--- title: "Adani Solar ASB-M10-144-580 580W Solar Panel - Specs & Review | ComparePV" description: "Adani Solar ASB-M10-144-580 580W solar panel. Specs: 22.50% efficiency, Monocrystalline cells, dimensions, warranty and temperature coefficient." source: "https://comparepv.com/panel/adani-solar-asb-m10-144-580" updated: 2026-09-11 --- # Adani Solar ASB-M10-144-580 Middle of its segment, weak in heat 1,017 panels in the segment TOPCon 550-600 W ## Identity - **Manufacturer:** Adani Solar - **Model:** ASB-M10-144-580 - **Series:** Elan Shine TOPCon Series - **Rated power:** 580 W - **Cell technology:** TOPCon - **Bifacial:** yes ## How it compares Compared against segment TOPCon 550-600 W (1017 panels). | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Power (Wp) | 580 W | 580 W | Typical | | | Module efficiency | 22.50% | 22.44% | Typical | 4,222 | | Power density | 224.7 | 224.4 | Typical | 4,528 | | Temperature coefficient | -0.320 | -0.290 | Weak - bottom 8% | 8,312 | | Weight (kg) | 31.3 kg | 31.2 kg | Typical | | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Full peer table | Measure | This panel | Segment median | Standing | Rank | | --- | --- | --- | --- | --- | | Module efficiency | 22.50% | 22.44% | Typical | 4,222 | | Power density | 224.7 | 224.4 | Typical | 4,528 | | Temperature coefficient | -0.320 | -0.290 | Weak - bottom 8% | 8,312 | | Weight per kWp | 54.0 | 53.8 | Typical | 8,159 | | Performance warranty | 30 yrs | 30 yrs | Typical | 21 | ### Watch out for - **-0.320 %/°C temperature coefficient** - Bottom 8% of the TOPCon 550-600 W segment, against a median of -0.290. Ranked 8,312th in the whole database. - **Best for:** Utility-scale and commercial. - **Not ideal for:** Hot climates. ## Specification ### Electrical - **Rated power (Pmax):** 580 W - **Efficiency:** 22.50 % - **Voltage at Pmax (Vmp):** 43.98 V - **Current at Pmax (Imp):** 13.19 A - **Open-circuit voltage (Voc):** 52.50 V - **Short-circuit current (Isc):** 13.95 A - **Max system voltage:** 1500 V ### Temperature - **Temperature coefficient of Pmax:** -0.320 %/degC - **Temperature coefficient of Voc:** -0.240 %/degC - **Temperature coefficient of Isc:** 0.028 %/degC - **NOCT:** 45 degC ### Cell and construction - **Cell type:** Monocrystalline - **Cell technology:** TOPCon - **Cell count:** 144 - **Bifacial:** yes - **Bifacial gain:** 30.00 ### Physical - **Length:** 2278 mm - **Width:** 1133 mm - **Thickness:** 30 mm - **Weight:** 31.3 kg - **Area:** 2.58 m2 - **Power density:** 224.7 Wp/m2 ### Warranty and degradation - **Product warranty:** 12 years - **Performance warranty:** 30 years - **Output guaranteed at end of warranty:** 87.4 % - **First-year degradation:** 1.00 % - **Annual degradation:** 0.40 % - **Output after 30 years:** 507 W ## Rank in the whole catalogue | Measure | Position | | --- | --- | | Efficiency | 4222 of 14005 | | Power density | 4528 of 14005 | | Temperature coefficient | 8312 of 14005 | | Weight | 8159 of 14005 | | Warranty | 21 of 14005 | ## Pros - **Highest efficiency in the segment** - Efficiency up to 23.71% puts the Elan Shine series at the top among comparable TOPCon modules - ahead of Jinko EAGLE G7B (23.69%), Luxen N6 (22.61%), and REC Alpha Pro M (22.5%) at the same 640 Wp maximum power. - **Bifacial N-type TOPCon cells** - Bifacial technology allows the module to generate power from reflected and diffuse light hitting the rear side, which with proper mounting (e.g., over a reflective surface) meaningfully increases energy yield without increasing installation footprint. - **30-year linear power warranty** - Adani Solar guarantees high power output over 30 years, matching the best market standards for N-type technology and exceeding the typical 25-year warranties of older PERC series. - **Dual-glass construction for added durability** - Dual glass construction improves mechanical resistance and protects against moisture-induced degradation (PID), contributing to a longer effective installation lifespan and lower levelized cost of energy (LCOE). - **Zero LID typical of N-type cells** - N-type TOPCon cells do not exhibit the Light-Induced Degradation effect characteristic of older P-type/PERC cells, ensuring more stable energy output from day one of operation. ## Cons - **12-year product warranty trails segment leaders** - The product warranty is limited to 12 years, shorter than some Tier-1 competitors (e.g., REC offers up to 25 years of product warranty), which could affect service costs in the second decade of operation despite the 30-year power warranty. - **Shorter manufacturer track record** - Adani Solar was founded in 2015, considerably later than some peer comparables (REC has operated since 1996), meaning a smaller field-performance data set on long-term module durability compared to more established brands. ## About this series The Elan Shine TOPCon series from Adani Solar answers the needs of installations where maximizing energy yield from limited roof or ground space is critical. The panels use **bifacial N-Type TOPCon cells**, allowing the module to generate power from reflected and diffused light hitting its rear side as well, meaningfully boosting output from the same installation without increasing its footprint. The **multi-busbar technology** reduces resistive losses and improves current collection across the entire cell surface, while a low temperature coefficient means the panels retain high performance even on hot days, when conventional P-Type modules see steeper drops. The **dual glass construction** increases mechanical durability and extends the installation's real-world lifespan, translating into a lower LCOE over the full life cycle. The series is aimed at investors seeking a balance between high efficiency and long-term stability, suited for utility-scale solar farms as well as commercial and high-end residential projects. Low annual degradation combined with a multi-decade power warranty makes this series an attractive alternative to older PERC technology, particularly where a predictable, stable return on investment over several decades is the priority. ## Notable figures - Efficiency of 22.5% matches the \*\*TOPCon 550-600W\*\* median - At 224.7 W/m² power density, roof space requirements are typical for \*\*TOPCon 550-600W\*\* panels - At -0.32%/°C, loses 0.03pp more power per degree than \*\*TOPCon 550-600W\*\* median (-0.29%/°C) - Bifacial design (80% factor) captures reflected light - adds 4-12% yield on ground-mount or white roof - Ranked #4222 out of 14005 panels for efficiency in the database ## Questions ### How does the bifacial Elan Shine TOPCon panel differ from standard PERC panels? The main difference is the use of N-Type TOPCon cells instead of P-Type PERC, combined with a bifacial module design. The Elan Shine panel generates power from both the front and rear side, capturing light reflected off the roof or ground. TOPCon also has a lower temperature coefficient, so it loses less output on hot days compared to conventional PERC, resulting in higher energy yield from the same installation. ### What warranty comes with the Elan Shine TOPCon series and what does it cover? Adani Solar offers a 12-year product warranty covering material and workmanship defects, along with a 30-year power output warranty. This means the manufacturer guarantees a defined performance level of the module over three decades, which is an important factor when calculating the expected return on investment for a solar installation. ### What is the maximum power output of the Elan Shine TOPCon panel and which installations is it suited for? These modules reach up to 640 Wp, making them suitable for large-scale solar farms as well as commercial installations and high-budget residential projects. Higher wattage per panel reduces the number of modules needed to reach a target system capacity, lowering costs for mounting structures and cabling. ### Does the dual-glass construction in Elan Shine panels affect durability and installation cost? The dual-glass design increases mechanical resistance to damage, moisture, and microcracks, extending the effective lifespan of the installation compared to backsheet modules. These panels are slightly heavier, which should be factored into mounting structure selection, but lower annual degradation and longer service life translate into a lower levelized cost of energy (LCOE) over the system's lifetime. ### Is Adani Solar a Tier 1 manufacturer and is it a reliable choice for large investments? Yes, Adani Solar is listed as a Tier 1 manufacturer, reflecting financial stability, in-house production lines, and a proven track record supplying modules for large bankable projects. The company is headquartered in India and is one of the region's major panel manufacturers, which matters when banks and investors assess long-term warranty risk for renewable energy projects. ### Does the multi-busbar technology in Elan Shine TOPCon panels actually improve performance? Yes, a higher busbar count reduces resistive losses and improves current collection across the entire cell surface, increasing module efficiency, especially under partial shading. Combined with TOPCon cell technology and bifacial design, this delivers a measurable boost in energy production compared to older panel generations with fewer busbars. ## Datasheet [Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/shine-topcon-g2g-modules-gen-ii-6d0414b5b5c6.pdf) ## Alternatives | Panel | Power | How it differs | | --- | --- | --- | | [Longi Solar LR7-60HVH-560M](https://comparepv.com/panel/longi-lr7-60hvh-560m) | 560 W | Cooler, lighter, +2.3 pp | | [Longi Solar LR7-60HVH-555M](https://comparepv.com/panel/longi-lr7-60hvh-555m) | 555 W | Cooler, lighter, +2.1 pp | | [AIKO AIKO-A630-MAH72Dw](https://comparepv.com/panel/aiko-aiko-a630-mah72dw) | 630 W | +50 W, cooler, +1.9 pp | | [Longi Solar LR7-60HVHL-550M](https://comparepv.com/panel/longi-lr7-60hvhl-550m) | 550 W | Cooler, 15 kg lighter, +1.9 pp | | [JA Solar JAT60S40-540/LR](https://comparepv.com/panel/ja-solar-jat60s40-540-lr) | 540 W | Cooler, lighter, +1.9 pp | | [Adani Solar ASB-M10-144-555](https://comparepv.com/panel/adani-solar-asb-m10-144-555) | 555 W | -25 W, -1.0 pp | | [Adani Solar ASB-M10-144-560](https://comparepv.com/panel/adani-solar-asb-m10-144-560) | 560 W | -20 W, -0.8 pp | | [Adani Solar ASB-M10-144-565](https://comparepv.com/panel/adani-solar-asb-m10-144-565) | 565 W | -15 W, -0.6 pp | | [Adani Solar ASB-M10-144-570](https://comparepv.com/panel/adani-solar-asb-m10-144-570) | 570 W | -10 W, -0.4 pp | | [Adani Solar ASB-M10-144-575](https://comparepv.com/panel/adani-solar-asb-m10-144-575) | 575 W | Very close match | | [AIKO AIKO-A650-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a650-mae72mw) | 650 W | +70 W, cooler, +2.7 pp | | [AIKO AIKO-A645-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a645-mae72mw) | 645 W | +65 W, cooler, +2.5 pp | | [AIKO AIKO-A640-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a640-mae72mw) | 640 W | +60 W, cooler, +2.3 pp | | [AIKO AIKO-A635-MAE72Mw](https://comparepv.com/panel/aiko-aiko-a635-mae72mw) | 635 W | +55 W, cooler, +2.1 pp | --- Source: https://comparepv.com/panel/adani-solar-asb-m10-144-580 Not in this file, on the page: a thirty-year output simulator, a bifacial gain calculator and alternatives filtered by how closely they match these dimensions.