---
title: "Wattsonic CISION-36K-3PH Hybrid Inverter: Specs & Datasheet | ComparePV"
description: "Wattsonic CISION-36K-3PH 36 kW hybrid inverter. Specs: 97.5% European efficiency, 4 MPPT, 1000 V max DC input, 80.0 kg, 10 yrs warranty."
source: "https://comparepv.com/inverter/wattsonic-cision-36k-3ph"
updated: 2026-11-14
---

# Wattsonic CISION-36K-3PH


## Identity

- **Manufacturer:** Wattsonic
- **Model:** CISION-36K-3PH
- **Series:** CISION
- **Rated AC power:** 36 kW
- **Type:** Hybrid
- **Phases:** Three-phase
- **Battery port:** yes


## How it compares

Compared against 552 inverters from 30 to 100 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 97.5% | 98.2% | Weak - bottom 12% | 354 |
| MPPT trackers | 4 | 4 | Typical | 104 |
| Max DC input voltage | 1000 V | 1100 V | Typical | 298 |
| Weight per kW | 2.2 | 1.2 | Weak - bottom 7% | 482 |
| Warranty | 10 yrs | 5 yrs | Strong - top 14% | 8 |


## Specification


### AC output

- **Rated AC power:** 36 kW
- **Max apparent power:** 39.60 kVA
- **Phases:** Three-phase
- **Nominal AC voltage:** 400 V
- **Grid frequency:** 50 Hz
- **Power factor:** 0.8 leading ... 0.8 lagging
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC input power:** 54.00 kW
- **Max DC voltage:** 1000 V
- **MPPT voltage range:** 200 to 950 V
- **MPPT trackers:** 4
- **Max input current per MPPT:** 32.0 A
- **Max short-circuit current per MPPT:** 40.0 A


### Efficiency

- **European efficiency:** 97.5 %
- **Max efficiency:** 98.2 %


### Battery

- **Battery port:** Yes
- **Battery voltage:** 200-800V DC
- **Max charge current:** 100.0 A
- **Max discharge current:** 100.0 A
- **Backup power:** 50.00 kW
- **Grid-forming:** Yes


### Physical

- **Dimensions:** 810 × 590 × 285 mm
- **Weight:** 80.0 kg
- **Enclosure:** IP66
- **Cooling:** forced-air
- **Noise:** 65 dB
- **Operating temperature:** -30 to 60 °C
- **Installation:** Outdoor only


### Connectivity and protection

- **Protocols:** CAN 2.0, Modbus TCP, EEBUS, OpenAPI, OCPP 1.6/2.0, SunSpec, TLS 1.3, OAuth 2.0, MQTT
- **Protection:** AFCI, DC switch


### Warranty and certificates

- **Warranty:** 10 years
- **Certifications:** IEC 62109-1, IEC 62109-2, IEC 62619, UN 38.3, IEC 62133-2, EN IEC 63027:2023, IEC 62040-3, EN 61000-6-1/2/3/4, EN 50549-1, VDE-AR-N 4105, G99, CEI 0-21, UNE 217002, NRS 097-2-1, AS/NZS 4777.2, CE, UKCA


### Pros

- **Single all-SiC core handles 5 energy paths** - The transformerless all-SiC architecture integrates PV, storage, generator, grid, and backup power in one unit without an external ATS. This means fewer failure points and faster commissioning compared to conventional C&I setups that require a separate ATS switch.
- **Dual-inverter redundancy in one enclosure** - The system supports two inverters running in parallel within the same enclosure, so if one fails, the other takes over the full load without interrupting operation. For logistics sites and EV fleets, where downtime is costly, this is a concrete advantage over units lacking built-in redundancy.
- **Native generator port with auto-sync** - Physically separated backup and grid terminals eliminate the risk of switching misconfiguration, a common source of installation errors in hybrid C&I systems that lack a dedicated generator port.
- **Modular DC EV charger, no rework needed** - The EV DC charging capacity can be expanded step by step within the same enclosure and architecture, lowering fleet expansion costs over time - competing solutions typically require separate charging infrastructure.
- **LFP storage scalable beyond 1 MWh** - Cascadable scaling of the modular LFP storage beyond one megawatt-hour allows for a single supplier and a single warranty when expanding the installation, reducing compatibility risk from mixing components across vendors.


### Cons

- **Short market track record in C&I all-SiC segment** - The transformerless all-SiC hybrid C&I inverter segment has only matured rapidly since 2025 (with similar launches from Solinteg, Solis, Fox ESS, Kaco, GoodWe, Sigenergy), so CISION lacks the multi-year industrial-grade track record that older, established tier-1 platforms have.
- **No publicly available pricing or certification data** - Wattsonic's official sources do not openly disclose pricing or detailed certifications for the CISION series, making it harder for integrators to directly compare deployment cost (e.g., cost per kWh) against competing C&I systems with transparent pricing policies.


## About this series

The Wattsonic CISION series is an outdoor commercial and industrial hybrid energy storage system that unites solar, battery, generator, grid, and backup power within a single enclosure. At its core sits **one transformerless all-SiC power stage** that drives five independent energy paths without requiring an external ATS - a genuine relief for integrators working on industrial and commercial installations, where every extra component is another point of failure. The inverter stands out with a **native generator port** featuring auto-sync, plus physically separated backup and grid terminals that eliminate the risk of misconfigured transfer switching. The modular LFP battery scales in cascading steps beyond a megawatt-hour, and the platform supports **parallel dual-inverter redundancy** within the same enclosure - if one unit fails, the other takes over the full rated load without interrupting operation. On top of that comes a **modular DC fast charger for electric vehicles**, expandable in stages without rewiring the site, all orchestrated through the WattDesk platform with local-first control and optional cloud oversight. This is a solution built for fleet operators, logistics hubs, and commercial sites that want a single supplier, a single warranty, and an architecture ready to grow.


## Questions


### How is the Wattsonic CISION series different from a standard hybrid inverter with energy storage?

CISION combines five independent energy paths - solar PV, storage, generator, grid, and backup power - in a single enclosure without an external ATS switch. Thanks to one transformerless all-SiC core, integrators don't need to add extra components, reducing the number of potential failure points in industrial or commercial installations.


### Do you need a separate ATS switch to connect a generator to the CISION series?

No. CISION has a native generator port with automatic synchronization, so a generator can be connected directly without an additional ATS switch. The system manages source switching itself, reducing component count and the risk of misconfigured islanding operation.


### What happens if one inverter fails in a redundant CISION configuration?

The CISION series supports two inverters operating in parallel within the same enclosure. If one fails, the other automatically takes over the full load without interrupting the installation's operation. This redundancy is especially valuable for logistics and commercial sites where downtime has real costs.


### Can the energy storage in CISION be expanded later on?

Yes, the modular LFP-based storage can be cascaded up to over one megawatt-hour without replacing the entire system. This lets you start with a smaller installation and add modules as the site's energy needs grow.


### Can EV charging be added to CISION without rebuilding the installation?

Yes. The CISION series includes a modular DC EV charger that can be expanded in stages, adding charging points without rewiring the entire electrical installation. This matters for fleet operators planning a gradual shift to electric vehicles.


### How is the Wattsonic CISION system managed day to day?

The system is managed through the WattDesk platform, which offers local control plus optional cloud monitoring. This allows operators to track performance, plan source switching, and remotely diagnose the installation's status without an on-site visit.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/WattCision-CI-Datasheet-3224dd9aa575.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [Afore AF36K-TH](https://comparepv.com/inverter/afore-af36k-th) | 36 kW | 98.2% | 4 | 70.0 kg | +0.7 pp efficiency, 10.0 kg lighter |
| [Growatt MID 36K-HU](https://comparepv.com/inverter/growatt-mid-36k-hu) | 36 kW | 97.2% |  | 48.0 kg | 32.0 kg lighter |
| [SolaX X3-AELIO-36K](https://comparepv.com/inverter/solax-x3-aelio-36k) | 36 kW | 97.2% | 6 | 105.0 kg | +2 MPPT, 25.0 kg heavier |
| [Growatt WIT 36K-XHU](https://comparepv.com/inverter/growatt-wit-36k-xhu) | 36 kW |  | 4 | 90.0 kg | 10.0 kg heavier |
| [PowMr SOLXPOW X4-36K](https://comparepv.com/inverter/powmr-solxpow-x4-36k) | 36 kW |  |  | 72.0 kg | 8.0 kg lighter |
| [Livoltek HP3-35KL1](https://comparepv.com/inverter/livoltek-hp3-35kl1) | 35 kW | 98.0% | 3 | 80.0 kg | -1.0 kW, +0.5 pp efficiency, -1 MPPT |
| [Deye SUN-35K-SG01HP3-EU-BM3](https://comparepv.com/inverter/deye-sun-35k-sg01hp3-eu-bm3) | 35 kW | 97.0% |  | 80.0 kg | -1.0 kW, -0.5 pp efficiency |
| [Deye SUN-35K-SG02HP3-EU-BM3-P](https://comparepv.com/inverter/deye-sun-35k-sg02hp3-eu-bm3-p) | 35 kW | 97.0% |  | 65.0 kg | -1.0 kW, -0.5 pp efficiency, 15.0 kg lighter |


---

Source: https://comparepv.com/inverter/wattsonic-cision-36k-3ph

