---
title: "Studer xth 5000-24 Off-grid Inverter: Specs & Datasheet | ComparePV"
description: "Studer xth 5000-24 4.5 kW off-grid inverter. Specs: 40.0 kg."
source: "https://comparepv.com/inverter/studer-xth-5000-24"
updated: 2026-11-14
---

# Studer xth 5000-24


## Identity

- **Manufacturer:** Studer
- **Model:** xth 5000-24
- **Series:** Xtender
- **Rated AC power:** 4.5 kW
- **Type:** Off-grid
- **Phases:** Single-phase
- **Battery port:** yes


## How it compares

Compared against 1,005 inverters from 3 to 6 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | - | 97.1% |  |  |
| MPPT trackers | - | 2 |  |  |
| Max DC input voltage | - | 600 V |  |  |
| Weight per kW | 8.9 | 3.9 | Weak - bottom 3% | 940 |
| Warranty | - | 5 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 4.5 kW
- **Max AC power:** 5.00 kW
- **Max apparent power:** 12.00 kVA
- **Phases:** Single-phase
- **Nominal AC voltage:** 230 V
- **Max AC current:** 56.0 A
- **Power factor:** 0.1-1
- **Harmonic distortion (THD):** 2.0 %


### Efficiency

- **Max efficiency:** 94.0 %


### Battery

- **Battery port:** Yes
- **Battery voltage:** 12 Vdc (9.5-17 Vdc) / 24 Vdc (19-34 Vdc) / 48 Vdc (38-60 Vdc)
- **Grid-forming:** Yes


### Physical

- **Dimensions:** 230 × 300 × 500 mm
- **Weight:** 40.0 kg
- **Cooling:** natural
- **Noise:** 40 dB
- **Operating temperature:** -20 to 55 °C


### Connectivity and protection

- **Protocols:** CAN, RS485, RS232


### Warranty and certificates

- **Certifications:** EN/IEC 62477-1, EN/IEC 62109-1, EN/IEC 62109-2, EN/IEC 62040-1, EN/IEC 61000-3-2, EN/IEC 61000-3-3, EN/IEC 61000-6-2, EN/IEC 61000-6-4, EN/IEC 62040-2, ISO 9001:2015, ISO 14001:2015


### Pros

- **3-in-1 integration: inverter, charger, transfer switch** - The Xtender combines an inverter, battery charger, and automatic grid/generator transfer switch in a single unit, reducing the number of system components and service points compared to setups built from separate devices.
- **Scalable up to 72 kVA in one system** - Per manufacturer specifications, Xtender units can be paralleled and combined in three-phase configurations up to 9 units on a single communication bus, reaching up to 72 kVA, enabling installations from single-family homes to commercial facilities on the same hardware platform.
- **Smart Boost technology** - Smart Boost allows operation on weak or unstable grid connections by supplementing grid power with battery energy, a significant advantage in regions with limited grid infrastructure where typical hybrid inverters struggle with stability.
- **Clean sine wave via DSP control** - Digital signal processor (DSP) control ensures a clean sinusoidal output waveform, which matters when powering sensitive loads (medical equipment, industrial electronics) compared to modified sine wave inverters.
- **Broad battery technology compatibility** - The series supports multiple battery chemistries (lead-acid, lithium), giving installers flexibility in energy storage choice without needing to change the inverter platform.


### Cons

- **No built-in MPPT - separate controller required** - Unlike some competing all-in-one hybrid inverters, the Xtender lacks an integrated MPPT solar charge controller - connecting PV panels requires an additional VarioTrack or VarioString unit, increasing total system cost and configuration complexity.
- **Premium pricing of Swiss manufacturing** - As a product designed and manufactured in Switzerland, the Xtender is positioned in the premium segment and typically priced higher than comparable models from Asian manufacturers (e.g., Deye, Growatt) with similar power ratings, which can be a barrier for budget installations.


## About this series

The Xtender series consists of multifunctional inverter-chargers from Studer Innotec, built to operate in off-grid, on-grid, and hybrid systems where a single unit must manage energy from PV panels, a generator, the grid, or even wind and hydro sources. Rather than relying on multiple separate components, Xtender integrates an inverter, a battery charger, and a power source transfer switch into one compact unit, which greatly simplifies system design and reduces the number of parts that require servicing. The series' biggest advantage is its **Smart Boost technology**, allowing operation even with limited or unstable grid supply, along with **DSP control that ensures a clean sinusoidal voltage output**. The units are available in single-phase and three-phase variants, and thanks to their modular design, they can be combined into **distributed energy minigrids** reaching power levels in the hundreds of kilowatts, making them an attractive solution not only for single-family homes but also for industrial and commercial facilities. The series also stands out for its **compatibility with a wide range of battery technologies** and rugged construction - versions resistant to harsh environmental conditions (IP54) mean the Xtender performs reliably where standard inverters fall short. It's a solution built for installers seeking flexibility, scalability, and reliability in a single system.


## Questions


### What is Smart Boost technology in Studer Xtender inverters and how does it work in practice?

Smart Boost lets the Xtender support a weak or unstable grid, generator, or genset by drawing additional power from the batteries during peak load moments. This allows the unit to supply loads larger than the input source alone could handle, with the battery covering the difference. It's especially useful where grid power is limited, intermittent, or the generator has restricted capacity.


### How many Xtender inverters can be combined in one installation and what power output can be achieved?

The Xtender series has a modular design, allowing multiple units to be paralleled on the same phase or configured for three-phase operation, forming distributed micro-grids with outputs reaching hundreds of kilowatts. This scales from a single-family home to industrial and commercial installations, without replacing the whole system - just add more Xtender units.


### What types of batteries is the Studer Xtender compatible with?

The Xtender is compatible with a wide range of battery technologies, from traditional lead-acid types (AGM, gel) to lithium batteries with their own BMS communicating via CAN or RS485. Charging parameters and operating profiles can be precisely tailored to the specific battery type, giving installers flexibility when designing the energy storage system.


### Can the Studer Xtender operate in harsh environmental conditions, such as outdoors?

Yes, certain variants of the Xtender series offer an IP54 protection rating, meaning resistance to dust and splashing water. This allows the unit to be installed in locations where standard inverters would require an additional enclosure - for example, technical containers, outdoor cabinets, or industrial sites exposed to moisture and dust.


### What's the difference between single-phase and three-phase Xtender versions, and which should I choose?

The single-phase version suits single-family homes and smaller off-grid installations, where one phase is enough. The three-phase version, built by combining three single-phase units, is needed for facilities with three-phase loads (pumps, motors, industrial machinery) or larger hybrid systems. The choice depends on the type of loads and overall system power, not just house size.


### How does the Xtender deliver a clean sine-wave output, and does it matter for household equipment?

The Xtender uses DSP (digital signal processor) control to generate a clean, stable sine-wave output voltage. This matters for load-sensitive equipment such as medical devices, electronics with switching power supplies, or motors - a clean sine wave reduces the risk of overheating and extends the lifespan of such loads compared with modified-wave inverters.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/Studer_xtender_A4-WEB-v261-970aab682e3e.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [PowMr POW-HVM4.5K-24V](https://comparepv.com/inverter/powmr-pow-hvm4-5k-24v) | 4.5 kW |  |  | 7.5 kg | 32.5 kg lighter |
| [SMA Solar SI6.0H-13](https://comparepv.com/inverter/sma-solar-si6-0h-13) | 4.6 kW |  |  | 63.0 kg | 23.0 kg heavier |
| [PowMr POW-HVM4.2M-24V-N](https://comparepv.com/inverter/powmr-pow-hvm4-2m-24v-n) | 4.2 kW |  |  | 9.5 kg | -0.3 kW, 30.5 kg lighter |
| [Deye SUN-5K-OG03LP1-EU-AM2](https://comparepv.com/inverter/deye-sun-5k-og03lp1-eu-am2) | 5 kW | 96.5% |  | 8.6 kg | +0.5 kW, 31.4 kg lighter |
| [Growatt SPF 5000 ES](https://comparepv.com/inverter/growatt-spf-5000-es) | 5 kW |  | 1 | 12.0 kg | +0.5 kW, 28.0 kg lighter |
| [Growatt SPF 4000T DVM](https://comparepv.com/inverter/growatt-spf-4000t-dvm) | 4 kW |  |  | 42.0 kg | -0.5 kW, 2.0 kg heavier |
| [Growatt SPF 5000T DVM](https://comparepv.com/inverter/growatt-spf-5000t-dvm) | 5 kW |  |  | 47.0 kg | +0.5 kW, 7.0 kg heavier |
| [Growatt SPF 4000T DVM-MPV](https://comparepv.com/inverter/growatt-spf-4000t-dvm-mpv) | 4 kW |  |  | 42.0 kg | -0.5 kW, 2.0 kg heavier |


---

Source: https://comparepv.com/inverter/studer-xth-5000-24

