--- title: "Jinko Solar EU-JKM425-450N-54HL4R-BDB-G4 (445W class) Solar Panel: Specs & Datasheet | ComparePV" description: "Jinko Solar EU-JKM425-450N-54HL4R-BDB-G4 (445W class) solar panel. Specs: 22.27% efficiency, Monocrystalline cells." source: "https://comparepv.com/panel/jinko-solar-eu-jkm425-450n-54hl4r-bdb-g4-445w-class" image: "https://comparepv.com/og/panel/jinko-solar-eu-jkm425-450n-54hl4r-bdb-g4-445w-class.png" updated: 2026-09-11 --- # Jinko Solar EU-JKM425-450N-54HL4R-BDB-G4 (445W class) Solid all-round for its segment 1,220 panels in the segment TOPCon 400-450 W ## Identity - **Manufacturer:** Jinko Solar - **Model:** EU-JKM425-450N-54HL4R-BDB-G4 (445W class) - **Series:** 54HL4R-BDB (NeoGreen) - **Rated power:** 445 W - **Cell technology:** TOPCon - **Bifacial:** yes ## How it compares Compared against segment TOPCon 400-450 W (1220 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 445 W | 435 W | Strong - top 8% | | | Module efficiency | 22.27% | 22.00% | Typical | 5,544 | | Power density | 222.7 | 220.2 | Typical | 5,365 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,220 | | Weight (kg) | 24.5 kg | 22.0 kg | Typical | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 22.27% | 22.00% | Typical | 5,544 | | Power density | 222.7 | 220.2 | Typical | 5,365 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,220 | | Weight per kWp | 55.1 | 51.5 | Typical | 9,519 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | - **Best for:** Residential and commercial. ## Specification ### Electrical - **Rated power (Pmax):** 445 W - **Efficiency:** 22.27 % - **Voltage at Pmax (Vmp):** 33.61 V - **Current at Pmax (Imp):** 13.24 A - **Open-circuit voltage (Voc):** 40.03 V - **Short-circuit current (Isc):** 14.05 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.290 %/degC - **Temperature coefficient of Voc:** -0.250 %/degC - **Temperature coefficient of Isc:** 0.045 %/degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** TOPCon - **Cell count:** 108 - **Bifacial:** yes ### Physical - **Length:** 1762 mm - **Width:** 1134 mm - **Thickness:** 30 mm - **Weight:** 24.5 kg - **Area:** 2.00 m2 - **Power density:** 222.7 Wp/m2 ### Warranty and degradation - **Product warranty:** 25 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 87.4 % - **First-year degradation:** 1.00 % - **Annual degradation:** 0.40 % - **Output after 30 years:** 389 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 5544 of 14129 | | Power density | 5365 of 14129 | | Temperature coefficient | 2220 of 14129 | | Weight | 9519 of 14129 | | Warranty | 21 of 14129 | ## About this series The Jinko Solar 54HL4R-BDB (NeoGreen) series was designed with investors in mind who wish to combine the all-black aesthetic with tangible energy gains. These are **bifacial dual glass modules**, capable of harnessing not only light falling on the front but also the reflection from the rear substrate - effectively boosting yield without increasing rooftop surface area. At the heart of this series are **N-type TOPCon cells** supported by the manufacturer's proprietary **HOT 3.0** solutions, translating to improved operational stability, reduced degradation-related losses, and higher efficiency under suboptimal lighting conditions. NeoGreen also stands out for its approach to quality and repeatability - modules from this line are associated with **zero-carbon certified factories**, which is significant for companies reporting ESG metrics. This makes it an excellent choice for residential and commercial rooftops, carports, and installations where aesthetics, durability, and predictable yield matter. ## Notable figures - At 22.3% efficiency, this panel is on par with typical \*\*TOPCon 400-450W\*\* modules - At 222.7 W/m² power density, roof space requirements are typical for \*\*TOPCon 400-450W\*\* panels - Temperature coefficient of -0.29%/°C matches the \*\*TOPCon 400-450W\*\* median - At 24.5 kg, this panel is 2.5 kg heavier than the \*\*TOPCon 400-450W\*\* median (22.0 kg) - more demanding for installation crews - Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof ## Questions ### What is the HOT 3.0 technology in the Jinko Solar NeoGreen 54HL4R-BDB panels and is it worth the premium? HOT 3.0 is Jinko Solar's proprietary optimization layer built on top of N-type TOPCon cells. It delivers a lower annual degradation rate, better output at elevated cell temperatures, and higher energy yield under partial shading or overcast sky conditions. For system owners, this means more predictable generation over the full 30-year power warranty period, directly improving the LCOE of the installation. ### What warranties does the Jinko Solar NeoGreen 54HL4R-BDB series carry? The NeoGreen 54HL4R-BDB includes a 25-year product warranty covering manufacturing defects and workmanship, plus a 30-year linear power warranty guaranteeing at least 87.4% of rated output after three decades of operation. The extended power warranty is among the longest in the residential and commercial PV segment and is a key input when calculating system LCOE. ### Does the bifacial design of the NeoGreen 54HL4R-BDB make sense on a standard pitched roof with dark tiles? On a pitched roof with dark-colored tiles, rear-side irradiance is limited, so bifacial gain typically stays in the 3-8% range. However, the dual-glass construction independently improves moisture resistance and mechanical durability regardless of bifacial performance. Maximum bifacial benefit is realized in carport or elevated ground-mount applications over light-colored surfaces. ### What is the peak power output of the NeoGreen 54HL4R-BDB series, and can it fit on a small roof? The top variant reaches 450 Wp within a compact 1762×1134 mm footprint. N-type TOPCon cells push module efficiency to approximately 22-23%, meaning a higher total system wattage can be fitted into the same roof area compared to older PERC-based modules. This makes the series especially practical when available roof space is limited. ### Are the Jinko Solar NeoGreen 54HL4R-BDB panels suitable for a carport or pergola structure? Yes - the dual-glass construction and bifacial cell architecture make the NeoGreen 54HL4R-BDB a strong fit for carport and canopy applications. The glass back sheet delivers a clean all-black aesthetic, while light reflected from a pale parking surface contributes measurable rear-side generation. Note that glass-glass modules are slightly heavier than glass-backsheet alternatives, so structural load capacity should be verified during design. ### Is Jinko Solar a reliable manufacturer and is the NeoGreen series available outside China? Jinko Solar is consistently rated as a Tier 1 manufacturer by BloombergNEF and has a long track record of supplying European markets. The 54HL4R-BDB (NeoGreen) series is actively distributed through European and Polish PV wholesale channels. Jinko Solar also operates zero-carbon certified factories, which is relevant for corporate buyers tracking Scope 3 emissions as part of ESG reporting. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/1827613081681d7c50a4db2-393efd35f659.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [AIKO AIKO-A495-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a495-mce54mw) | 495 W | +50 W, lighter, +2.5 pp | | [AIKO AIKO-A490-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a490-mce54mw) | 490 W | +45 W, lighter, +2.2 pp | | [Suntech STP-NT11/48QGSF-490](https://comparepv.com/panel/suntech-stp-nt11-48qgsf-490) | 490 W | +45 W, lighter, +2.2 pp | | [JA Solar JAT54S40-485/LR](https://comparepv.com/panel/ja-solar-jat54s40-485-lr) | 485 W | +40 W, lighter, +2.0 pp | | [AIKO AIKO-A485-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a485-mce54mw) | 485 W | +40 W, lighter, +2.0 pp | | [Longi Solar LR7-54HJD-495M](https://comparepv.com/panel/longi-lr7-54hjd-495m) | 495 W | +50 W, cooler, +2.0 pp | | [AIKO AIKO-A485-MAH54Mw](https://comparepv.com/panel/aiko-aiko-a485-mah54mw) | 485 W | +40 W, lighter, +2.0 pp | | [Jinko Solar JKM420N-54HL4R-BDV](https://comparepv.com/panel/jinko-solar-jkm420n-54hl4r-bdv) | 420 W | -25 W, lighter, -1.2 pp | | [Jinko Solar EU-JKM425-450N-54HL4R-BDB-G4 (425W class)](https://comparepv.com/panel/jinko-solar-eu-jkm425-450n-54hl4r-bdb-g4-425w-class) | 425 W | -20 W, -1.0 pp | | [Jinko Solar JKM430-455N-54HL4R-B-F8-EN (430W)](https://comparepv.com/panel/jinko-solar-co-ltd-jkm430-455n-54hl4r-b-f8-en-430w) | 430 W | -15 W, lighter, -0.8 pp | | [Longi Solar LR7-54HJD-510M](https://comparepv.com/panel/longi-lr7-54hjd-510m) | 510 W | +65 W, cooler, +2.7 pp | | [Longi Solar LR7-54HJD-505M](https://comparepv.com/panel/longi-lr7-54hjd-505m) | 505 W | +60 W, cooler, +2.4 pp | | [WINAICO WST-505BKX54-A2](https://comparepv.com/panel/winaico-wst-505bkx54-a2) | 505 W | +60 W, cooler, +2.4 pp | | [Longi Solar LR7-54HJD-500M](https://comparepv.com/panel/longi-lr7-54hjd-500m) | 500 W | +55 W, cooler, +2.2 pp | | [Talesun CIPRO-TN9C54M-500W](https://comparepv.com/panel/talesun-cipro-tn9c54m-500w) | 500 W | +55 W, lighter, +2.2 pp | --- Source: https://comparepv.com/panel/jinko-solar-eu-jkm425-450n-54hl4r-bdb-g4-445w-class Not in this file, on the page: the I-V and temperature curves lifted from the manufacturer's datasheet, a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.