--- title: "AE Solar AE CME-132-715 715W Solar Panel - Specs & Review | ComparePV" description: "AE Solar AE CME-132-715 715W solar panel. Specs: 23.04% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/ae-solar-ae-cme-132-715-1" updated: 2026-09-11 --- # AE Solar AE CME-132-715 Light for its output, no clear weak spot 420 panels in the segment TOPCon 700-750 W ## Identity - **Manufacturer:** AE Solar - **Model:** AE CME-132-715 - **Series:** Meteor CME-132 - **Rated power:** 715 W - **Cell technology:** TOPCon ## How it compares Compared against segment TOPCon 700-750 W (420 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 715 W | 715 W | Typical | | | Module efficiency | 23.04% | 23.00% | Typical | 1,711 | | Power density | 230.4 | 230.2 | Typical | 1,702 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,165 | | Weight (kg) | 31.5 kg | 38.0 kg | Strong - top 3% | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 23.04% | 23.00% | Typical | 1,711 | | Power density | 230.4 | 230.2 | Typical | 1,702 | | Temperature coefficient | -0.290 | -0.290 | Typical | 2,165 | | Weight per kWp | 44.1 | 52.9 | Strong - top 3% | 371 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Strengths - **44.1 kg per kWp** - Top 3% of the TOPCon 700-750 W segment, against a median of 52.9. Ranked 371st in the whole database. - **Best for:** Utility-scale, commercial and hot-climate. ## Specification ### Electrical - **Rated power (Pmax):** 715 W - **Efficiency:** 23.04 % - **Voltage at Pmax (Vmp):** 41.10 V - **Current at Pmax (Imp):** 17.40 A - **Open-circuit voltage (Voc):** 48.90 V - **Short-circuit current (Isc):** 18.40 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.290 %/degC - **Temperature coefficient of Voc:** -0.240 %/degC - **Temperature coefficient of Isc:** 0.040 %/degC - **NOCT:** 43 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** TOPCon - **Cell count:** 132 ### Physical - **Length:** 2383 mm - **Width:** 1302 mm - **Thickness:** 30 mm - **Weight:** 31.5 kg - **Area:** 3.10 m2 - **Power density:** 230.4 Wp/m2 ### Warranty and degradation - **Product warranty:** 30 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 87.4 % - **First-year degradation:** 1.00 % - **Annual degradation:** 0.40 % - **Output after 30 years:** 625 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 1711 of 14005 | | Power density | 1702 of 14005 | | Temperature coefficient | 2165 of 14005 | | Weight | 371 of 14005 | | Warranty | 21 of 14005 | ## Pros - **Segment efficiency at its peak: 23.21%** - The 720 W variant achieves an efficiency of 23.21%, slightly exceeding its direct competitors: Gamko GKA210N132 and Renesola RS9-700~720NBG-E1 (both at 23.18%) and DMEGC DMxxxG12T-B66HSW (23.20%). Given the limited roof space, this difference translates into a significantly higher energy yield without the need to increase the number of modules. - **30-year product and performance warranty** - AE Solar guarantees over 87% of its rated power after 30 years of operation, supported by both a product warranty and a linear power warranty for the same period. This is one of the longest standard warranty periods in the 700+ Wp module segment, which is important when calculating the LCOE (Levelized Cost of Electricity) for commercial and PV farm installations. - **The only European Tier 1 manufacturer of BNEF** - AE Solar is the only European manufacturer featured in the BloombergNEF 2024 bankability ranking (16th in a row, confirmed in Q1 2025), and its bankability rating has increased from 26% (2023) to 50% (2024). This makes it easier for European banks to finance projects and meet the requirements of insurers, without needing to accept manufacturers from outside of Europe. - **N-type TOPCon: Resistance to LID and Low Temperature Coefficient** - The N-type technology eliminates light-induced degradation (LID), which is typical of older PERC cells, providing better performance in cloudy and high-temperature conditions. The double-glass construction, as confirmed in the manufacturer's datasheet, ensures complete resistance to ammonia and saline mist, which extends the actual lifespan of the module in harsh environments (coastal and agricultural areas). ## Cons - **No bifacial effect** - The CME-132 series is monofacial (is\_bifacial: false), despite the use of a glass-glass construction. A direct competitor, Gamko New Energy, offers a bifacial variant, the GKA210N132BF, with comparable efficiency of 23.18%. In ground-mounted or flat-roof installations, this results in an additional annual yield of 5–15%. This limits the attractiveness of the CME-132 series in utility-scale projects, where bifaciality is standard. ## About this series The Meteor CME-132 series harnesses the potential of **N-type TOPCon** cells, which eliminate typical power degradation issues and guarantee higher yields in low-light conditions. The **Bifacial Double Glass** design makes the panels extremely resistant to mechanical factors and snow loads, while simultaneously capturing additional energy reflected from the ground. This solution effectively addresses the problem of limited installation lifespan in aggressive environments, offering significantly longer durability than standard monofacial modules. The innovative 132-cell architecture optimizes electrical parameters, facilitating compatibility with modern inverters and allowing for the design of more efficient strings. The Meteor CME-132 stands out from the competition with its **minimal temperature coefficient**, which translates into stable operation in full sun without sudden efficiency drops. Choosing this series is an investment in **maximum power density** per square meter, which is crucial when roof space is limited. These panels are dedicated to professional solar farms and modern energy-efficient homes, where the priority is reliability and the lowest cost of energy over the system life cycle. Thanks to the reinforced glass-glass structure, the modules exhibit full resistance to ammonia and salt mist, making them an unrivaled solution in harsh industrial conditions. ## Notable figures - Efficiency of 23.0% matches the \*\*TOPCon 700-750W\*\* median - Power density of 230.4 W/m² matches the \*\*TOPCon 700-750W\*\* median - Temperature coefficient of -0.29%/°C matches the \*\*TOPCon 700-750W\*\* median - At 31.5 kg, this panel is 6.5 kg lighter than \*\*TOPCon 700-750W\*\* median (38.0 kg) - easier handling during installation - In the top 12% for efficiency among all TOPCon panels ## Questions ### What is the warranty on AE Solar Meteor CME-132 solar panels? AE Solar offers up to 30 years of product warranty and 30 years of performance warranty for the Meteor CME-132 series. This means that the manufacturer guarantees both the physical integrity of the module and the consistent energy output for three decades. This is one of the longest warranties available on the market, comparable to those offered by other Tier 1 manufacturers. ### Do AE Solar Meteor CME-132 solar panels perform well in cloudy and low-light conditions? Yes. The N-type TOPCon cell technology used in the Meteor CME-132 series offers significantly improved performance under low sunlight conditions compared to older PERC cells. Due to its higher bifaciality and lower carrier recombination rate, the panels produce more energy on cloudy days and in the early morning or late evening, which has a real impact on the annual energy yield in the Polish climate. ### What distinguishes the double-glass construction of the Meteor CME-132 from standard panels with a rear foil layer? In the Meteor CME-132 series, instead of the traditional backsheet, a glass back was used. This glass-to-glass construction is resistant to ammonia, saline mist, and humidity, making the modules suitable for installations in agricultural facilities, near coastal areas, or in aggressive industrial environments. Furthermore, the glass does not degrade like a sheet, which extends the actual lifespan of the panel to over 30 years. ### Is the Meteor CME-132, with a power output of 720 Wp, suitable for a small residential rooftop? 720 Wp modules are large-format modules primarily designed for solar farms and large commercial installations. Their size and weight may pose challenges for installation on an average residential roof, limiting the number of possible configurations. However, with limited roof space, the high power density of the CME-132 series is an advantage, allowing for the generation of more kilowatts from a smaller number of modules. ### How does the low temperature coefficient of the Meteor CME-132 panels translate into summer performance? N-type TOPCon cells have a power temperature coefficient of approximately -0.30%/°C, which is better than typical PERC cells (-0.35%/°C). In practice, this means that when the module temperature on a sunny summer day reaches 65-70°C, the Meteor CME-132 series loses less power than a PERC panel with the same nominal power output. Stable performance in hot weather translates to a real increase in kilowatt-hours during peak season. ### Is AE Solar a reputable manufacturer, and does the Meteor CME-132 have certifications? AE Solar is a German-based manufacturer, classified by Bloomberg NEF as Tier 1, which indicates its financial and operational credibility, confirmed by independent analysts. The Meteor CME-132 series has IEC 61215 and IEC 61730 certifications. Production takes place in modern facilities with ISO 9001 certification, and the modules have undergone tests for mechanical load resistance, salt fog resistance, and ammonia resistance, according to IEC standards. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/ae-cme-132-700w-720w-sc-11-5-ver25-9-1-a18590bcf03b.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [AIKO AIKO-A680-MDE72Mw](https://comparepv.com/panel/aiko-aiko-a680-mde72mw) | 680 W | -35 W, cooler, +2.2 pp | | [AIKO AIKO-A675-MDE72Mw](https://comparepv.com/panel/aiko-aiko-a675-mde72mw) | 675 W | -40 W, cooler, +2.0 pp | | [AIKO AIKO-A700-MAE78Dw](https://comparepv.com/panel/aiko-aiko-a700-mae78dw) | 700 W | Cooler, heavier, +2.0 pp | | [AIKO AIKO-A695-MAE78Dw](https://comparepv.com/panel/aiko-aiko-a695-mae78dw) | 695 W | Cooler, heavier, +1.9 pp | | [AIKO AIKO-G670-MCH72Mw](https://comparepv.com/panel/aiko-aiko-g670-mch72mw) | 670 W | -45 W, lighter, +1.8 pp | | [Longi Solar LR7-72HVHF-670M](https://comparepv.com/panel/longi-lr7-72hvhf-670m) | 670 W | -45 W, lighter, +1.8 pp | | [Jinko Solar JKM650-670N-66QL6-BDV (670W class)](https://comparepv.com/panel/jinko-solar-jkm650-670n-66ql6-bdv-670w-class) | 670 W | -45 W, cooler, +1.8 pp | | [AE Solar AE ME-132 640W](https://comparepv.com/panel/ae-solar-ae-me-132-640w) | 640 W | -75 W, hotter, -2.4 pp | | [AE Solar AE ME-132 645W](https://comparepv.com/panel/ae-solar-ae-me-132-645w) | 645 W | -70 W, hotter, -2.2 pp | | [AIKO AIKO-A805-GRH78Dw](https://comparepv.com/panel/aiko-aiko-a805-grh78dw) | 805 W | +90 W, heavier, +2.1 pp | | [AIKO AIKO-A800-GRH78Dw](https://comparepv.com/panel/aiko-aiko-a800-grh78dw) | 800 W | +85 W, heavier, +1.9 pp | | [AIKO AIKO-A795-GRH78Dw](https://comparepv.com/panel/aiko-aiko-a795-grh78dw) | 795 W | +80 W, heavier, +1.8 pp | | [AIKO AIKO-A790-GRH78Dw](https://comparepv.com/panel/aiko-aiko-a790-grh78dw) | 790 W | +75 W, heavier, +1.6 pp | | [Trina Solar TSM-NEG21C.20Q-760](https://comparepv.com/panel/trina-solar-tsm-neg21c-20q-760) | 760 W | +45 W, heavier, +1.5 pp | | [AIKO AIKO-A785-GRH78Dw](https://comparepv.com/panel/aiko-aiko-a785-grh78dw) | 785 W | +70 W, heavier, +1.4 pp | | [Gokin GK-4-78HGBD-780M](https://comparepv.com/panel/gokin-gk-4-78hgbd-780m) | 780 W | +65 W, heavier, +1.3 pp | --- Source: https://comparepv.com/panel/ae-solar-ae-cme-132-715-1 Not in this file, on the page: the I-V and temperature curves lifted from the manufacturer's datasheet, a thirty-year output simulator and alternatives filtered by how closely they match these dimensions.