---
title: "Wattsonic Matic-10kW-50A Hybrid Inverter: Specs & Datasheet | ComparePV"
description: "Wattsonic Matic-10kW-50A 10 kW hybrid inverter. Specs: 97.9% European efficiency, 4 MPPT, 1000 V max DC input, 51.0 kg, 10 yrs warranty."
source: "https://comparepv.com/inverter/wattsonic-matic-10kw-50a"
updated: 2026-11-14
---

# Wattsonic Matic-10kW-50A


## Identity

- **Manufacturer:** Wattsonic
- **Model:** Matic-10kW-50A
- **Series:** WattMatic AIO Home
- **Rated AC power:** 10 kW
- **Type:** Hybrid
- **Phases:** Three-phase
- **Battery port:** yes


## How it compares

Compared against 839 inverters from 6 to 12 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 97.9% | 97.5% | Strong - top 20% | 105 |
| MPPT trackers | 4 | 2 | Strong - top 2% | 2 |
| Max DC input voltage | 1000 V | 800 V | Typical | 135 |
| Weight per kW | 5.1 | 3.0 | Weak - bottom 9% | 746 |
| Warranty | 10 yrs | 5 yrs | Strong - top 19% | 13 |


## Specification


### AC output

- **Rated AC power:** 10 kW
- **Max apparent power:** 11.00 kVA
- **Phases:** Three-phase
- **Nominal AC voltage:** 400 V
- **Max AC current:** 16.5 A
- **Grid frequency:** 50 Hz
- **Power factor:** >0.99 (rated)
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC input power:** 20.00 kW
- **Max DC voltage:** 1000 V
- **MPPT voltage range:** 200 to 950 V
- **Start-up voltage:** 180 V
- **MPPT trackers:** 4
- **Max input current per MPPT:** 20.0 A
- **Max short-circuit current per MPPT:** 30.0 A


### Efficiency

- **European efficiency:** 97.9 %
- **Max efficiency:** 98.4 %
- **CEC efficiency:** 97.5 %


### Battery

- **Battery port:** Yes
- **Battery voltage:** 180-800V
- **Max charge current:** 50.0 A
- **Max discharge current:** 50.0 A
- **Grid-forming:** Yes


### Physical

- **Dimensions:** 604 × 558 × 252 mm
- **Weight:** 51.0 kg
- **Enclosure:** IP66
- **Cooling:** forced-air
- **Noise:** 50 dB
- **Operating temperature:** -30 to 60 °C
- **Max altitude:** 4000 m


### Connectivity and protection

- **Interfaces:** Wi-Fi, Ethernet, Bluetooth, Display
- **Protocols:** WiFi, LAN/Ethernet, CAN, RS485, GPRS, Modbus RTU, Modbus TCP, MQTT, Bluetooth
- **Protection:** DC switch, Surge protection


### Warranty and certificates

- **Warranty:** 10 years
- **Certifications:** CE, TÜV, IEC 62109, IEC 62619, EN 50549-1, VDE-AR-N 4105, EN50549-10:2022, C10/11:2021, TOR Erzeuger Type A:2022, OVE-Richtlinie R25:2020, VDE4105:2018, VDE0124-100:2020, NC RFG, PTPiREE, NRS097-2-1, IEC/EN61000-6-1/2/3/4, IEC/EN62109-1:2010, IEC/EN62109-2:2011, IEC/EN62477-1:2022, IEC63000:2018, UN 38.3, IEC 63056, VDE 2510-50, RoHS


### Pros

- **Single-vendor, one-cable platform** - The inverter, LiFePO4 battery, and smart-grid controller are certified as a single system with one DC cable and one communication bus. This eliminates the warranty disputes typical of multi-vendor hybrid setups, where split responsibility across component suppliers is a common source of claim disputes.
- **Scalable storage without capacity derating** - BMS AutoSync technology with active module balancing allows new battery modules to be added years later without capping the whole cluster's capacity to the weakest cell - unlike many competing LiFePO4 storage systems, where mixing module generations forces a capacity downgrade.
- **Self wake-up after deep discharge** - The Zero-Truck-Roll Wake-Up function restarts the BMS from the grid or PV without a technician site visit, cutting service costs and system downtime - a common deep-discharge issue that typically requires a physical service call on other systems.
- **Native DACH and smart-grid readiness** - Out-of-the-box support for SG Ready, EEBUS, OCPP 2.0, and §14a EnWG enables integration with heat pumps, EV chargers, and dynamic tariffs without extra gateways - a meaningful edge in the German-speaking market versus competitors requiring external integration modules.
- **Faster installer deployment time** - The single DC cable and single communication bus reduce installation time compared to systems assembled from a separate inverter, battery, and EMS controller from different vendors, lowering labor cost per project.


### Cons

- **Limited independent verification of key features** - BMS AutoSync and Zero-Truck-Roll Wake-Up are described only in manufacturer marketing materials - no publicly available independent testing or detailed Wattsonic technical documentation confirms these mechanisms, meaning installers should do additional due diligence before large-scale deployment.


## About this series

The WattMatic AIO Home series is a fully integrated, single-certified hybrid system combining a three-phase inverter, LiFePO4 energy storage, and a smart-grid controller, engineered specifically for the European market and local grid-connection requirements. Rather than stitching together components from multiple vendors, installers get one ready-to-deploy platform with a single DC link and one communication bus, drastically cutting commissioning time and avoiding the warranty headaches that come with multi-brand systems. At the core of the platform is **AutoSync BMS technology with module-level active balancing**, which lets homeowners add new battery modules years later without capping the entire cluster's usable capacity to the weakest, aged module. Equally notable is the **Zero-Truck-Roll Wake-Up** feature, which solves the industry-wide deep-discharge failure mode: the system revives the BMS from grid or PV power on its own, with no technician dispatch required. The series offers native SG Ready, EEBUS, and OCPP 2.0 support along with §14a EnWG compliance, making it ready to coordinate with heat pumps, EV chargers, and dynamic tariff programs out of the box. It's built for installers and single-family or light-commercial projects that value **installation simplicity**, **reliability across demanding climate conditions**, and **long-term storage scalability** without costly service visits.


## Questions


### How does the WattMatic AIO Home differ from a standard inverter with a separately purchased battery storage?

The WattMatic AIO Home is a single certified hybrid system combining a three-phase inverter, LiFePO4 battery storage, and a smart-grid controller into one platform from a single manufacturer, with one DC cable and one communication bus. With mixed-brand setups, installers have to reconcile separate warranties and communication protocols, which extends installation time and complicates service. Here everything works out of the box as one product.


### What is BMS AutoSync technology, and can it expand the battery storage after years of use?

BMS AutoSync is an active cell-balancing technology that lets you add new LiFePO4 modules to an existing battery stack even after several years of operation. Thanks to active balancing, new and older modules work together without the entire cluster's capacity dropping to the level of the weakest cell, which is a common problem in systems without this technology when expanding storage.


### What happens if the WattMatic AIO Home battery fully discharges - do I need to call a technician?

No, the Zero-Truck-Roll Wake-Up feature automatically wakes the BMS after a deep discharge, drawing power from the grid or the PV array, without requiring an on-site service visit. This solves one of the most common battery storage issues, where a full discharge previously required a costly technician callout with specialized equipment.


### Is the WattMatic AIO Home compliant with §14a EnWG and European grid connection requirements?

Yes, the series natively supports the §14a EnWG standard, as well as SG Ready, EEBUS, and OCPP 2.0, making it compliant with current European grid connection requirements, including regulations governing load and feed-in management. This allows the system to be safely connected to the grid without additional compliance modules.


### Can the WattMatic AIO Home inverter integrate with a heat pump and an EV charger?

Yes, thanks to built-in support for SG Ready, EEBUS, and OCPP 2.0 protocols, the system communicates natively with heat pumps and EV chargers without needing additional gateways or controllers. This also enables participation in dynamic tariff programs, helping optimize energy costs for a household or light commercial site.


### Who is the WattMatic AIO Home series designed for - only single-family homes?

The series is primarily aimed at installers and investors working with single-family homes, but it also suits light commercial buildings. Its design as a single integrated three-phase system, simple installation via one DC cable, and scalable battery storage without additional service costs make it attractive for both small businesses and larger households.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/WattMatic-AIO-Datasheet-7b50653f9fb2.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [SolarEdge SE10000H](https://comparepv.com/inverter/solaredge-se10000h) | 10 kW | 99.0% |  | 19.6 kg | +1.1 pp efficiency, 31.4 kg lighter |
| [Sigenergy SigenStor Neo EC 10.0 TP](https://comparepv.com/inverter/sigenergy-sigenstor-neo-ec-10-0-tp) | 10 kW | 98.7% |  | 30.0 kg | +0.8 pp efficiency, 21.0 kg lighter |
| [Sigenergy Sigen Hybrid 10.0 TP2](https://comparepv.com/inverter/sigenergy-sigen-hybrid-10-0-tp2) | 10 kW | 98.5% | 2 | 19.5 kg | +0.6 pp efficiency, -2 MPPT, 31.5 kg lighter |
| [HYXiPower HYX-H10K-HSA2](https://comparepv.com/inverter/hyxipower-hyx-h10k-hsa2) | 10 kW | 98.2% |  | 38.0 kg | 13.0 kg lighter |
| [HYXiPower HYX-H10K-HT](https://comparepv.com/inverter/hyxipower-hyx-h10k-ht) | 10 kW | 98.2% | 2 | 34.0 kg | -2 MPPT, 17.0 kg lighter |
| [Growatt MOD 10KTL3-XH](https://comparepv.com/inverter/growatt-mod-10ktl3-xh) | 10 kW | 98.1% | 2 | 14.0 kg | -2 MPPT, 37.0 kg lighter |
| [Growatt MOD 10KTL3-HU](https://comparepv.com/inverter/growatt-mod-10ktl3-hu) | 10 kW | 98.1% | 3 | 20.0 kg | -1 MPPT, 31.0 kg lighter |
| [Huawei SUN2000-10KTL-M1](https://comparepv.com/inverter/huawei-sun2000-10ktl-m1) | 10 kW | 98.1% | 2 | 17.0 kg | -2 MPPT, 34.0 kg lighter |


---

Source: https://comparepv.com/inverter/wattsonic-matic-10kw-50a

