---
title: "AE Solar AE CMD-80BD-I-330 Solar Panel: Specs & Datasheet | ComparePV"
description: "AE Solar AE CMD-80BD-I-330 solar panel. Specs: 15.31% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient."
source: "https://comparepv.com/panel/ae-solar-ae-cmd-80bd-i-330"
image: "https://comparepv.com/og/panel/ae-solar-ae-cmd-80bd-i-330.png"
updated: 2026-11-14
---

# AE Solar AE CMD-80BD-I-330

Strong in heat, no clear weak spot

44 panels in the segment TOPCon 300-350 W


## Identity

- **Manufacturer:** AE Solar
- **Model:** AE CMD-80BD-I-330
- **Series:** CMD-80BD-I
- **Rated power:** 330 W
- **Cell technology:** TOPCon
- **Bifacial:** yes


## How it compares

Compared against segment TOPCon 300-350 W (44 panels).


| Measure | This panel | Segment median | Standing | Rank |
| --- | --- | --- | --- | --- |
| Power (Wp) | 330 W | 320 W | Strong - top 22% |  |
| Module efficiency | 15.31% | 15.04% | Typical | 14,088 |
| Power density | 153.1 | 150.1 | Typical | 14,071 |
| Temperature coefficient | -0.290 | -0.300 | Strong - top 20% | 2,288 |
| Weight (kg) | 31.5 kg | 27.2 kg | Typical |  |
| Performance warranty | 30 yrs | 30 yrs | Typical | 31 |


### Full peer table


| Measure | This panel | Segment median | Standing | Rank |
| --- | --- | --- | --- | --- |
| Module efficiency | 15.31% | 15.04% | Typical | 14,088 |
| Power density | 153.1 | 150.1 | Typical | 14,071 |
| Temperature coefficient | -0.290 | -0.300 | Strong - top 20% | 2,288 |
| Weight per kWp | 95.5 | 87.2 | Typical | 14,234 |
| Performance warranty | 30 yrs | 30 yrs | Typical | 31 |


### Strengths

- **-0.290 %/°C temperature coefficient** - Top 20% of the TOPCon 300-350 W segment, against a median of -0.300.

- **Best for:** Commercial, shaded-installations and cold-climate.


## Specification


### Electrical

- **Rated power (Pmax):** 330 W
- **Efficiency:** 15.31 %
- **Voltage at Pmax (Vmp):** 23.93 V
- **Current at Pmax (Imp):** 13.79 A
- **Open-circuit voltage (Voc):** 28.37 V
- **Short-circuit current (Isc):** 14.54 A
- **Max system voltage:** 1500 V


### Temperature

- **Temperature coefficient of Pmax:** -0.290 %/degC
- **Temperature coefficient of Voc:** -0.250 %/degC
- **Temperature coefficient of Isc:** 0.046 %/degC
- **NOCT:** 42 degC


### Cell and construction

- **Cell type:** Monocrystalline
- **Cell technology:** TOPCon
- **Cell count:** 80
- **Bifacial:** yes
- **Bifacial gain:** 10.00


### Physical

- **Length:** 1902 mm
- **Width:** 1133 mm
- **Thickness:** 30 mm
- **Weight:** 31.5 kg
- **Area:** 2.15 m2
- **Power density:** 153.1 Wp/m2


### Warranty and degradation

- **Product warranty:** 15 years
- **Performance warranty:** 30 years
- **Output guaranteed at end of warranty:** 87.4 %
- **First-year degradation:** 1.00 %
- **Annual degradation:** 0.40 %
- **Output after 30 years:** 288 W


## Rank in the whole catalogue


| Measure | Position |
| --- | --- |
| Efficiency | 14088 of 14354 |
| Power density | 14071 of 14354 |
| Temperature coefficient | 2288 of 14354 |
| Weight | 14234 of 14354 |
| Warranty | 31 of 14354 |


## Pros

- **HW4-certified hail resistance (40 mm)** - The CMD-80BD-I series, part of the Alpine line, is tested against hailstones up to 40 mm in diameter (HW4 rating), and combined with a 3.2 mm front glass this sets it apart from standard bifacial modules, which typically use 2.0-2.5 mm glass.
- **N-type TOPCon half-cut cells** - TOPCon half-cut cell technology delivers lower LID/LeTID degradation than older PERC cells and better tolerance to partial shading and microcracks, supporting a more stable energy yield in harsh field conditions.
- **Bifacial design with transparent rear glass** - A high-transmittance rear glass enables additional energy capture from reflected irradiance without increasing footprint - a meaningful advantage on bright ground, snow, or sand surfaces.
- **30-year linear power warranty** - The 30-year power warranty (15-year product warranty) matches the highest tier currently available on the market, putting this series on par with premium tier-1 modules and improving LCOE predictability over the project lifetime.
- **Bankable Tier-1 German manufacturer (since 2003)** - AE Solar is listed as a bankable Tier-1 manufacturer headquartered in Germany, operating since 2003, which facilitates project financing for banks and institutional investors requiring an established supplier.


## Cons

- **Series discontinued** - The CMD-80BD-I series has been discontinued (status: discontinued), meaning limited availability of modules for system extensions and potential challenges with servicing and warranty claims going forward.
- **Lower efficiency versus peers** - Efficiency of 14.62-15.55% is noticeably below comparable Tier-1/Tier-2 modules - Selfa SV120M.5(3) reaches 19.8% and SunLink LUXMAX 20.16% at the same 335 Wp max power, meaning a larger mounting area is needed for the equivalent system capacity.


## About this series

The **CMD-80BD-I** series from the Alpine line is a double-glass bifacial module engineered for extreme climate conditions, including regions exposed to intense hailstorms. The module features **n-Type TOPCon half-cut cells**, delivering greater resistance to microcracks and more stable performance under partial shading. A key differentiator of this series is its **certified resistance to 40 mm hailstones (HW4)**, paired with a 3.2 mm front glass that provides extra mechanical protection in conditions that would damage standard panels. The transparent, high-transmission rear glass enables the **bifacial** effect, boosting energy yield without requiring additional roof or ground space. The whole assembly sits in a T6 anodized aluminum alloy frame, ensuring structural stability under wind and snow loads. This makes the series well suited for investors and installers working on projects in mountainous, coastal, or otherwise harsh locations, where weather resilience directly affects system lifespan and LCOE. Backed by a long-term manufacturer warranty and certifications for salt mist, ammonia, and sand/dust resistance, the series performs reliably in both agricultural and industrial installations.


## Notable figures

- At 15.3% efficiency, this panel is on par with typical \*\*TOPCon 0-400W\*\* modules
- Power density of 153.1 W/m² matches the \*\*TOPCon 0-400W\*\* median
- At -0.29%/°C, hot weather performance is typical for \*\*TOPCon 0-400W\*\* panels
- At 31.5 kg (7.6 kg above \*\*TOPCon 0-400W\*\* median of 23.9 kg), requires checking roof load capacity
- 80% bifaciality enables rear-side power generation, boosting yield by 4-12% on reflective surfaces


## Questions


### Is the AE Solar CMD-80BD-I series still available for purchase?

The CMD-80BD-I series has been discontinued from AE Solar's current production lineup and replaced by newer models in the Alpine range. Availability is now limited to remaining distributor stock. Anyone planning to expand an existing installation with identical modules should contact a supplier promptly, as matching visual appearance and electrical specs with newer modules may be difficult once stock runs out.


### How does the hail resistance of the CMD-80BD-I differ from standard PV modules?

Standard PV panels are typically tested against hail up to 25 mm in diameter, while the CMD-80BD-I carries an HW4 certification, rated for hail up to 40 mm. It also uses a 3.2 mm front glass, thicker than the typical 2 mm found on standard panels. This gives a real advantage for installations in mountainous regions or areas prone to severe hailstorms.


### What warranty does AE Solar offer on the CMD-80BD-I panels?

The manufacturer provides a 15-year product warranty along with a 30-year power output warranty. This means the module is expected to retain a high percentage of its rated output for significantly longer than panels with a typical 25-year linear power warranty. AE Solar is a Tier 1 manufacturer headquartered in Germany, which further supports the credibility of these terms.


### What does bifacial design offer on the CMD-80BD-I, and is it worth the extra cost?

The transparent rear glass lets the module capture light reflected off the ground or roof surface, which over a bright surface (such as white gravel, snow, or metal roofing) can increase energy yield by several percentage points compared to a monofacial panel of the same 335 Wp rating. The premium makes the most sense for ground-mounted systems or flat roofs with suitable tilt and ground clearance.


### Do the n-Type TOPCon cells in the CMD-80BD-I handle partial shading better than standard PERC cells?

Yes, the half-cut design splits the TOPCon cells into smaller segments, so under partial shading (from chimneys, trees, or neighboring panels) the overall module experiences smaller power losses than panels using full-size PERC cells. n-Type TOPCon cells also have a lower degradation rate over time and better resistance to microcracks caused during transport and installation.


### What kinds of installations is the 335 Wp CMD-80BD-I series best suited for?

With a maximum power of 335 Wp and a design resistant to hail, salt corrosion, ammonia, and sand, this panel is built for demanding projects: mountain and coastal installations, agricultural sites (such as near livestock buildings), and industrial applications. The anodized T6 aluminum alloy frame adds extra strength against wind and snow loads, making it a solid choice where standard panels would degrade faster.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/AE_CMD_80_BD_I_3315_W_335_W_Ver26_10_1_9b68af294c-8b5e12cb81a0.pdf)


## Alternatives


| Panel | Power | How it differs |
| --- | --- | --- |
| [JA Solar NS-300MH-72](https://comparepv.com/panel/ja-solar-ns-300mh-72) | 300 W | 19 kg lighter, +8.0 pp, -5 yr warranty |
| [PolyCrown Solar Tech NS-300MH-72](https://comparepv.com/panel/polycrown-solar-tech-ns-300mh-72) | 300 W | 19 kg lighter, +8.0 pp, -5 yr warranty |
| [Heckert Solar ZEUS 1.2 FullBlack 280W](https://comparepv.com/panel/heckert-solar-zeus-1-2-fullblack-280w) | 280 W | -50 W, 17 kg lighter, +8.0 pp |
| [JA Solar NS-330MH-80](https://comparepv.com/panel/ja-solar-ns-330mh-80) | 330 W | 16 kg lighter, +7.8 pp, -5 yr warranty |
| [PolyCrown Solar Tech NS-330MH-80](https://comparepv.com/panel/polycrown-solar-tech-ns-330mh-80) | 330 W | 16 kg lighter, +7.8 pp, -5 yr warranty |
| [Heckert Solar ZEUS 3.2 285WP FullBlack](https://comparepv.com/panel/heckert-solar-zeus-3-2-285wp-fullblack) | 285 W | -45 W, 16 kg lighter, +7.8 pp |
| [Gamko New Energy GKA182M285W](https://comparepv.com/panel/gamko-new-energy-gka182m285w) | 285 W | -45 W, 21 kg lighter, +7.7 pp |
| [Gamko New Energy GKA182M300W](https://comparepv.com/panel/gamko-new-energy-gka182m300w) | 300 W | -30 W, 15 kg lighter, +7.7 pp |
| [Gamko New Energy GKA210M320W](https://comparepv.com/panel/gamko-new-energy-gka210m320w) | 320 W | -10 W, 15 kg lighter, +7.7 pp |
| [AE Solar AE CMD-80BD-315](https://comparepv.com/panel/ae-solar-ae-cmd-80bd-315) | 315 W | -15 W, lighter, -0.7 pp |
| [AE Solar AE CMD-80BD-320](https://comparepv.com/panel/ae-solar-ae-cmd-80bd-320) | 320 W | -10 W, lighter, -0.5 pp |
| [AE Solar AE CMD-80BD-325](https://comparepv.com/panel/ae-solar-ae-cmd-80bd-325) | 325 W | Lighter, -0.2 pp |
| [AE Solar AE CMD-80BD-335](https://comparepv.com/panel/ae-solar-ae-cmd-80bd-335) | 335 W | Lighter, +0.2 pp |
| [Longi Solar LR7-60HVH-560M](https://comparepv.com/panel/longi-lr7-60hvh-560m) | 560 W | +230 W, lighter, +9.5 pp |
| [Longi Solar LR7-60HVH-555M](https://comparepv.com/panel/longi-lr7-60hvh-555m) | 555 W | +225 W, lighter, +9.3 pp |
| [Longi Solar LR7-60HVHL-550M](https://comparepv.com/panel/longi-lr7-60hvhl-550m) | 550 W | +220 W, 15 kg lighter, +9.1 pp |


---

Source: https://comparepv.com/panel/ae-solar-ae-cmd-80bd-i-330

Not in this file, on the page: the I-V and temperature curves lifted from the manufacturer's datasheet, a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.

