---
title: "TSUN TSOL-MH2000 Hybrid Inverter: Specs & Datasheet | ComparePV"
description: "TSUN TSOL-MH2000 2 kW hybrid inverter. Specs: 96.7% European efficiency, 4 MPPT, 60 V max DC input, 8.0 kg."
source: "https://comparepv.com/inverter/tsun-tsol-mh2000"
updated: 2026-11-14
---

# TSUN TSOL-MH2000


## Identity

- **Manufacturer:** TSUN
- **Model:** TSOL-MH2000
- **Series:** TSOL-MH2000
- **Rated AC power:** 2 kW
- **Type:** Hybrid
- **Phases:** Single-phase
- **Battery port:** yes


## How it compares

Compared against 449 inverters up to 3 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 96.7% | 96.9% | Typical | 175 |
| MPPT trackers | 4 | 1 | Strong - top 1% | 1 |
| Max DC input voltage | 60 V | 550 V | Weak - bottom 1% | 323 |
| Weight per kW | 4.0 | 5.5 | Typical | 140 |
| Warranty | - | 5 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 2 kW
- **Phases:** Single-phase
- **Nominal AC voltage:** 230 V
- **Max AC current:** 10.0 A
- **Grid frequency:** 50 Hz
- **Power factor:** 0.8 leading - 0.8 lagging
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC voltage:** 60 V
- **MPPT voltage range:** 16 to 60 V
- **Start-up voltage:** 22 V
- **MPPT trackers:** 4
- **Max input current per MPPT:** 18.0 A
- **Max short-circuit current per MPPT:** 25.0 A


### Efficiency

- **European efficiency:** 96.7 %
- **Max efficiency:** 97.0 %


### Battery

- **Battery port:** Yes
- **Battery voltage:** 43.2 ~ 58.4
- **Max charge current:** 50.0 A
- **Max discharge current:** 50.0 A
- **Backup power:** 2.00 kW
- **Grid-forming:** Yes


### Physical

- **Dimensions:** 320 × 360 × 51 mm
- **Weight:** 8.0 kg
- **Enclosure:** IP65
- **Cooling:** natural
- **Operating temperature:** -40 to 65 °C
- **Max humidity:** 95 %
- **Max altitude:** 2000 m


### Connectivity and protection

- **Interfaces:** Wi-Fi, Bluetooth
- **Protocols:** WiFi, Bluetooth, RS485


### Pros

- **4x MPPT and battery storage in one unit** - The TSOL-MH2000 integrates four independent MPPT trackers plus a battery port in a single enclosure, removing the need for a separate hybrid inverter and external charge controller. This meaningfully reduces install time and BoS component count in retrofit installations.
- **Black start support and off-grid operation** - Bidirectional inverter technology enables both on-grid and off-grid operation with black start from PV or grid, ensuring continuity of power to critical loads during grid outages - a feature rarely found in microinverters of this power class.
- **Zero export mode and dynamic tariff control** - A built-in zero export mode plus dynamic energy price control, confirmed in TSUN's official datasheet, allows the installation to be tailored to local grid regulations without an additional external meter in the base configuration.
- **IP65 enclosure with WiFi/Bluetooth connectivity** - The IP65 ingress protection rating confirmed in the manufacturer's datasheet allows facade or balcony-rail mounting without additional weatherproofing, while WiFi and Bluetooth connectivity with the mobile app enable real-time remote monitoring.
- **Flexible compatibility and parallel operation** - Support for both LiFePO4 and lead-acid batteries, combined with parallel operation across single- and three-phase installations, makes the series a scalable solution - from small balcony PV setups to whole-home energy storage retrofits.


### Cons

- **Output capped at 800 W in some countries** - Despite a 2000 W rated output, TSUN's official datasheet includes a footnote stating output is software-limited to 800 W in certain countries due to local grid regulations, meaning the device's full potential may not be available depending on the market.
- **Narrow battery voltage window (43.2-58.4 V)** - The battery port is designed around 51.2 V LiFePO4 systems with a voltage range of 43.2-58.4 V, which in practice narrows the marketed lead-acid compatibility to specific voltage configurations and may require extra verification for non-standard storage systems.


## About this series

The TSOL-MH2000 series is a hybrid microinverter that combines four independent MPPTs with a battery port in a single, compact enclosure designed for wall or balcony railing mounting. Instead of a traditional inverter-plus-separate-storage setup, the unit autonomously manages surplus solar output, charging the battery and releasing stored energy exactly when it's needed. Thanks to **bidirectional inverter technology**, the system operates in both on-grid and off-grid modes, while **zero export mode** and dynamic tariff control let the installation adapt to local regulations and electricity pricing. A key advantage is **black start support from PV or grid**, which keeps power available even during a grid outage, and a PV-first power bypass mode minimizes downtime. Compatibility with various battery types (LiFePO4, lead-acid) and support for parallel operation across single- and three-phase grids make this microinverter a flexible retrofit solution for single-family homes, balcony PV setups, and small energy storage systems. An **IP65**-rated housing along with WiFi and Bluetooth connectivity and a mobile app simplify outdoor installation and remote monitoring. It's a solid choice for installers looking for a simple, modular way to add energy storage to an existing PV system without replacing the main inverter.


## Questions


### How does the TSUN TSOL-MH2000 differ from a standard PV microinverter?

A conventional microinverter only converts PV DC power to AC and feeds it to the grid. The TSOL-MH2000 also has a built-in battery port and bidirectional inverter technology, so it can charge a battery from PV surplus or the grid and then release that energy when needed. This combines a microinverter and a micro energy storage unit in one compact enclosure, without requiring a separate hybrid inverter installation.


### Can a standard lead-acid battery be used with the TSOL-MH2000, or only LiFePO4?

The unit is compatible with various battery types, including LiFePO4 and lead-acid batteries. This is a major advantage for retrofits, since it lets installers use an existing storage battery or start with a cheaper lead-acid battery and upgrade to LiFePO4 later, all without replacing the microinverter itself.


### Will the TSOL-MH2000 keep power running at home during a grid outage?

Yes, the series supports black start from PV or grid, meaning the system can independently restore power to the building even during a complete grid outage, drawing on stored battery energy or current PV production. A power bypass mode with PV priority further minimizes downtime, keeping critical household loads running without interruption.


### What is zero export mode on the TSOL-MH2000 and when should it be used?

Zero export mode limits how much surplus energy is fed back into the public grid, which is useful in countries or under utility contracts where grid export is restricted, unprofitable, or capped. Combined with dynamic tariff control, the TSOL-MH2000 times battery charging and discharging to current electricity prices, maximizing self-consumption of PV power instead of exporting it for little return.


### Is the TSOL-MH2000 microinverter suitable for a balcony PV setup?

Yes, its compact, lightweight IP65-rated enclosure can be mounted on a facade or balcony railing, making this series a good fit for small balcony PV systems and single-family homes looking for a simple way to add energy storage. Four independent MPPT inputs let it handle panels facing different orientations, while WiFi and Bluetooth connectivity with the mobile app allow remote monitoring of production and battery status.


### Can the TSOL-MH2000 be used in three-phase installations and combined in parallel?

Yes, the microinverter works in both single-phase and three-phase installations, and multiple TSOL-MH2000 units can run in parallel to scale up total PV and storage capacity. This modular approach makes it a practical retrofit for existing PV systems, since the main inverter doesn't need to be replaced and extra units can be added in stages as energy needs grow.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/datasheethybrid-microinverter-en-6a29fd41feca.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [Sigenergy Sigen Hybrid 2.0 SP2](https://comparepv.com/inverter/sigenergy-sigen-hybrid-2-0-sp2) | 2 kW | 97.5% | 2 | 11.5 kg | +0.8 pp efficiency, -2 MPPT, 3.5 kg heavier |
| [Huawei SUN2000L-2KTL](https://comparepv.com/inverter/huawei-sun2000l-2ktl) | 2 kW | 97.0% | 2 | 10.6 kg | -2 MPPT, 2.6 kg heavier |
| [Huawei SUN2000-2KTL-L1](https://comparepv.com/inverter/huawei-sun2000-2ktl-l1) | 2 kW | 96.7% | 2 | 12.0 kg | -2 MPPT, 4.0 kg heavier |
| [FIMER FIM-HY-2.0-SE-A](https://comparepv.com/inverter/fimer-fim-hy-2-0-se-a) | 2 kW | 96.5% | 2 | 14.5 kg | -2 MPPT, 6.5 kg heavier |
| [Easun Power 2KW (Hybrid Inverter/Charger)](https://comparepv.com/inverter/easun-power-2kw-hybrid-inverter-charger) | 2 kW |  | 1 | 11.0 kg | -3 MPPT, 3.0 kg heavier |
| [Easun Power IGrid SV II 2KW](https://comparepv.com/inverter/easun-power-igrid-sv-ii-2kw) | 2 kW |  | 1 | 11.0 kg | -3 MPPT, 3.0 kg heavier |
| [Easun Power 2KW](https://comparepv.com/inverter/easun-power-2kw) | 2 kW |  |  | 8.5 kg | Similar on paper |
| [Afore AF2K-SL-0](https://comparepv.com/inverter/afore-af2k-sl-0) | 2 kW |  |  | 18.5 kg | 10.5 kg heavier |


---

Source: https://comparepv.com/inverter/tsun-tsol-mh2000

