---
title: "StecaGrid 3611_2 Grid-tie Inverter: Specs & Datasheet | ComparePV"
description: "StecaGrid 3611_2 3.68 kW grid-tie inverter. Specs: 96.3% European efficiency, 2 MPPT, 750 V max DC input, 14.0 kg."
source: "https://comparepv.com/inverter/steca-stecagrid-3611-2"
updated: 2026-11-14
---

# StecaGrid 3611\_2


## Identity

- **Manufacturer:** Steca
- **Model:** StecaGrid 3611\_2
- **Series:** coolcept fleX
- **Rated AC power:** 3.68 kW
- **Type:** Grid-tie
- **Phases:** Single-phase


## How it compares

Compared against 1,005 inverters from 3 to 6 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 96.3% | 97.1% | Weak - bottom 9% | 646 |
| MPPT trackers | 2 | 2 | Typical | 59 |
| Max DC input voltage | 750 V | 600 V | Typical | 251 |
| Weight per kW | 3.8 | 3.9 | Typical | 470 |
| Warranty | - | 5 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 3.68 kW
- **Max apparent power:** 3.68 kVA
- **Phases:** Single-phase
- **Nominal AC voltage:** 230 V
- **Max AC current:** 16.0 A
- **Grid frequency:** 50 Hz
- **Power factor:** 0.8 capacitive … 0.8 inductive
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC input power:** 3.77 kW
- **Max DC voltage:** 750 V
- **MPPT voltage range:** 125 to 600 V
- **MPPT trackers:** 2
- **Max input current per MPPT:** 13.0 A
- **Max short-circuit current per MPPT:** 15.0 A


### Efficiency

- **European efficiency:** 96.3 %
- **Max efficiency:** 97.0 %


### Physical

- **Dimensions:** 657 × 399 × 222 mm
- **Weight:** 14.0 kg
- **Enclosure:** IP 65
- **Cooling:** forced-air
- **Noise:** 31 dB
- **Operating temperature:** -25 to 60 °C
- **Max humidity:** 100 %


### Connectivity and protection

- **Interfaces:** Ethernet
- **Protocols:** RS-485, Ethernet, Modbus RTU
- **Protection:** DC switch


### Pros

- **One platform across multiple markets** - The coolcept fleX series runs on a shared PCB with preloaded country-specific grid profiles, letting installers deploy the same model across markets and cutting the number of SKUs that need to be stocked.
- **Adjustable power factor 0.8 cap.-ind.** - The power factor range from 0.8 capacitive to 0.8 inductive allows compliance with various grid operator requirements (e.g., German VDE-AR-N 4105), simplifying certification across countries with a single device.
- **IP65 enclosure - indoor and outdoor mounting** - The IP65 protection rating allows outdoor installation, a key advantage for single-family homes with limited technical room space compared to competing IP21/IP54 models that require indoor mounting only.
- **High efficiency up to 97.4%** - Models in this line reach a max. efficiency of 97.0-97.4% and a European efficiency of around 96.1-96.6%, placing them on par with Tier-1 inverters in the same power class (1.5-5.0 kW).
- **Free sunCloud monitoring and dual-MPPT option** - Select models (e.g., StecaGrid 3611-2) feature two independent MPPT trackers, increasing configuration flexibility for panels with different orientations, while the free sunCloud portal eliminates monitoring subscription fees common with other brands.


### Cons

- **Signs of production discontinuation (EOL 2023)** - Independent distributors (e.g., Germany's Solarics) list coolcept fleX and coolcept fleX XL models as End-of-Life since 2023 due to the Katek/Kontron Solar restructuring, citing lack of manufacturer support and spare parts - though the supplied context does not formally confirm discontinuation of the full series.
- **Limited power range, no three-phase variant** - The series covers only single-phase models in roughly the 1.5-5.0 kW range (fleX variant; XL up to 20 kW as a separate line), ruling it out for larger three-phase installations without switching to another product series from this manufacturer.


## About this series

The Steca coolcept fleX series consists of single-phase inverters built as one **versatile electronic platform** on a single circuit board, allowing a single device to cover multiple applications and markets instead of requiring separate models for each country. The key advantage of this line is its **adjustable cos phi power factor** combined with numerous pre-programmed country settings, letting installers deploy the same inverter across different grid regulations, which cuts down on warehouse SKUs and shortens project rollout time. The **IP65-rated enclosure** supports both indoor and outdoor mounting, giving more freedom when choosing an installation spot, especially in single-family homes with limited technical space. The design ensures **even heat distribution**, which translates into stable operation and extended service life even under demanding thermal conditions. The inverters work with the free sunCloud monitoring portal, and select models offer two MPPT trackers, increasing configuration flexibility for arrays with different panel orientations. The coolcept fleX series is a solid choice for installers and residential investors looking for a reliable, compact on-grid solution that combines straightforward installation with real operating cost savings over the lifetime of a PV system.


## Questions


### What is the adjustable cos phi setting on the Steca coolcept fleX inverter and why does it matter?

The adjustable cos phi (power factor) lets the inverter match reactive power output to local grid operator requirements, for example limiting reactive power during peak hours. In practice, this means the same model can be configured for different countries and grid codes without swapping hardware, letting an installer deploy one inverter platform across multiple markets.


### Can the Steca coolcept fleX inverter be installed outdoors?

Yes, the enclosure is rated IP65, meaning it is fully dust-tight and protected against water jets from any direction. This allows mounting on an exterior wall of a house or garage, close to the distribution board, without needing a dedicated indoor utility room. That's a real advantage for single-family homes with limited indoor technical space.


### How many MPPT trackers does the Steca coolcept fleX have, and can it handle panels facing two different directions?

Selected models in the coolcept fleX series feature two independent MPPT trackers, allowing two separate strings, for example with different orientation or tilt, to be tracked for optimal power output independently. This gives installers more flexibility when designing array layouts on roofs with multiple faces, without sacrificing energy yield.


### Why is coolcept fleX described as a single platform rather than separate models for each market?

Steca built the entire family on one electronic board with preloaded country settings, so the same inverter unit operates correctly on different grids after a simple configuration change. For installation companies, this means fewer SKUs to stock, simpler ordering, and faster project commissioning across countries without waiting for a market-specific version.


### Do I need to buy a separate app to monitor a Steca coolcept fleX inverter?

No, this inverter series works with Steca's sunCloud portal, which is provided free of charge. Users can track energy production, operating status, and historical data in real time through a browser or mobile app, with no extra licensing fees for basic monitoring of the installation.


### What is the maximum power rating in the Steca coolcept fleX inverter series?

The series spans several power classes, from smaller units around 1.5 kW up to models with a nominal power of roughly 5 kW, depending on the specific unit in the lineup. This power range lets the same electronic platform cover both small single-family rooftop systems and somewhat larger residential prosumer installations.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/popup_downloadphp-5683047efd31.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [SolarEdge EV Charging Single Phase Inverter SE3680H (aka H3680SE / SE3680H)](https://comparepv.com/inverter/solaredge-solaredge-ev-charging-single-phase-inverter-se3680h-aka-h3680se-se3680h) | 3.68 kW | 99.0% |  | 10.0 kg | +2.7 pp efficiency, 4.0 kg lighter |
| [SolarEdge SE3680H (HD‑Wave, single phase)](https://comparepv.com/inverter/solaredge-solaredge-se3680h-hd-wave-single-phase) | 3.68 kW | 98.8% |  | 7.8 kg | +2.5 pp efficiency, 6.2 kg lighter |
| [Solplanet ASW3680-S-G2](https://comparepv.com/inverter/solplanet-asw3680-s-g2) | 3.68 kW | 97.5% | 2 | 9.5 kg | +1.2 pp efficiency, 4.5 kg lighter |
| [Solplanet ASW3680-S](https://comparepv.com/inverter/solplanet-asw3680-s) | 3.68 kW | 97.5% | 2 | 12.0 kg | +1.2 pp efficiency, 2.0 kg lighter |
| [Sunways STS-3.6KTL-M](https://comparepv.com/inverter/sunways-sts-3-6ktl-m) | 3.68 kW | 97.5% | 1 | 6.5 kg | +1.2 pp efficiency, -1 MPPT, 7.5 kg lighter |
| [INVT XG3.68KTL](https://comparepv.com/inverter/invt-xg3-68ktl) | 3.68 kW | 97.3% | 2 | 13.0 kg | +1.0 pp efficiency, 1.0 kg lighter |
| [Sunways STS-3.6KTL-SE](https://comparepv.com/inverter/sunways-sts-3-6ktl-se) | 3.68 kW | 97.3% | 2 | 11.5 kg | +1.0 pp efficiency, 2.5 kg lighter |
| [INVT XG3.68KTL-S](https://comparepv.com/inverter/invt-xg3-68ktl-s) | 3.68 kW | 97.2% | 1 | 6.0 kg | +0.9 pp efficiency, -1 MPPT, 8.0 kg lighter |


---

Source: https://comparepv.com/inverter/steca-stecagrid-3611-2

