---
title: "TSUN TSOL-MX2250 Microinverter: Specs & Datasheet | ComparePV"
description: "TSUN TSOL-MX2250 2.25 kW microinverter. Specs: 96.7% European efficiency, 4 MPPT, 60 V max DC input, 5.5 kg, 12 yrs warranty."
source: "https://comparepv.com/inverter/tsun-tsol-mx2250"
updated: 2026-11-14
---

# TSUN TSOL-MX2250


## Identity

- **Manufacturer:** TSUN
- **Model:** TSOL-MX2250
- **Series:** GEN3 Microinverter 4-in-1
- **Rated AC power:** 2.25 kW
- **Type:** Microinverter
- **Phases:** Single-phase


## How it compares

Compared against 251 microinverters. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 96.7% | 96.0% | Strong - top 5% | 1 |
| MPPT trackers | 4 | 2 | Strong - top 18% | 11 |
| Max DC input voltage | 60 V | 60 V | Typical | 72 |
| Weight per kW | 2.4 | 3.5 | Strong - top 10% | 25 |
| Warranty | 12 yrs | 12 yrs | Typical | 60 |


## Specification


### AC output

- **Rated AC power:** 2.25 kW
- **Phases:** Single-phase
- **Nominal AC voltage:** 230 V
- **Max AC current:** 11.2 A
- **Grid frequency:** 50 Hz
- **Power factor:** 0.8 Leading ... 0.8 Lagging
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC voltage:** 60 V
- **MPPT voltage range:** 16 to 60 V
- **Start-up voltage:** 22 V
- **MPPT trackers:** 4
- **Max input current per MPPT:** 18.0 A
- **Max short-circuit current per MPPT:** 25.0 A


### Efficiency

- **European efficiency:** 96.7 %
- **Max efficiency:** 97.0 %


### Physical

- **Dimensions:** 261 × 331 × 44 mm
- **Weight:** 5.5 kg
- **Enclosure:** IP67
- **Cooling:** natural
- **Operating temperature:** -40 to 65 °C
- **Max humidity:** 100 %
- **Max altitude:** 2000 m


### Connectivity and protection

- **Interfaces:** Wi-Fi, Bluetooth
- **Protocols:** WiFi, Bluetooth, RS485


### Warranty and certificates

- **Warranty:** 12 years


### Pros

- **4 independent MPPT channels per unit** - Each of the four panels has its own MPPT tracker, keeping it at its optimal operating point even under partial shading or soiling of a neighboring module. In string inverters, such a condition drags down the whole string's output, whereas here it only affects one channel.
- **High peak efficiency up to 97.0%** - Per the manufacturer's datasheet (tsun-ess.com), the GEN3 4-in-1 series reaches a peak efficiency of up to 97.0% at 1600-2250W output, a competitive figure among 4-MPPT microinverters on the market.
- **IP67 rating and wide operating temperature range** - A sealed IP67 enclosure and an operating range of -40°C to +65°C, confirmed in TSUN's documentation, allow outdoor installation in harsh climates without additional protection.
- **4:1 component count reduction** - A single inverter serves four panels, cutting the number of devices, DC/AC wiring, and mounting points compared with single- or dual-panel microinverters, speeding up installation and lowering BoS costs.
- **Flexible connectivity: Wi-Fi, Bluetooth, RS485, 4G** - The availability of four communication variants enables real-time production monitoring regardless of the site's network infrastructure, which is uncommon at this microinverter price point.


### Cons

- **Standard 12-year warranty - shorter than market leaders** - Manufacturer documentation lists a standard warranty term of 12 years, while segment leaders in microinverters (Enphase, APsystems) offer 20-25 years as standard. Extending the term requires additional configuration or cost.
- **A single unit failure disables four panels** - In the 4-in-1 architecture, a failure of one inverter unit disconnects the output of four panels at once, unlike single-panel microinverters, where a failure affects only one module.


## About this series

The GEN3 Microinverter 4-in-1 series from TSUN is built to let installers connect **four solar panels to a single microinverter**, cutting down on the number of components in the system and shortening installation time. Thanks to **four independent MPPT channels**, each panel operates at its own optimal power point regardless of shading or soiling on neighboring modules, which meaningfully boosts energy yield compared to traditional string inverters. The build offers **strong resistance to outdoor conditions** and stable operation in harsh environments, thanks to a sealed enclosure designed for exterior mounting. A **plug & play** installation approach makes this series especially appealing to installers looking for straightforward setup and to project owners who value fast deployment. Available communication options - Wi-Fi, RS485, 4G, and Bluetooth - enable **flexible real-time monitoring of energy production** regardless of the network infrastructure available on site. This solution fits well in both residential rooftop installations and smaller commercial systems, where safety (low DC voltage at the panel level), modularity, and the ability to service individual channels without affecting the rest of the system are all key priorities.


## Questions


### How many solar panels can be connected to a single GEN3 4-in-1 microinverter?

Each unit in the GEN3 Microinverter 4-in-1 series can connect up to four solar panels at once. Every panel runs on its own independent MPPT channel, so output from one module is not limited by shading or soiling on neighboring panels. This architecture reduces the number of components in the installation and shortens installation time compared to classic single-channel microinverters.


### Can TSUN GEN3 4-in-1 microinverters operate in harsh weather, such as winter conditions?

Yes, the microinverter enclosure carries an IP67 rating, providing full protection against dust and water ingress, and the manufacturer specifies operation across a wide temperature range covering both severe cold and high summer temperatures. This makes the GEN3 4-in-1 series suitable for outdoor mounting directly beneath the panels, without extra protection against rain or temperature swings.


### What is the maximum power output of the GEN3 Microinverter 4-in-1 series?

Depending on the chosen model within the series, rated output power ranges from roughly 1600W to 2250W. This allows installers to match a specific variant to the panel wattage used in the array, while still supporting four modules per unit and maintaining high conversion efficiency.


### What communication and monitoring options does the GEN3 4-in-1 series offer?

GEN3 4-in-1 microinverters are available with Wi-Fi, RS485, 4G, and Bluetooth communication variants. This lets installers pick a data transmission method matching the network infrastructure on site - from simple Wi-Fi in a residential home, to RS485 in commercial installations, to 4G in locations without local network access. Energy production monitoring is done in real time via the manufacturer's app or platform.


### How does a 4-in-1 microinverter differ from a traditional string inverter?

In a string inverter, panels are wired in series, so shading or soiling on one module reduces output for the entire string. In the GEN3 4-in-1 series, each of the four panels has its own independent MPPT channel, so it operates at its optimal power point regardless of the condition of the other modules. Additionally, low DC voltage on the panel side improves safety, and a fault on one channel does not shut down the whole system.


### Is installing a GEN3 4-in-1 microinverter difficult, and does it require special tools?

The series is built around a plug & play design, enabling fast, intuitive wiring without complex cabling. Since one unit handles four panels, installers need fewer components and less mounting time than with four separate single-channel microinverters. Configuring the communication variant (Wi-Fi, RS485, 4G, or Bluetooth) is typically done through the manufacturer's app.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/datasheetgen3-microinverter-4-in-1-b95d2e6dada8.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [Deye SUN-M225G4-EU-Q0-I](https://comparepv.com/inverter/deye-sun-m225g4-eu-q0-i) | 2.25 kW | 96.0% | 4 | 5.0 kg | -0.7 pp efficiency |
| [Deye SUN-S225G4-EU-Q0](https://comparepv.com/inverter/deye-sun-s225g4-eu-q0) | 2.25 kW | 96.0% | 2 | 4.7 kg | -0.7 pp efficiency, -2 MPPT |
| [Growatt NEO 2250M-X2](https://comparepv.com/inverter/growatt-neo-2250m-x2) | 2.25 kW |  | 4 | 5.1 kg | Similar on paper |
| [SAJ M2-2.25K-S4](https://comparepv.com/inverter/saj-m2-2-25k-s4) | 2.25 kW |  | 4 | 5.8 kg | Similar on paper |
| [SolaX X1-Micro 2250 G2](https://comparepv.com/inverter/solax-x1-micro-2250-g2) | 2.25 kW |  | 4 | 5.2 kg | Similar on paper |
| [Deye SUN-M220G4-EU-Q0-I](https://comparepv.com/inverter/deye-sun-m220g4-eu-q0-i) | 2.2 kW | 96.0% | 4 | 5.0 kg | -0.7 pp efficiency |
| [Deye SUN-S220G4-EU-Q0](https://comparepv.com/inverter/deye-sun-s220g4-eu-q0) | 2.2 kW | 96.0% | 2 | 4.7 kg | -0.7 pp efficiency, -2 MPPT |
| [SAJ M2-2.2K-S4](https://comparepv.com/inverter/saj-m2-2-2k-s4) | 2.2 kW |  | 4 | 5.8 kg | Similar on paper |


---

Source: https://comparepv.com/inverter/tsun-tsol-mx2250

