---
title: "TSUN TSOL-MS400 Microinverter: Specs & Datasheet | ComparePV"
description: "TSUN TSOL-MS400 0.4 kW microinverter. Specs: 96.5% European efficiency, 1 MPPT, 60 V max DC input, 2.1 kg, 12 yrs warranty."
source: "https://comparepv.com/inverter/tsun-tsol-ms400"
updated: 2026-11-14
---

# TSUN TSOL-MS400


## Identity

- **Manufacturer:** TSUN
- **Model:** TSOL-MS400
- **Series:** GEN3 Microinverter 1-in-1
- **Rated AC power:** 0.4 kW
- **Type:** Microinverter
- **Phases:** Single-phase


## How it compares

Compared against 251 microinverters. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 96.5% | 96.0% | Strong - top 23% | 8 |
| MPPT trackers | 1 | 2 | Weak - bottom 15% | 153 |
| Max DC input voltage | 60 V | 60 V | Typical | 72 |
| Weight per kW | 5.2 | 3.5 | Weak - bottom 16% | 209 |
| Warranty | 12 yrs | 12 yrs | Typical | 60 |


## Specification


### AC output

- **Rated AC power:** 0.4 kW
- **Phases:** Single-phase
- **Nominal AC voltage:** 230 V
- **Max AC current:** 2.0 A
- **Grid frequency:** 50 Hz
- **Power factor:** >0.99 Default, 0.8 Leading ... 0.8 Lagging
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC voltage:** 60 V
- **MPPT voltage range:** 16 to 60 V
- **Start-up voltage:** 22 V
- **MPPT trackers:** 1
- **Max input current per MPPT:** 14.0 A
- **Max short-circuit current per MPPT:** 20.0 A


### Efficiency

- **European efficiency:** 96.5 %
- **Max efficiency:** 96.7 %


### Physical

- **Dimensions:** 225 × 164 × 30 mm
- **Weight:** 2.1 kg
- **Enclosure:** IP67
- **Cooling:** natural
- **Operating temperature:** -40 to 65 °C
- **Max humidity:** 100 %
- **Max altitude:** 2000 m


### Connectivity and protection

- **Interfaces:** Wi-Fi, Bluetooth
- **Protocols:** WiFi, Bluetooth, RS485


### Warranty and certificates

- **Warranty:** 12 years


### Pros

- **Independent MPPT per panel** - A dedicated MPPT tracker for each module eliminates the weakest-link effect common in series strings - under partial shading or uneven irradiance, the remaining panels keep operating at full output, unlike traditional string-level power optimizers.
- **Low-voltage DC side - inherent safety** - Unlike string inverters operating at 600-1000V DC, the 1-in-1 microinverter runs at a low, user-safe voltage, enabling self-installation without electrical certification - a key advantage for the plug-and-play/balcony solar segment.
- **IP67 fanless enclosure** - A die-cast, resin-filled enclosure rated IP67 enables passive heat dissipation and resistance to moisture and dust without mechanical fans, reducing the risk of mechanical failures typical of active cooling systems.
- **Flexible daisy-chain/trunk cable wiring** - Units can be connected via daisy-chain or trunk cable configurations, allowing the system to scale from a single balcony panel to a full rooftop AC-module installation without changing the wiring architecture.
- **Remote Wi-Fi/Bluetooth monitoring with LoM protection** - Built-in wireless connectivity plus Loss of Mains (LoM) protection improve grid-interaction safety and enable real-time production monitoring via a mobile app, without additional communication hardware.


### Cons

- **Standard warranty shorter than segment leaders** - The GEN3 1-in-1 series ships with a standard 12-year warranty (extendable), while segment leaders in microinverters (Enphase IQ8, APsystems) offer a 20-25 year base warranty - this may affect perceived investment durability over the PV system's full lifecycle.
- **Limited output power for high-wattage panels** - Maximum unit output power (roughly 400-500W depending on variant) may not fully utilize modern panels rated above 500-600Wp, so a 1:1 panel-to-microinverter pairing can cap the yield achievable from the highest-power modules on the market.
- **Higher unit cost on larger rooftop installations** - The 1-in-1 architecture (one microinverter per panel) results in higher BoS cost per kWp on large rooftop installations compared to string inverters or multi-MPPT microinverters (e.g., 2-in-1), where electronics cost is spread across more panels.


## About this series

The GEN3 Microinverter 1-in-1 series from TSUN is a module-level inverter built for a single solar panel, giving every module its own independent power optimization. Thanks to **dedicated MPPT for every panel**, the array keeps producing at full potential even under partial shading, uneven irradiance, or mismatched mounting angles - solving the classic problem of string setups, where one underperforming panel drags down the whole string's output. The low, safe DC side means the unit carries no high-voltage DC hazard, making it a particularly strong fit for **balcony microinverter setups** and plug-and-play systems installed by homeowners themselves. A die-cast housing with resin potting and IP67 sealing delivers durability in harsh outdoor conditions and stable, fanless heat dissipation. **Wiring flexibility** across daisy-chain, trunk-cable, and balcony configurations lets installers match the cabling to the project at hand, from a single balcony panel to larger rooftop AC-module arrays. Built-in Wi-Fi and Bluetooth connectivity enable **remote app-based monitoring and control**, while integrated loss-of-mains (LoM) protection strengthens grid-interaction safety. It's a solution aimed at installers and homeowners who value straightforward installation and long-term reliability over complex design trade-offs.


## Questions


### How does the TSUN GEN3 1-in-1 microinverter differ from a typical string inverter?

The GEN3 1-in-1 is dedicated to a single panel rather than an entire string. Each module gets its own MPPT, so shading or a fault on one panel does not reduce output from the others. In a conventional string inverter, panels are wired in series and the weakest module limits the whole string, a limitation microinverters avoid.


### Is the GEN3 1-in-1 microinverter suitable for balcony solar installations?

Yes, a low and safe DC side is one of this series' main advantages. The absence of high DC voltage allows safe self-installation without electrical qualifications, which is typically required for plug-and-play balcony micro-systems built around a single panel.


### What is the enclosure rating and operating temperature range of the GEN3 1-in-1?

The housing, made with die-cast resin-filled construction, carries an IP67 rating, meaning resistance to dust and temporary water immersion. The unit is fanless and dissipates heat passively, making it suitable for outdoor mounting directly under the panel regardless of weather conditions.


### Can several GEN3 1-in-1 microinverters be connected in one installation?

Yes, the series supports flexible wiring in daisy-chain and trunk cable configurations, letting multiple units share a single AC line instead of requiring a separate cable run to each device. This allows the system to scale from one balcony panel up to a large rooftop array of AC modules.


### How do I monitor the performance of a TSUN GEN3 1-in-1 microinverter?

The unit has built-in Wi-Fi and Bluetooth, so energy production can be tracked remotely through the TSUN mobile app without extra hardware. The app displays real-time data from each individual panel, making it easy to spot a fault or output drop on a specific module.


### What is LoM protection on the GEN3 microinverter, and is it required?

LoM (Loss of Mains) protection automatically disconnects the inverter from the grid if grid power is lost, preventing islanding. This feature is mandated by grid connection standards in many EU countries and improves safety by protecting service technicians and the grid from uncontrolled back-feed.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/datasheetgen3-microinverter-1-in-1-10f95fc15dce.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [TSUN TSOL-MX400](https://comparepv.com/inverter/tsun-tsol-mx400) | 0.4 kW | 96.5% | 1 | 2.1 kg | Similar on paper |
| [Deye SUN-M40G4-EU-Q0-I](https://comparepv.com/inverter/deye-sun-m40g4-eu-q0-i) | 0.4 kW | 96.0% | 1 | 1.9 kg | -0.5 pp efficiency |
| [Hoymiles HMS-400-1WB](https://comparepv.com/inverter/hoymiles-hms-400-1wb) | 0.4 kW |  | 1 | 1.8 kg | Similar on paper |
| [Sigenergy SigenMicro 400](https://comparepv.com/inverter/sigenergy-sigenmicro-400) | 0.4 kW |  |  | 2.8 kg | Similar on paper |
| [Envertech EVT400](https://comparepv.com/inverter/envertech-evt400) | 0.4 kW |  |  | 2.1 kg | Similar on paper |
| [Hoymiles HMS-400-1T](https://comparepv.com/inverter/hoymiles-hms-400-1t) | 0.4 kW |  | 1 | 1.8 kg | Similar on paper |
| [HYXiPower HYX-M400-S / HYX-M400-SW](https://comparepv.com/inverter/hyxipower-hyx-m400-s-hyx-m400-sw) | 0.4 kW |  | 1 | 1.7 kg | Similar on paper |
| [Enphase IQ9N-A-US/IQ9N-A-DOM-US @ 208 V](https://comparepv.com/inverter/enphase-iq9n-a-us-iq9n-a-dom-us-208-v) | 0.41 kW |  | 1 | 1.1 kg | 1.0 kg lighter |


---

Source: https://comparepv.com/inverter/tsun-tsol-ms400

