---
title: "Studer next nx3 Hybrid Inverter: Specs & Datasheet | ComparePV"
description: "Studer next nx3 15 kW hybrid inverter. Specs: 92.0% European efficiency, 2 MPPT, 900 V max DC input, 58.0 kg."
source: "https://comparepv.com/inverter/studer-next-nx3"
updated: 2026-11-14
---

# Studer next nx3


## Identity

- **Manufacturer:** Studer
- **Model:** next nx3
- **Series:** next3
- **Rated AC power:** 15 kW
- **Type:** Hybrid
- **Phases:** Three-phase
- **Battery port:** yes


## How it compares

Compared against 623 inverters from 12 to 30 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 92.0% | 98.0% | Weak - bottom 1% | 464 |
| MPPT trackers | 2 | 2 | Typical | 168 |
| Max DC input voltage | 900 V | 1000 V | Weak - bottom 20% | 478 |
| Weight per kW | 3.9 | 1.8 | Weak - bottom 5% | 572 |
| Warranty | - | 5 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 15 kW
- **Max AC power:** 16.00 kW
- **Max apparent power:** 30.00 kVA
- **Phases:** Three-phase
- **Nominal AC voltage:** 400 V
- **Max AC current:** 102.0 A
- **Grid frequency:** 50 Hz
- **Power factor:** 0.1-1
- **Harmonic distortion (THD):** 1.0 %


### PV input

- **Max DC input power:** 16.00 kW
- **Max DC voltage:** 900 V
- **MPPT voltage range:** 300 to 700 V
- **Start-up voltage:** 200 V
- **MPPT trackers:** 2
- **Max input current per MPPT:** 20.0 A
- **Max short-circuit current per MPPT:** 27.0 A


### Efficiency

- **European efficiency:** 92.0 %
- **Max efficiency:** 97.0 %
- **CEC efficiency:** 93.0 %


### Battery

- **Battery port:** Yes
- **Battery voltage:** 36-68 Vdc
- **Max charge current:** 300.0 A
- **Backup power:** 15.00 kW
- **Grid-forming:** Yes


### Physical

- **Dimensions:** 320 × 450 × 760 mm
- **Weight:** 58.0 kg
- **Enclosure:** IP20
- **Operating temperature:** -20 to 55 °C
- **Max humidity:** 95 %
- **Installation:** Indoor only


### Connectivity and protection

- **Interfaces:** Ethernet
- **Protocols:** RS485 (Modbus), CAN BMS, USB, LAN, RJ45/8


### Warranty and certificates

- **Certifications:** CE, EU Low Voltage Directive (LVD) 2014/35/EU, EU Electromagnetic Compliance (EMC) 2014/30/EU, IEC 62116, IEC 61727, EN 50549-1:2019, VDE-AR-N 4105:2018, EU Commission Regulation 2016/631 (NC RfG), ISO 9001:2015, ISO 14001:2015


### Pros

- **Native three-phase 16/30 kVA topology** - Next3 is a single unit delivering full 400V three-phase output (16 kVA continuous/30 min, 30 kVA for 5 s), whereas many competitors (e.g., Victron MultiPlus-II) require stacking three single-phase units, increasing wiring cost and panel footprint.
- **Dual built-in MPPT, 8+8 kW** - Integrated solar inputs totaling 16 kW (Voc up to 900 Vdc) eliminate the need for an external charge controller, reducing BoS and allowing two independent PV strings with different roof orientations to connect directly.
- **Seamless on-grid/off-grid switching** - The unit provides uninterrupted switching between grid-tied and island mode, making it suitable both for sites without a grid connection and for homes seeking energy autonomy with backup power.
- **Broad battery chemistry compatibility** - Next3 operates on a 48V battery bus and supports multiple battery technologies, from classic lead-acid to lithium, giving installers full freedom to select a storage vendor without manufacturer lock-in.
- **Certified for installation up to 3000 m altitude** - Approval for operation at altitudes up to 3000 m above sea level is uncommon in this segment and opens up mountain and industrial applications, where many Tier-1 inverters cap out around 2000 m.


### Cons

- **Premium pricing vs. mass-market peers** - A single Next3 unit is listed at roughly EUR 16,000 at retail, significantly above a functionally comparable three-unit Victron MultiPlus-II 48/10000-15000 setup (roughly EUR 1,900-2,800 per unit), which may require justifying the premium on cost-sensitive projects.
- **Substantial unit weight (58-72 kg)** - Manufacturer and distributor data report weights ranging from 58 kg to 72 kg depending on variant, which compared to lighter modular single-phase inverters complicates transport and installation without dedicated lifting equipment.
- **Niche service network vs. Tier-1 brands** - Studer is a smaller Swiss manufacturer with less global scale than Victron, SMA, or Huawei, which in practice means fewer local service points and slower spare-parts availability in some regions.


## About this series

The **Studer next3** series is a three-phase hybrid inverter-charger built for installers who need to combine energy storage, backup power, and solar integration in a single unit. What sets the series apart is its **two built-in high-voltage MPPT inputs**, which remove the need for separate charge controllers and allow two independent PV strings to be connected directly, simplifying system design for roofs with complex orientations. Next3 delivers seamless **on-grid and off-grid operation**, making it suitable for installations with no grid access as well as homes and businesses seeking energy autonomy while remaining connected to the public grid. A key advantage is its broad **compatibility with multiple battery technologies**, from classic lead-acid cells to modern lithium storage, giving installers freedom in battery sourcing. The unit can be deployed in demanding conditions, including **installation at altitudes up to 3000 m**, making it an attractive choice for mountain and industrial sites. Its modular design and integration with Studer's remote monitoring portal further simplify servicing and fleet management across geographically dispersed systems.


## Questions


### What is the maximum power and voltage of the MPPT inputs on the Studer next3?

The Studer next3 has two built-in MPPT charge controllers, each rated at around 8 kW, for a combined solar charging power of up to 16 kW. The maximum open-circuit voltage is 900 Vdc, with a maximum short-circuit current of 22 Adc per input. This design lets installers connect two independent strings with different orientations without needing an external charge controller.


### Which batteries are compatible with the Studer next3 inverter?

The next3 is built as a 48V system inverter and supports a wide range of battery technologies, from traditional lead-acid batteries (AGM, gel) to modern lithium battery storage with CAN or RS485 communication. This flexibility lets installers choose a battery supplier independently of the inverter brand, making it easier to optimize cost and equipment availability for a given project.


### Can the Studer next3 operate without a grid connection?

Yes, the next3 supports full off-grid and on-grid operation with automatic, seamless switching between modes. This means the unit works well for mountain homes or industrial buildings with no grid connection, as well as for grid-tied homes looking to increase energy autonomy and rely on battery storage during power outages.


### What warranty does the Studer next3 inverter come with?

The standard manufacturer warranty on the next3 is 10 years from the purchase date. Through the Studer Care+ program, this warranty can be extended to as much as 15 years (10+5), which matters for commercial and industrial installations where long-term reliability and service costs are a key purchasing factor.


### Is the Studer next3 suitable for installation in mountains or at high altitude?

Yes, the next3 can be installed at altitudes up to 3000 meters above sea level, an unusual specification among hybrid inverters. This makes the unit well suited to mountain lodges, relay stations, or industrial sites in challenging high-altitude terrain, where standard inverters can face performance limitations.


### How can the Studer next3 inverter be monitored remotely?

The next3 integrates with Studer's remote monitoring portal, which provides a view of operating parameters, battery state of charge, and solar production from anywhere. This is especially useful for installers managing fleets of geographically dispersed units, since it allows faults to be detected and addressed remotely without an on-site visit.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/Studer_next_nx3_A4-WEB-v282-9929bd1022ee.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [Sigenergy SigenStor Neo EC 15.0 TP](https://comparepv.com/inverter/sigenergy-sigenstor-neo-ec-15-0-tp) | 15 kW | 98.7% |  | 30.0 kg | +6.7 pp efficiency, 28.0 kg lighter |
| [Growatt MID 15KTL3-XH](https://comparepv.com/inverter/growatt-mid-15ktl3-xh) | 15 kW | 98.5% |  | 31.0 kg | +6.5 pp efficiency, 27.0 kg lighter |
| [HYXiPower HYX-H15K-HT](https://comparepv.com/inverter/hyxipower-hyx-h15k-ht) | 15 kW | 98.2% | 2 | 45.0 kg | +6.2 pp efficiency, 13.0 kg lighter |
| [HYXiPower HYX-H15K-HSA2](https://comparepv.com/inverter/hyxipower-hyx-h15k-hsa2) | 15 kW | 98.2% |  | 38.0 kg | +6.2 pp efficiency, 20.0 kg lighter |
| [Growatt MOD 15KTL3-HU](https://comparepv.com/inverter/growatt-mod-15ktl3-hu) | 15 kW | 98.1% | 3 | 20.0 kg | +6.1 pp efficiency, +1 MPPT, 38.0 kg lighter |
| [Huawei SUN2000-15K-MB0](https://comparepv.com/inverter/huawei-sun2000-15k-mb0) | 15 kW | 98.0% | 2 | 21.0 kg | +6.0 pp efficiency, 37.0 kg lighter |
| [Hoymiles HIT-15L-G3/HIT-15L-G3S](https://comparepv.com/inverter/hoymiles-hit-15l-g3-hit-15l-g3s) | 15 kW | 98.0% |  | 41.0 kg | +6.0 pp efficiency, 17.0 kg lighter |
| [Afore AF15K-THA](https://comparepv.com/inverter/afore-af15k-tha) | 15 kW | 98.0% | 2 | 36.0 kg | +6.0 pp efficiency, 22.0 kg lighter |


---

Source: https://comparepv.com/inverter/studer-next-nx3

