---
title: "AE Solar AE CMEQ-48BDS-480 Solar Panel: Specs & Datasheet | ComparePV"
description: "AE Solar AE CMEQ-48BDS-480 solar panel. Specs: 24.02% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient."
source: "https://comparepv.com/panel/ae-solar-ae-cmeq-48bds-480"
image: "https://comparepv.com/og/panel/ae-solar-ae-cmeq-48bds-480.png"
updated: 2026-11-14
---

# AE Solar AE CMEQ-48BDS-480

Space saver, no clear weak spot

1,125 panels in the segment TOPCon 450-500 W


## Identity

- **Manufacturer:** AE Solar
- **Model:** AE CMEQ-48BDS-480
- **Series:** METEOR III
- **Rated power:** 480 W
- **Cell technology:** TOPCon
- **Bifacial:** yes


## How it compares

Compared against segment TOPCon 450-500 W (1125 panels).


| Measure | This panel | Segment median | Standing | Rank |
| --- | --- | --- | --- | --- |
| Power (Wp) | 480 W | 465 W | Typical |  |
| Module efficiency | 24.02% | 22.52% | Strong - top 1% | 360 |
| Power density | 240.4 | 225.2 | Strong - top 1% | 358 |
| Temperature coefficient | -0.260 | -0.290 | Strong - top 4% | 521 |
| Weight (kg) | 24.0 kg | 24.0 kg | Typical |  |
| Performance warranty | 30 yrs | 30 yrs | Typical | 31 |


### Full peer table


| Measure | This panel | Segment median | Standing | Rank |
| --- | --- | --- | --- | --- |
| Module efficiency | 24.02% | 22.52% | Strong - top 1% | 360 |
| Power density | 240.4 | 225.2 | Strong - top 1% | 358 |
| Temperature coefficient | -0.260 | -0.290 | Strong - top 4% | 521 |
| Weight per kWp | 50.0 | 52.2 | Typical | 3,363 |
| Performance warranty | 30 yrs | 30 yrs | Typical | 31 |


### Strengths

- **240.4 watts per square metre** - Top 1% of the TOPCon 450-500 W segment, against a median of 225.2. Ranked 358th in the whole database.
- **24.02% module efficiency** - Top 1% of the TOPCon 450-500 W segment, against a median of 22.52%. Ranked 360th in the whole database.
- **-0.260 %/°C temperature coefficient** - Top 4% of the TOPCon 450-500 W segment, against a median of -0.290. Ranked 521st in the whole database.

- **Best for:** Commercial and residential.


## Specification


### Electrical

- **Rated power (Pmax):** 480 W
- **Efficiency:** 24.02 %
- **Voltage at Pmax (Vmp):** 31.17 V
- **Current at Pmax (Imp):** 15.40 A
- **Open-circuit voltage (Voc):** 36.83 V
- **Short-circuit current (Isc):** 15.98 A
- **Max system voltage:** 1500 V


### Temperature

- **Temperature coefficient of Pmax:** -0.260 %/degC
- **Temperature coefficient of Voc:** -0.240 %/degC
- **Temperature coefficient of Isc:** 0.046 %/degC
- **NOCT:** 41 degC


### Cell and construction

- **Cell type:** Monocrystalline
- **Cell technology:** TOPCon
- **Cell count:** 192
- **Bifacial:** yes


### Physical

- **Length:** 1762 mm
- **Width:** 1133 mm
- **Thickness:** 30 mm
- **Weight:** 24.0 kg
- **Area:** 2.00 m2
- **Power density:** 240.4 Wp/m2


### Warranty and degradation

- **Product warranty:** 15 years
- **Performance warranty:** 30 years
- **Output guaranteed at end of warranty:** 88.8 %
- **First-year degradation:** 1.00 %
- **Annual degradation:** 0.40 %
- **Output after 30 years:** 420 W


## Rank in the whole catalogue


| Measure | Position |
| --- | --- |
| Efficiency | 360 of 14354 |
| Power density | 358 of 14354 |
| Temperature coefficient | 521 of 14354 |
| Weight | 3363 of 14354 |
| Warranty | 31 of 14354 |


## Pros

- **Quarter-cut N-type TOPCon cells** - A new generation of quarter-cut cells reduces resistive losses and improves current distribution compared to standard half-cut designs. Combined with n-Type TOPCon technology, the module achieves a lower power temperature coefficient and better low-irradiance performance than p-Type PERC modules.
- **Bifacial double-glass construction** - The double-glass bifacial design captures reflected light from the ground to boost energy yield without increasing the installed footprint, while also limiting power degradation and improving mechanical resistance to snow and wind loads.
- **30-year linear power warranty** - The series offers a 30-year linear power warranty, well above the market-standard 25 years used by most Tier-1 manufacturers. For investors this translates into a lower LCOE over the full lifecycle of the installation.
- **Established German Tier-1 manufacturer** - AE Solar has operated since 2003, is headquartered in Germany, and has held BloombergNEF Tier-1 status continuously since 2021 (its 18th consecutive quarterly inclusion in 2026), making it the only German-headquartered PV module maker on that list - a strong bankability signal for the METEOR III series.
- **High efficiency up to 24.27%** - The 23.77-24.27% efficiency range places METEOR III at the upper end of the 475-485 Wp TOPCon segment, approaching leaders like the Gokin GK-5-54HG/HGb (24.3%) and clearly outperforming designs such as the ZNShine ZXM7-UHLD120 (22.47%).


## Cons

- **No long field track record yet** - METEOR III launches in 2026, so unlike more established competing series (e.g. Gokin GK-5-54HG), it lacks multi-year, independent field data on degradation and durability in real-world installations.


## About this series

The METEOR III series brings a new generation of quarter-cut cells to the AE Solar lineup, splitting each cell into four sections instead of the usual half-cut design, which reduces resistive losses and improves current distribution across the module. The new-generation **n-Type TOPCon** technology delivers better performance under low-light conditions and a lower power temperature coefficient than classic p-Type PERC cells, meaning the panel loses less output on hot days. Built as a **bifacial double-glass** module, it captures additional reflected light from the ground, boosting energy yield without increasing the installation footprint. This makes it especially appealing to investors focused on a lower **LCOE** over the long run, since the glass-on-glass design limits degradation and improves mechanical resistance to snow and wind loads. METEOR III also stands out with an exceptionally long **30-year power warranty**, well above market standard, translating into real investment security across the full service life of the installation. The series fits both commercial projects and large prosumer installations where component quality matters, backed by Tier 1 certification and the manufacturer's German quality control standards.


## Notable figures

- Efficiency of 24.0% is 1.5pp above the \*\*TOPCon 450-500W\*\* median (22.5%)
- At 240.4 W/m² power density, this panel generates 15.2 W/m² more per unit area than \*\*TOPCon 450-500W\*\* median (225.2 W/m²)
- Temperature coefficient of -0.26%/°C vs median -0.29%/°C means ~1% less power loss at 65°C
- Bifacial design (85% factor) captures reflected light - adds 4-13% yield on ground-mount or white roof
- In the top 3% for efficiency among all TOPCon panels


## Questions


### How does quarter-cut cell technology in the METEOR III panels differ from standard half-cut cells?

Quarter-cut cells are divided into four segments instead of two as in half-cut technology. Smaller segments mean lower current flowing through each path, which reduces resistive losses and limits heat buildup in the module. In practice this results in higher overall panel efficiency and better tolerance to partial shading, since damage or shading of one cell fragment has a smaller impact on the whole string's performance.


### Do bifacial METEOR III panels require special mounting to boost energy yield?

No special mounting is required, but to fully benefit from the bifacial design it's best to mount the panels on a racking system with greater clearance above the ground and over a light, reflective surface, such as white gravel or EPDM membrane. A sloped roof with dark tiles also works, but the rear-side gain will be lower than on ground-mount or carport installations with a bright background.


### What is the difference between the product warranty and the power warranty on the METEOR III series?

The product warranty covers 15 years and applies to material and workmanship defects, including the frame, connectors, and laminate. The power warranty covers 30 years and guarantees a minimum output level over time, i.e., what percentage of nominal power the panel retains after years of operation. This second warranty is significantly longer than the market standard of 25 years, improving long-term return on investment.


### Are METEOR III panels suitable for cold climates and low-light conditions?

Yes, the n-Type TOPCon cells used in METEOR III have a lower power temperature coefficient than classic p-Type PERC cells, meaning smaller power losses at high module operating temperatures. TOPCon technology also performs better under low irradiance, such as overcast skies or early morning light, allowing the panel to generate energy more efficiently than older PERC-based designs.


### What is the maximum power output of the METEOR III series and what installations is it suited for?

METEOR III modules reach up to 485 Wp maximum power output. Combined with the bifacial double-glass design, this power level makes the series well suited for large residential prosumer installations as well as commercial projects, where power density per square meter of roof or ground and Tier 1 quality assurance matter most.


### Is AE Solar a reliable manufacturer, and what does Tier 1 status mean for the METEOR III series?

AE Solar is headquartered in Germany and holds Tier 1 status under the Bloomberg New Energy Finance classification, indicating financial stability, project bankability, and German-standard quality control. For customers this translates into lower investment risk, easier project financing, and greater confidence that the manufacturer will be able to honor its long-term warranty commitments.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/AE_CMEQ_48_BDS_475_W_485_W_Ver26_10_1_dc29565605-ad459aa3e344.pdf)


## Alternatives


| Panel | Power | How it differs |
| --- | --- | --- |
| [Jinko Solar JKM510T-48HL6M-DB](https://comparepv.com/panel/jinko-solar-jkm510t-48hl6m-db) | 510 W | +30 W, cooler, +1.5 pp |
| [Jinko Solar JKM505T-48HL6M-DB](https://comparepv.com/panel/jinko-solar-jkm505t-48hl6m-db) | 505 W | +25 W, cooler, +1.2 pp |
| [Jinko Solar JKM500T-48HL6M-DB](https://comparepv.com/panel/jinko-solar-jkm500t-48hl6m-db) | 500 W | +20 W, cooler, +1.0 pp |
| [Longi Solar LR7-54HJD-510M](https://comparepv.com/panel/longi-lr7-54hjd-510m) | 510 W | +30 W, cooler, +1.0 pp |
| [AIKO AIKO-A495-MCE54Mw](https://comparepv.com/panel/aiko-aiko-a495-mce54mw) | 495 W | +15 W, lighter, +0.8 pp |
| [Jinko Solar JKM495T-48HL6M-DB](https://comparepv.com/panel/jinko-solar-jkm495t-48hl6m-db) | 495 W | Cooler, lighter, +0.8 pp |
| [Longi Solar LR7-54HJD-505M](https://comparepv.com/panel/longi-lr7-54hjd-505m) | 505 W | +25 W, cooler, +0.7 pp |
| [WINAICO WST-505BKX54-A2](https://comparepv.com/panel/winaico-wst-505bkx54-a2) | 505 W | +25 W, heavier, +0.7 pp |
| [Maxeon SPR-BE54-HD505](https://comparepv.com/panel/maxeon-spr-be54-hd505) | 505 W | +25 W, +0.7 pp, +10 yr warranty |
| [AE Solar CMER-64BD-290](https://comparepv.com/panel/ae-solar-cmer-64bd-290) | 290 W | -190 W, hotter, -9.5 pp |
| [AE Solar CMER-64BD-295](https://comparepv.com/panel/ae-solar-cmer-64bd-295) | 295 W | -185 W, hotter, -9.2 pp |
| [AE Solar CMER-64BD-300](https://comparepv.com/panel/ae-solar-cmer-64bd-300) | 300 W | -180 W, hotter, -9.0 pp |
| [AE Solar CMER-64BD-305](https://comparepv.com/panel/ae-solar-cmer-64bd-305) | 305 W | -175 W, hotter, -8.7 pp |
| [AE Solar CMER-64BD-310](https://comparepv.com/panel/ae-solar-cmer-64bd-310) | 310 W | -170 W, hotter, -8.5 pp |
| [AE Solar AE\_CMD-108BD-Terracotta](https://comparepv.com/panel/ae-solar-ae-cmd-108bd-terracotta) | 360 W | -120 W, hotter, -6.0 pp |
| [AE Solar AE\_CMD-108BD-Emerald](https://comparepv.com/panel/ae-solar-ae-cmd-108bd-emerald) | 375 W | -105 W, hotter, -5.2 pp |


---

Source: https://comparepv.com/panel/ae-solar-ae-cmeq-48bds-480

Not in this file, on the page: the I-V and temperature curves lifted from the manufacturer's datasheet, a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.

