--- title: "JA Solar NS-430MH-108 Solar Panel: Specs & Datasheet | ComparePV" description: "JA Solar NS-430MH-108 solar panel. Specs: 21.52% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/ja-solar-ns-430mh-108" image: "https://comparepv.com/og/panel/ja-solar-ns-430mh-108.png" updated: 2026-09-11 --- # JA Solar NS-430MH-108 Middle of its segment, heavy for its output 1,220 panels in the segment TOPCon 400-450 W ## Identity - **Manufacturer:** JA Solar - **Model:** NS-430MH-108 - **Series:** Monocrystalline 144 (datasheet title) - **Rated power:** 430 W - **Cell technology:** TOPCon - **Bifacial:** yes ## How it compares Compared against segment TOPCon 400-450 W (1220 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 430 W | 435 W | Typical | | | Module efficiency | 21.52% | 22.00% | Weak - bottom 23% | 7,917 | | Power density | 215.2 | 220.2 | Weak - bottom 23% | 7,880 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,220 | | Weight (kg) | 24.5 kg | 22.0 kg | Weak - bottom 14% | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 21.52% | 22.00% | Weak - bottom 23% | 7,917 | | Power density | 215.2 | 220.2 | Weak - bottom 23% | 7,880 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,220 | | Weight per kWp | 57.0 | 51.5 | Weak - bottom 14% | 11,050 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Watch out for - **57.0 kg per kWp** - Bottom 14% of the TOPCon 400-450 W segment, against a median of 51.5. - **21.52% module efficiency** - Bottom 23% of the TOPCon 400-450 W segment, against a median of 22.00%. - **215.2 watts per square metre** - Bottom 23% of the TOPCon 400-450 W segment, against a median of 220.2. - **Best for:** Residential, commercial and shaded-installations. - **Not ideal for:** Weight-limited structures, tight roof space and roofs where every square metre has to count. ## Specification ### Electrical - **Rated power (Pmax):** 430 W - **Efficiency:** 21.52 % - **Voltage at Pmax (Vmp):** 33.14 V - **Current at Pmax (Imp):** 12.98 A - **Open-circuit voltage (Voc):** 39.53 V - **Short-circuit current (Isc):** 13.76 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.290 %/degC - **Temperature coefficient of Voc:** -0.250 %/degC - **Temperature coefficient of Isc:** 0.045 %/degC - **NOCT:** 45 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** TOPCon - **Cell count:** 108 - **Bifacial:** yes ### Physical - **Length:** 1762 mm - **Width:** 1134 mm - **Thickness:** 30 mm - **Weight:** 24.5 kg - **Area:** 2.00 m2 - **Power density:** 215.2 Wp/m2 ### Warranty and degradation - **Product warranty:** 15 years - **Performance warranty:** 30 years ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 7917 of 14129 | | Power density | 7880 of 14129 | | Temperature coefficient | 2220 of 14129 | | Weight | 11050 of 14129 | | Warranty | 21 of 14129 | ## Pros - **N-type TOPCon cell technology** - N-type TOPCon cells exhibit significantly lower light-induced degradation (LID) and a better temperature power coefficient than legacy PERC, delivering measurably higher annual energy yield - especially in summer when module temperatures routinely exceed 50°C. - **Bifacial design** - Modules harvest irradiance from both sides; on high-albedo surfaces (gravel, concrete, snow) this yields an additional 5-20% energy gain relative to a monofacial module of the same front-side nameplate power, effectively lowering the installation's LCOE. - **30-year linear power warranty** - JA Solar guarantees a linear power output for a full 30 years - longer than the 25-year standard common among peer comparables produced in 2019-2022. The extended power warranty simplifies bankability for non-recourse project financing. - **BNEF Tier 1 - fully bankable** - JA Solar has maintained BNEF Tier 1 status for over a decade and remains on the list in 2026. For debt- or lease-financed installations, this ensures lender acceptance without additional manufacturer credit enhancements. - **Up to 23.02% efficiency - top of segment** - The best variant of this series reaches 23.02% efficiency, matching the segment leader among peer comparables (SunKean SKT440~460M12-96D4: 23.02%) and outperforming Risen RSM96-11 (23.0%) and Zonergy ZPM MH3-72 (21.16%). High efficiency reduces the roof or ground area required for a given peak power target. ## Cons - **Series discontinued (2022)** - The Monocrystalline 144 line ended production in 2022 (launched 2019). New modules are available only from distributor stock; JA Solar no longer provides active technical support for this series or guarantees prompt RMA replacement of defective units. For installations planned after 2025, this complicates capacity expansion and matching of identical modules. - **Product warranty only 15 years** - The product (workmanship) warranty covers only 15 years, while JA Solar's current lineups (DeepBlue 4.0, JAM54D40) and Tier 1 competition now standardly offer 25 years. Given a 30-year installation lifetime, the 10-year warranty gap represents a tangible financial risk for the end investor. ## About this series The JA Solar Monocrystalline 144 series consists of half-cut cell modules, designed to effectively minimize energy losses under typical operating conditions. The use of a **half-cut** design improves panel performance under partial shading and reduces the risk of hot spots, leading to more stable daily energy production. Another key feature of this series is **PERC technology**, along with a multi-busbar architecture for connecting cells, which allows the modules to better capture light under cloudy conditions and in the morning and evening. Depending on the variant, you can find **bifacial** versions that can utilize reflected light from the ground - a significant advantage on bright roofs, gravel-covered ground, or carport installations. In addition, the **robust mechanical resistance** makes it easy to select panels for demanding locations, while the modern connection box and IP-rated sealing enhance safety during operation. This is a good choice for homes, businesses, and farms where predictable performance and durability are key. ## Notable figures - At 21.5% efficiency, this panel is on par with typical \*\*TOPCon 400-450W\*\* modules - 215.2 W/m² power density is 5.0 W/m² below \*\*TOPCon 400-450W\*\* median (220.2 W/m²) - requires larger installation area - At -0.29%/°C, hot weather performance is typical for \*\*TOPCon 400-450W\*\* panels - At 24.5 kg, this panel is 2.5 kg heavier than the \*\*TOPCon 400-450W\*\* median (22.0 kg) - more demanding for installation crews - #7917 for efficiency, #2220 for temperature performance out of 14129 panels ## Questions ### Is the JA Solar Monocrystalline 144 series still available for purchase? The JA Solar Monocrystalline 144 series has been discontinued and is no longer actively distributed. If you need similar specs, ask your installer or distributor about current JA Solar equivalents - newer series use the same half-cut cell architecture with comparable or improved efficiency and full warranty support. ### What warranty does the JA Solar Monocrystalline 144 series carry? JA Solar provides a 15-year product warranty covering material and workmanship defects, plus a 30-year linear power output warranty guaranteeing at least 80-87% of rated power after three decades of operation. These are strong terms for a Tier 1 manufacturer and give long-term predictability for energy yield calculations. ### What is TOPCon technology in the JA Solar Monocrystalline 144 panels, and how does it differ from PERC? TOPCon (Tunnel Oxide Passivated Contact) cells add an ultra-thin oxide layer at the rear contact to minimize carrier recombination. Compared to PERC, this delivers higher module efficiency, a lower temperature coefficient, and better high-temperature performance - a key advantage when summer module temperatures regularly exceed 50°C, reducing LCOE over the system lifetime. ### How well do JA Solar Monocrystalline 144 panels handle partial shading? Very well. The half-cut layout splits the module into two independent electrical halves, so shading one section does not shut down the entire panel. Multi busbar interconnection further reduces hot-spot risk and resistive losses. This makes the series a practical choice for rooftops affected by chimneys, dormers, or nearby trees, without requiring a per-panel MPPT optimizer in every case. ### Is the bifacial version of the JA Solar Monocrystalline 144 worth choosing for a ground-mount or carport system? Yes. For ground-mounted systems with a high-albedo surface - white gravel, concrete, or a light geotextile membrane - and for carport installations, the bifacial gain typically adds 5-15% to annual energy yield at no extra panel cost. On a sloped roof the rear side receives little reflected irradiance, so the benefit is minimal there. Maximum bifacial gain is achieved with white gravel ground cover and a tilt angle above 15°. ### What is the peak power of JA Solar Monocrystalline 144 panels, and how many modules does a home installation require? Peak output in this series reaches up to 460 Wp per module. A typical single-family home consuming around 4,000 kWh per year usually needs 8-12 panels, equating to a 4-6 kWp system. The exact count depends on roof orientation, tilt angle, geographic location, and planned additional loads such as EV charging or a home battery storage system. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/ns-420-460mh-108-1762-1134-30-bifacial-cb40200e09fe.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [AIKO AIKO-A480-MAH54Mw](https://comparepv.com/panel/aiko-aiko-a480-mah54mw) | 480 W | +50 W, lighter, +2.6 pp | | [Gokin GK-5-54HG-480M](https://comparepv.com/panel/gokin-gk-5-54hg-480m) | 480 W | +50 W, lighter, +2.6 pp | | [Jinko Solar JKM480N-48QL6-DB-F2-EU](https://comparepv.com/panel/jinko-solar-jkm480n-48ql6-db-f2-eu) | 480 W | +50 W, cooler, +2.5 pp | | [Gamko New Energy GKA96N-PRO-480W](https://comparepv.com/panel/gamko-new-energy-gka96n-pro-480w) | 480 W | +50 W, lighter, +2.5 pp | | [JA Solar NS-420MH-108](https://comparepv.com/panel/ja-solar-ns-420mh-108) | 420 W | -10 W, -0.5 pp | | [JA Solar JAM54S40-435/LR](https://comparepv.com/panel/ja-solar-jam54s40-435-lr) | 435 W | Lighter, +0.3 pp | | [JA Solar JAM54S40-440/LR](https://comparepv.com/panel/ja-solar-jam54s40-440-lr) | 440 W | +10 W, lighter, +0.5 pp | | [Longi Solar LR7-54HJD-510M](https://comparepv.com/panel/longi-lr7-54hjd-510m) | 510 W | +80 W, cooler, +3.5 pp | | [AIKO AIKO-A495-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a495-mce54mw) | 495 W | +65 W, lighter, +3.3 pp | | [Longi Solar LR7-54HJD-505M](https://comparepv.com/panel/longi-lr7-54hjd-505m) | 505 W | +75 W, cooler, +3.2 pp | | [WINAICO WST-505BKX54-A2](https://comparepv.com/panel/winaico-wst-505bkx54-a2) | 505 W | +75 W, cooler, +3.2 pp | | [AIKO AIKO-A490-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a490-mce54mw) | 490 W | +60 W, lighter, +3.0 pp | | [Longi Solar LR7-54HJD-500M](https://comparepv.com/panel/longi-lr7-54hjd-500m) | 500 W | +70 W, cooler, +3.0 pp | | [Talesun CIPRO-TN9C54M-500W](https://comparepv.com/panel/talesun-cipro-tn9c54m-500w) | 500 W | +70 W, lighter, +3.0 pp | --- Source: https://comparepv.com/panel/ja-solar-ns-430mh-108 Not in this file, on the page: the I-V and temperature curves lifted from the manufacturer's datasheet, a thirty-year output simulator and alternatives filtered by how closely they match these dimensions.