---
title: "FuturaSun FU 200 M Silk Pro Solar Panel: Specs & Datasheet | ComparePV"
description: "FuturaSun FU 200 M Silk Pro solar panel. Specs: 15.74% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient."
source: "https://comparepv.com/panel/futurasun-fu-200-m"
image: "https://comparepv.com/og/panel/futurasun-fu-200-m.png"
updated: 2026-11-06
---

# FuturaSun FU 200 M Silk Pro

Strong in heat, needs the roof space

64 panels in the segment PERC 200-250 W


## Identity

- **Manufacturer:** FuturaSun
- **Model:** FU 200 M Silk Pro
- **Series:** Silk Pro
- **Rated power:** 200 W
- **Cell technology:** PERC


## How it compares

Compared against segment PERC 200-250 W (64 panels).


| Measure | This panel | Segment median | Standing | Rank |
| --- | --- | --- | --- | --- |
| Power (Wp) | 200 W | 212 W | Weak - bottom 12% |  |
| Module efficiency | 15.74% | 16.80% | Weak - bottom 21% | 14,017 |
| Power density | 156.7 | 168.0 | Weak - bottom 19% | 14,014 |
| Temperature coefficient | -0.350 | -0.370 | Strong - top 15% | 10,660 |
| Weight (kg) | 14.0 kg | 12.8 kg | Typical |  |
| Performance warranty | 25 yrs | 25 yrs | Typical | 10,073 |


### Full peer table


| Measure | This panel | Segment median | Standing | Rank |
| --- | --- | --- | --- | --- |
| Module efficiency | 15.74% | 16.80% | Weak - bottom 21% | 14,017 |
| Power density | 156.7 | 168.0 | Weak - bottom 19% | 14,014 |
| Temperature coefficient | -0.350 | -0.370 | Strong - top 15% | 10,660 |
| Weight per kWp | 70.0 | 62.3 | Typical | 13,737 |
| Performance warranty | 25 yrs | 25 yrs | Typical | 10,073 |


### Strengths

- **-0.350 %/°C temperature coefficient** - Top 15% of the PERC 200-250 W segment, against a median of -0.370.


### Watch out for

- **156.7 watts per square metre** - Bottom 19% of the PERC 200-250 W segment, against a median of 168.0.
- **15.74% module efficiency** - Bottom 21% of the PERC 200-250 W segment, against a median of 16.80%.

- **Best for:** Residential and shaded-installations.
- **Not ideal for:** Roofs where every square metre has to count and tight roof space.


## Specification


### Electrical

- **Rated power (Pmax):** 200 W
- **Efficiency:** 15.74 %
- **Voltage at Pmax (Vmp):** 38.77 V
- **Current at Pmax (Imp):** 5.26 A
- **Open-circuit voltage (Voc):** 45.98 V
- **Short-circuit current (Isc):** 5.54 A
- **Max system voltage:** 1000 V


### Temperature

- **Temperature coefficient of Pmax:** -0.350 %/degC
- **Temperature coefficient of Voc:** -0.270 %/degC
- **Temperature coefficient of Isc:** 0.050 %/degC
- **NOCT:** 45 degC


### Cell and construction

- **Cell type:** Monocrystalline
- **Cell technology:** PERC
- **Cell count:** 68


### Physical

- **Length:** 1580 mm
- **Width:** 808 mm
- **Thickness:** 35 mm
- **Weight:** 14.0 kg
- **Area:** 1.28 m2
- **Power density:** 156.7 Wp/m2


### Warranty and degradation

- **Product warranty:** 15 years
- **Performance warranty:** 25 years
- **Output guaranteed at end of warranty:** 87.0 %
- **First-year degradation:** 3.00 %
- **Annual degradation:** 0.50 %
- **Output after 30 years:** 165 W


## Rank in the whole catalogue


| Measure | Position |
| --- | --- |
| Efficiency | 14017 of 14354 |
| Power density | 14014 of 14354 |
| Temperature coefficient | 10660 of 14354 |
| Weight | 13737 of 14354 |
| Warranty | 10073 of 14354 |


## Pros

- **Purpose-built repowering compatibility** - A module current of around 5 A allows a single damaged or stolen panel in an older array to be replaced without rebuilding the entire string or swapping the inverter - a niche capability rarely found in standard PV series.
- **Half-cut PERC M6 cells with multiple busbars** - Half-cut cell design limits power losses under partial shading, which matters when a new module is mixed into a string alongside older panels with a non-uniform performance profile.
- **25-year power warranty and 15-year product warranty** - The warranty terms (25 years on power, 15 years on product) match the standard offered by most tier-1 manufacturers, despite the series targeting a niche repair segment rather than new installations.
- **Visual consistency with existing installations** - The narrow, elongated format resembling older-generation panels, combined with a silver frame and white backsheet, avoids visible mismatches between the new module and legacy panels on the roof.
- **Quality oversight from FuturaSun's Italian HQ** - Design and quality control are managed by the Italy-based manufacturer (founded in 2008), offering more predictable after-sales support than anonymous aftermarket replacements.


## Cons

- **Discontinued production, limited availability** - This Silk Pro variant was manufactured between 2020 and 2022 and is now discontinued, meaning limited access to new units, spare parts, and long-term service support.
- **Low efficiency versus comparable 200 Wp models** - Efficiency of 14.96-15.74% is significantly lower than comparable modules rated up to 200 Wp, such as Gamko New Energy GKA182M (23%) or Isola New Energy 210M Split Cell (20.16%) - the gap reflects a design tailored to legacy form factors rather than modern cell architecture.
- **Low unit power limits use to repair scenarios** - The 190-200 Wp power range is unsuitable for new installations - the module only makes sense as a drop-in replacement within an existing, electrically compatible string, not as a standalone product for new builds.


## About this series

The 68-cell version of the Silk Pro series is FuturaSun's answer to a very practical problem: how do you replace a single damaged or stolen module in an existing array when the original panels, built around narrow 5-inch cells, have long been discontinued. This is a **revamping series**, engineered from the ground up for electrical and mechanical compatibility with older installations - with a module current of roughly 5 amps, the panel can be slotted into an existing string without rebuilding the whole array or swapping out the inverter. It uses **half-cut PERC cells** in M6 format with multi-busbar design, delivering stable performance and reduced losses from partial shading, a common scenario when replacing just one module. The narrow, elongated form factor, matched to older panel dimensions, along with the **silver frame and white backsheet**, keeps the roof looking visually consistent rather than showing an obvious mismatch between old and new modules. The series is backed by a **25-year performance warranty** and a 15-year product warranty, with design and quality overseen by FuturaSun's Italian headquarters. It is a dedicated solution for installers, service technicians, and owners of older PV systems who need a fast, predictable repair without technical compromises.


## Notable figures

- Module efficiency of 15.7% is 3.7pp below average for \*\*PERC 0-400W\*\* panels (median: 19.4%)
- At 156.7 W/m², this panel generates 37.5 W/m² less per unit area than \*\*PERC 0-400W\*\* median (194.2 W/m²)
- At -0.35%/°C, hot weather performance is typical for \*\*PERC 0-400W\*\* panels
- Weight of 14.0 kg (6.5 kg below \*\*PERC 0-400W\*\* median of 20.5 kg) allows easier transport and roof mounting
- #14017 for efficiency, #10660 for temperature performance out of 14354 panels


## Questions


### Is the FuturaSun Silk Pro 68-cell panel still available for purchase?

The 68-cell Silk Pro series has been discontinued by FuturaSun. Modules may still be available from distributors as remaining stock, so it's worth checking current availability with your supplier before buying. This panel was designed specifically for service replacements in older installations, so its supply is limited and it is no longer in active production.


### Can I replace a single damaged panel in an old installation with a FuturaSun Silk Pro?

Yes, that is the main purpose of this series. The module has a current of around 5 amps, so it can be wired into an existing string without rebuilding the whole chain or changing the inverter. Its narrow, elongated format echoes older panels built with 5-inch cells, allowing a stolen or damaged module to be replaced without disrupting the rest of the array.


### What is the maximum power output of the 68-cell Silk Pro panel?

The module reaches a maximum power of around 200 Wp. This value is intentionally close to older panels with narrow cells, since the panel is meant to replace a damaged unit in an existing string without significant mismatch in energy output between modules on the same string.


### What warranty comes with FuturaSun Silk Pro panels?

The series carries a 25-year power warranty and a 15-year product warranty. Even though the module is designed to replace older panels that may no longer have active coverage, the new component itself benefits from FuturaSun's standard long-term warranty terms, overseen by the manufacturer's Italian headquarters.


### Do the half-cut PERC cells in the Silk Pro reduce losses from partial shading?

Yes, the panel uses half-cut PERC cells based on M6 technology with multiple busbars. This design splits each cell into smaller segments, so shading on one segment has less impact on the panel as a whole. This matters for single-module replacements, where neighboring older panels may operate under different conditions.


### Will a new Silk Pro panel visually match older modules already on the roof?

Yes, thanks to its silver frame, white backsheet, and narrow, elongated design similar to older panel formats, the new module blends visually with an existing installation. This means that after replacing a single panel, there's no noticeable color or size mismatch between the old and new modules on the roof.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/FuturaSun_68_190-200W_Silk-Pro_EN-d4a8236226cd.pdf)


## Alternatives


| Panel | Power | How it differs |
| --- | --- | --- |
| [Gamko New Energy GKA182M150W](https://comparepv.com/panel/gamko-new-energy-gka182m150w) | 150 W | -50 W, lighter, +7.3 pp |
| [Gamko New Energy GKA182M160W](https://comparepv.com/panel/gamko-new-energy-gka182m160w) | 160 W | Lighter, +7.3 pp, +5 yr warranty |
| [Gamko New Energy GKA182M180W](https://comparepv.com/panel/gamko-new-energy-gka182m180w) | 180 W | Lighter, +7.3 pp, +5 yr warranty |
| [Gamko New Energy GKA182M200W](https://comparepv.com/panel/gamko-new-energy-gka182m200w) | 200 W | Lighter, +7.3 pp, +5 yr warranty |
| [Gamko New Energy GKA182M240W](https://comparepv.com/panel/gamko-new-energy-gka182m240w) | 240 W | +40 W, +7.3 pp, +5 yr warranty |
| [JA Solar NS-220MH-80](https://comparepv.com/panel/ja-solar-ns-220mh-80) | 220 W | Cooler, lighter, +6.3 pp |
| [PolyCrown Solar Tech NS-220MH-80](https://comparepv.com/panel/polycrown-solar-tech-ns-220mh-80) | 220 W | Cooler, lighter, +6.3 pp |
| [Isola New Energy YH250W-16M](https://comparepv.com/panel/isola-new-energy-yh250w-16m) | 250 W | +50 W, +5.5 pp, +5 yr warranty |
| [JA Solar NS-210MH-80](https://comparepv.com/panel/ja-solar-ns-210mh-80) | 210 W | Cooler, lighter, +5.3 pp |
| [PolyCrown Solar Tech NS-210MH-80](https://comparepv.com/panel/polycrown-solar-tech-ns-210mh-80) | 210 W | Cooler, lighter, +5.3 pp |
| [FuturaSun FU 190 M Silk Pro](https://comparepv.com/panel/futurasun-fu-190-m) | 190 W | -10 W, -0.8 pp |
| [Heckert Solar ZEUS 1.2 FullBlack 280W](https://comparepv.com/panel/heckert-solar-zeus-1-2-fullblack-280w) | 280 W | +80 W, cooler, +7.6 pp |
| [Heckert Solar ZEUS 3.2 285WP FullBlack](https://comparepv.com/panel/heckert-solar-zeus-3-2-285wp-fullblack) | 285 W | +85 W, cooler, +7.4 pp |
| [Gamko New Energy GKA182M285W](https://comparepv.com/panel/gamko-new-energy-gka182m285w) | 285 W | +85 W, +7.3 pp, +5 yr warranty |
| [Gamko New Energy GKA182M260W](https://comparepv.com/panel/gamko-new-energy-gka182m260w) | 260 W | +60 W, +7.3 pp, +5 yr warranty |
| [Gamko New Energy GKA182M270W](https://comparepv.com/panel/gamko-new-energy-gka182m270w) | 270 W | +70 W, +7.3 pp, +5 yr warranty |


---

Source: https://comparepv.com/panel/futurasun-fu-200-m

Not in this file, on the page: a thirty-year output simulator and alternatives filtered by how closely they match these dimensions.

