--- title: "Anern Energy ANM-ND560W 560W Solar Panel - Specs & Review | ComparePV" description: "Anern Energy ANM-ND560W 560W solar panel. Specs: 21.68% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/anern-energy-anm-nd560w" updated: 2026-09-11 --- # Anern Energy ANM-ND560W Middle of its segment, heavy for its output 259 panels in the segment N-type 550-600 W ## Identity - **Manufacturer:** Anern Energy - **Model:** ANM-ND560W - **Series:** N-type 560-580 Watt Bifacial Module with Dual Glass - **Rated power:** 560 W - **Cell technology:** N-type - **Bifacial:** yes ## How it compares Compared against segment N-type 550-600 W (259 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 560 W | 580 W | Weak - bottom 12% | | | Module efficiency | 21.68% | 22.45% | Weak - bottom 7% | 7,542 | | Power density | 216.8 | 224.5 | Weak - bottom 9% | 7,452 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,165 | | Weight (kg) | 32.0 kg | 29.5 kg | Weak - bottom 4% | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 21.68% | 22.45% | Weak - bottom 7% | 7,542 | | Power density | 216.8 | 224.5 | Weak - bottom 9% | 7,452 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,165 | | Weight per kWp | 57.1 | 52.3 | Weak - bottom 4% | 11,052 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Watch out for - **57.1 kg per kWp** - Bottom 4% of the N-type 550-600 W segment, against a median of 52.3. Ranked 11,052nd in the whole database. - **21.68% module efficiency** - Bottom 7% of the N-type 550-600 W segment, against a median of 22.45%. Ranked 7,542nd in the whole database. - **216.8 watts per square metre** - Bottom 9% of the N-type 550-600 W segment, against a median of 224.5. Ranked 7,452nd in the whole database. - **Best for:** Commercial, utility-scale and shaded-installations. - **Not ideal for:** Weight-limited structures, tight roof space and roofs where every square metre has to count. ## Specification ### Electrical - **Rated power (Pmax):** 560 W - **Efficiency:** 21.68 % - **Voltage at Pmax (Vmp):** 41.95 V - **Current at Pmax (Imp):** 13.35 A - **Open-circuit voltage (Voc):** 50.67 V - **Short-circuit current (Isc):** 14.13 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.290 %/degC - **Temperature coefficient of Voc:** -0.250 %/degC - **Temperature coefficient of Isc:** 0.045 %/degC - **NOCT:** 45 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** N-type - **Cell count:** 144 - **Bifacial:** yes - **Bifacial gain:** 25.00 ### Physical - **Length:** 2278 mm - **Width:** 1134 mm - **Thickness:** 30 mm - **Weight:** 32.0 kg - **Area:** 2.58 m2 - **Power density:** 216.8 Wp/m2 ### Warranty and degradation - **Product warranty:** 12 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 87.4 % - **First-year degradation:** 1.00 % - **Annual degradation:** 0.40 % - **Output after 30 years:** 489 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 7542 of 14005 | | Power density | 7452 of 14005 | | Temperature coefficient | 2165 of 14005 | | Weight | 11052 of 14005 | | Warranty | 21 of 14005 | ## Pros - **N-type with low temperature coefficient** - N-type cells exhibit a temperature coefficient of approximately -0.30%/°C (compared to approximately -0.35%/°C for standard P-type PERC cells), and virtually zero LID (Light-Induced Degradation), which translates directly into higher energy yield on hot days and more stable power output throughout the entire operating lifespan. - **Performance up to 22.45% – at the top of the segment** - The upper performance limit of 22.45% is identical to the results of comparable products from Emmvee Titanium Duo and Titanium Clear (22.45%), and is practically equivalent to ZNShine ZXM7-UHLD144 (22.44%). This means that the product series technically does not lag behind the competition in this power class. - **Bifacial dual-pane glass – durability and additional gain** - The dual-layer construction eliminates the risks associated with backsheet films (delamination, UV yellowing, and moisture permeability), while the bifacial technology allows for the recovery of an additional 11-23% of energy from reflected radiation – which is particularly important in ground-mounted and brighter roof-mounted installations. - **30-year power guarantee ≥87.4%** - The manufacturer claims to maintain at least 87.4% of its initial power output after 30 years of operation. In comparison, many mid-tier manufacturers offer 25-year warranties with a drop to 84.8%, making this series stand out for its long-term investment protection. - **SMBB + half-cut – improved performance in shaded conditions** - Multi-bus architecture (SMBB) shortens the current path and reduces resistive losses, while the half-cut technology divides the cells in half, limiting the impact of partial shading on the entire panel. When combined, they provide a significantly higher yield in suboptimal conditions (urban environments, roofs with chimneys). ## Cons - **Not BNEF Tier 1 status** - Anern Energy is not listed on the BNEF Tier 1 Solar Module Manufacturers list (the methodology, as of March 2026, requires supplying at least six projects ≥10 MW financed without recourse by six different banks). A comparable company, ZNShine, holds Tier 1 status, which may be a necessary condition for the acceptance of its modules in projects funded by banks. - **Limited brand recognition within the PV (photovoltaic) segment.** - Anern primarily positions itself as a provider of integrated B2B solutions (solar lamps, inverters, off-grid power systems) – high-power PV modules are a supplementary product, not the flagship offering. This may result in a weaker technical support network and limited service availability in Poland compared to manufacturers that focus solely on modules. ## About this series The Anern Energy N-type 560-580 Watt Bifacial Module with Dual Glass is a series of modules designed to maximize energy production in installations where every square meter counts. Thanks to the **dual-glass construction**, the panel gains higher resistance to moisture, micro-cracks, and material fatigue, resulting in more stable performance over the long term. The use of **bifacial technology** allows for the utilization of reflected light from the ground - a significant advantage, especially on bright roofs, membranes, gravel, and in ground-mounted installations. The heart of this series is the **N-type solar cells**, which offer better resistance to degradation and higher parameter repeatability over time, supported by half-cut solutions that improve performance in partially shaded conditions. Another key feature is **SMBB**, a multi-busbar architecture that reduces losses and improves current collection. This is a good choice for PV farms, large industrial rooftops, and projects where reliability, durability, and better performance in less-than-ideal conditions are priorities. ## Notable figures - Efficiency of 21.7% is 0.8pp below the \*\*N-type 550-600W\*\* median (22.4%) - At 216.8 W/m², this panel generates 7.7 W/m² less per unit area than \*\*N-type 550-600W\*\* median (224.5 W/m²) - At -0.29%/°C, hot weather performance is typical for \*\*N-type 550-600W\*\* panels - At 32.0 kg (2.5 kg above \*\*N-type 550-600W\*\* median of 29.5 kg), requires checking roof load capacity - 80% bifaciality enables rear-side power generation, boosting yield by 4-12% on reflective surfaces ## Questions ### What warranty is offered on the Anern Energy N-type 560–580W Bifacial Dual Glass series? The manufacturer provides a 12-year product warranty and a 30-year linear power output warranty. The annual degradation rate of N-type cells is just 0.40%, meaning that after 30 years of operation the modules retain a significantly higher percentage of their rated power compared to older P-type technology. This represents one of the best linear power warranties available in the large-scale panel segment. ### What advantages does the dual glass construction offer in the Anern Energy 560–580W series? Replacing the traditional backsheet with a second pane of tempered glass eliminates the primary causes of module degradation: moisture ingress, micro-cracking, and delamination. The dual glass construction extends the practical service life of the panel beyond 30 years and is particularly recommended for installations exposed to high humidity, harsh weather conditions, or intense solar irradiance. The module withstands snow loads of up to 5,400 Pa and wind loads of up to 2,400 Pa. ### What real-world energy gain can I expect from the bifacial design of the Anern 580W panels in a ground-mounted installation? The Anern N-type 560–580W series has a bifaciality factor of approximately 80%, which under favorable conditions — bright ground surface, gravel, or white membrane — translates to an additional energy yield of 10–20% compared to conventional monofacial modules. In a ground-mounted system with an optimal tilt angle and a highly reflective albedo surface, the effective output can exceed 580 W with no additional capital cost. ### How do the N-type cells in Anern panels differ from the widely used P-type PERC cells? N-type cells exhibit significantly lower Light-Induced Degradation (LID) and Light and Elevated Temperature Induced Degradation (LETID), resulting in more stable energy output throughout the entire service lifetime. In practical terms, Anern's data shows that N-type modules generate on average 3.9% more energy than their P-type PERC counterparts, and their conversion efficiency reaches 22.47%, which is above the market average for this power class. ### Are the Anern Energy 560–580W Bifacial Dual Glass panels suitable for large industrial rooftops and utility-scale PV farms? Yes, this series is designed primarily for commercial installations and utility-scale photovoltaic farms. The high unit power output of up to 580 W reduces the total number of modules required and lowers balance-of-system (BoS) and installation costs across large surface areas. The half-cut architecture with 144 cells of 182 mm improves tolerance to partial shading, which is particularly important on large roof sections where chimneys, HVAC equipment, or other structures may cast shadows. ### What does the SMBB technology used in the Anern N-type 580W panels mean? SMBB stands for Super Multi-Busbar — a contact architecture that uses a greater number of thinner busbars to collect current instead of a few wider ones. This reduces the electron travel path, lowers resistive losses, and minimizes the risk of micro-cracking during both manufacturing and long-term operation. The result is a higher fill factor (FF) on the power curve and improved parameter consistency across modules within the same series. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/anern-bifacial-module-560w-580w-solar-panel-data-sheet-5dd90f715b56.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [Longi Solar LR7-54HJD-510M](https://comparepv.com/panel/longi-lr7-54hjd-510m) | 510 W | -50 W, lighter, +3.3 pp | | [Longi Solar LR7-60HVH-560M](https://comparepv.com/panel/longi-lr7-60hvh-560m) | 560 W | Cooler, lighter, +3.1 pp | | [Longi Solar LR7-60HVH-555M](https://comparepv.com/panel/longi-lr7-60hvh-555m) | 555 W | Cooler, lighter, +2.9 pp | | [Longi Solar LR7-60HVHL-550M](https://comparepv.com/panel/longi-lr7-60hvhl-550m) | 550 W | Cooler, 16 kg lighter, +2.7 pp | | [JA Solar JAT60S40-540/LR](https://comparepv.com/panel/ja-solar-jat60s40-540-lr) | 540 W | Cooler, lighter, +2.7 pp | | [Gokin GK-5-60HG-540M](https://comparepv.com/panel/gokin-gk-5-60hg-540m) | 540 W | Cooler, lighter, +2.7 pp | | [Jinko Solar JKM545-54QL6-DV-F1-EU](https://comparepv.com/panel/jinko-solar-jkm545-54ql6-dv-f1-eu) | 545 W | Cooler, lighter, +2.6 pp | | [Anern Energy ANM-ND565W](https://comparepv.com/panel/anern-energy-anm-nd565w) | 565 W | Very close match | | [Anern Energy ANM-ND570W](https://comparepv.com/panel/anern-energy-anm-nd570w) | 570 W | +10 W, +0.4 pp | | [Anern Energy ANM-ND575W](https://comparepv.com/panel/anern-energy-anm-nd575w) | 575 W | +15 W, +0.6 pp | | [Anern Energy ANM-ND580W](https://comparepv.com/panel/anern-energy-anm-nd580w) | 580 W | +20 W, +0.8 pp | | [AIKO AIKO-A650-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a650-mae72mw) | 650 W | +90 W, lighter, +3.5 pp | | [AIKO AIKO-A645-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a645-mae72mw) | 645 W | +85 W, lighter, +3.3 pp | | [AIKO AIKO-A640-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a640-mae72mw) | 640 W | +80 W, lighter, +3.1 pp | | [AIKO AIKO-A635-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a635-mae72mw) | 635 W | +75 W, lighter, +2.9 pp | | [AIKO AIKO-A630-MAH72Dw](https://comparepv.com/panel/aiko-aiko-a630-mah72dw) | 630 W | +70 W, cooler, +2.7 pp | --- Source: https://comparepv.com/panel/anern-energy-anm-nd560w Not in this file, on the page: the I-V and temperature curves lifted from the manufacturer's datasheet, a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.