the impact of microshadowing, and **high PID resistance** enhances operational safety in demanding grid environments. This makes it an excellent choice for investors seeking low LCOE, predictable production, and long-term reliability in commercial and utility-scale projects. ## Notable figures - Efficiency of 22.3% matches the \*\*TOPCon 550-600W\*\* median - At 222.6 W/m² power density, roof space requirements are typical for \*\*TOPCon 550-600W\*\* panels - Temperature coefficient of -0.29%/°C matches the \*\*TOPCon 550-600W\*\* median - Weight of 37.7 kg is 6.5 kg above \*\*TOPCon 550-600W\*\* median (31.2 kg) - verify structural support - 80% bifaciality enables rear-side power generation, boosting yield by 4-12% on reflective surfaces ## Questions ### What is the efficiency of the Jinko Solar Tiger Neo 72HL4-BDX and is TOPCon technology worth the investment? The Tiger Neo 72HL4-BDX series reaches module efficiency of up to 23.23%, placing it among the top-performing commercial panels available. N-type TOPCon cells exhibit significantly lower LID/LeTID losses compared to standard PERC cells, meaning less power degradation in the first months of operation and a higher yield over the system's lifetime. For large-scale installations, the difference in LCOE is clearly measurable. ### How much additional energy can be gained from the bifacial design of the Jinko Tiger Neo 72HL4-BDX? The bifacial glass-glass construction allows the rear side of the module to harvest light reflected from the ground surface. Depending on surface albedo, rear-side gain typically ranges from 10-20%, and can reach up to 30% on highly reflective surfaces such as gravel, snow, or light-colored concrete. The greatest benefits are seen in ground-mounted systems, agrivoltaic projects, and floating solar installations, where reflected light reaches the rear of the module without obstruction. ### What warranty does Jinko Solar offer on the Tiger Neo 72HL4-BDX series? Jinko Solar provides a 12-year product warranty covering material and workmanship defects, plus a 30-year linear power warranty. First-year power degradation is capped at 1%, with a maximum annual degradation of 0.4% in subsequent years. After 30 years, the module is warranted to retain at least 87.4% of its nominal power output. As a Tier 1 manufacturer, Jinko Solar's long-term warranty commitments carry a higher level of credibility. ### How does the Jinko Tiger Neo 72HL4-BDX perform in high temperatures and low-light conditions? The BDX series has a temperature coefficient of -0.29%/°C, which is better than typical PERC modules at -0.35%/°C, resulting in lower power losses on hot days. The Hot 2.0 technology further improves electrical reliability under elevated operating temperatures. N-type TOPCon cells also maintain superior efficiency under diffuse light, which is relevant on overcast days and during early morning or late afternoon hours. ### Is the Jinko Solar Tiger Neo 72HL4-BDX series suitable for residential rooftop installation? The 72-cell modules with power output starting at 575 W and weighing approximately 32-33 kg are designed primarily for commercial and utility-scale installations. While technically feasible on a residential roof, the large dimensions and weight can complicate transport and mounting, and most residential inverters are not optimized for such high single-module power ratings. For home installations, a smaller 60-cell Jinko series module is generally a better fit. ### What does SMBB technology mean in the Jinko Tiger Neo 72HL4-BDX and does it affect performance? SMBB, or Super Multi-Busbar, replaces a few wide busbars with a much larger number of thin conductors that collect current across each cell. This shortens the electron path to the conductor, reducing internal resistance and improving current collection under partial shading conditions. In practice, it results in higher yield when parts of the module are shaded, and limits the impact of localized cell damage on the overall module output. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/eu-jkm575-600n-72hl4-bdx-f4-en-7ef5347688bc.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [Longi Solar LR7-60HVH-560M](https://comparepv.com/panel/longi-lr7-60hvh-560m) | 560 W | Cooler, lighter, +2.5 pp | | [Longi Solar LR7-60HVH-555M](https://comparepv.com/panel/longi-lr7-60hvh-555m) | 555 W | Cooler, lighter, +2.3 pp | | [Longi Solar LR7-60HVHL-550M](https://comparepv.com/panel/longi-lr7-60hvhl-550m) | 550 W | Cooler, 21 kg lighter, +2.1 pp | | [JA Solar JAT60S40-540/LR](https://comparepv.com/panel/ja-solar-jat60s40-540-lr) | 540 W | -35 W, lighter, +2.1 pp | | [Gokin GK-5-60HG-540M](https://comparepv.com/panel/gokin-gk-5-60hg-540m) | 540 W | -35 W, lighter, +2.1 pp | | [Jinko Solar JKM545-54QL6-DV-F1-EU](https://comparepv.com/panel/jinko-solar-jkm545-54ql6-dv-f1-eu) | 545 W | -30 W, lighter, +2.0 pp | | [AIKO AIKO-A625-MAH72Dw](https://comparepv.com/panel/aiko-aiko-a625-mah72dw) | 625 W | +50 W, lighter, +1.9 pp | | [Jinko Solar JKM525M-72HL4-TV](https://comparepv.com/panel/jinko-solar-jkm525m-72hl4-tv) | 525 W | Hotter, lighter, -1.9 pp | | [Jinko Solar JS182MHC144-525](https://comparepv.com/panel/jinko-solar-js182mhc144-525) | 525 W | Hotter, lighter, -2.0 pp | | [Jinko Solar JKM530M-72HL4-TV](https://comparepv.com/panel/jinko-solar-jkm530m-72hl4-tv) | 530 W | Hotter, lighter, -1.7 pp | | [Jinko Solar JS182MHC144-530](https://comparepv.com/panel/jinko-solar-js182mhc144-530) | 530 W | Hotter, lighter, -1.8 pp | | [Jinko Solar JKM535M-72HL4-(V)-F3-EN](https://comparepv.com/panel/jinko-solar-jkm535m-72hl4-v-f3-en) | 535 W | Hotter, lighter, -1.6 pp | | [Jinko Solar JKM535M-72HL4-BDVP](https://comparepv.com/panel/jinko-solar-jkm535m-72hl4-bdvp) | 535 W | -40 W, hotter, -1.5 pp | | [AIKO AIKO-A650-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a650-mae72mw) | 650 W | +75 W, lighter, +2.9 pp | | [AIKO AIKO-A645-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a645-mae72mw) | 645 W | +70 W, lighter, +2.7 pp | | [AIKO AIKO-A640-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a640-mae72mw) | 640 W | +65 W, lighter, +2.5 pp | --- Source: https://comparepv.com/panel/jinko-solar-jkm575n-72hl4-bdx Not in this file, on the page: a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.