---
title: "StecaGrid 3213 Grid-tie Inverter: Specs & Datasheet | ComparePV"
description: "StecaGrid 3213 3.2 kW grid-tie inverter. Specs: 97.0% European efficiency, 1 MPPT, 1000 V max DC input, 12.0 kg."
source: "https://comparepv.com/inverter/steca-stecagrid-3213"
updated: 2026-11-14
---

# StecaGrid 3213


## Identity

- **Manufacturer:** Steca
- **Model:** StecaGrid 3213
- **Series:** coolcept³ fleX
- **Rated AC power:** 3.2 kW
- **Type:** Grid-tie
- **Phases:** Three-phase


## How it compares

Compared against 1,005 inverters from 3 to 6 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 97.0% | 97.1% | Typical | 367 |
| MPPT trackers | 1 | 2 | Weak - bottom 6% | 654 |
| Max DC input voltage | 1000 V | 600 V | Strong - top 16% | 75 |
| Weight per kW | 3.8 | 3.9 | Typical | 460 |
| Warranty | - | 5 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 3.2 kW
- **Max apparent power:** 3.20 kVA
- **Phases:** Three-phase
- **Nominal AC voltage:** 400 V
- **Max AC current:** 7.0 A
- **Grid frequency:** 50 Hz
- **Power factor:** 0.8 capacitive - 0.8 inductive
- **Harmonic distortion (THD):** 1.0 %


### PV input

- **Max DC input power:** 3.30 kW
- **Max DC voltage:** 1000 V
- **MPPT voltage range:** 250 to 800 V
- **MPPT trackers:** 1
- **Max input current per MPPT:** 11.0 A


### Efficiency

- **European efficiency:** 97.0 %
- **Max efficiency:** 98.0 %


### Physical

- **Dimensions:** 399 × 657 × 222 mm
- **Weight:** 12.0 kg
- **Enclosure:** IP65
- **Cooling:** forced-air
- **Noise:** 29 dB
- **Operating temperature:** -15 to 60 °C
- **Max humidity:** 100 %


### Connectivity and protection

- **Interfaces:** Ethernet, Display
- **Protocols:** RS-485, Ethernet, Modbus RTU
- **Protection:** DC switch


### Pros

- **No electrolytic capacitors** - The coolcept topology eliminates electrolytic DC-link capacitors - the most common failure point in inverters - and with symmetric three-phase feed-in this materially extends device lifetime compared to designs relying on classic DC-link energy storage.
- **High conversion efficiency** - The proprietary coolcept topology, derived from single-phase StecaGrid inverters, delivers very high European efficiency with limited thermal losses thanks to even heat distribution inside the enclosure.
- **Fast, hassle-free installation** - Externally accessible DC/AC connectors and a DC disconnect eliminate the need to open the housing during installation, and the series' low weight (available in 3.2-6 kW variants) cuts install time versus heavier three-phase inverters in this power class.
- **Droop mode for hybrid systems** - Droop mode support enables direct integration with hybrid systems and energy storage, which at the series' 2018 launch exceeded the standard feature set of simple grid-tied inverters.
- **Global MPP tracking under shading** - Optimized shading management via global MPP tracking reduces production losses under partial module shading, which matters for installations on roofs with complex geometry.


### Cons

- **Discontinued, limited service support** - The series was discontinued (2018-2024); following the Steca/Katek restructuring and support transfer to Kontron Solar, availability of original spare parts and full manufacturer support is limited, complicating servicing of existing installations.
- **Single MPP tracker only** - A single-MPP-tracker design (unlike the 2-MPP-Tracker variant within the same coolcept fleX family) limits flexibility for installations with modules at different orientations or independent string shading.


## About this series

The coolcept³ fleX series comprises three-phase grid inverters with a single MPP tracker, engineered for installations that require stable, symmetrical power feed-in to the public grid. Built on the proprietary coolcept topology inherited from the single-phase StecaGrid inverters, these units deliver **very high efficiency** while keeping thermal losses low. Because energy is fed into the grid on at least two phases at all times, designers were able to eliminate the electrolytic capacitors normally needed for intermediate energy storage - a common failure point in power electronics - resulting in **long service life**. A unique internal cooling concept ensures even heat distribution across the housing, further extending component durability. The series stands out for its **simple, hassle-free installation**: a lightweight housing, externally accessible DC/AC connections, and an integrated DC circuit breaker mean the unit never needs to be opened during setup. A graphical LCD with a guided, intuitive menu simplifies commissioning and ongoing monitoring. The lineup also supports **droop mode for hybrid system integration** and optimized shading management through global MPP tracking. It's a solid choice for installers and asset owners who value reliability, straightforward servicing, and flexibility when expanding three-phase installations with additional energy sources.


## Questions


### Is the Steca coolcept³ fleX series still available for purchase?

No, production of the coolcept³ fleX series has ended and these inverters have been discontinued from the manufacturer's current lineup. Units may still be found through distributors with remaining stock, but for new installations or system expansions it's worth considering current three-phase models from the Steca/KATEK portfolio as a replacement.


### What is the maximum power of coolcept³ fleX inverters and which installations are they suited for?

The series includes models with AC output from 3.2 kW to 6 kW (StecaGrid 3213, 4013, 5013, 6013), each with a single MPPT and maximum DC voltage up to 1000 V. Thanks to symmetrical three-phase grid feed-in, they suit small to medium-sized grid-tied installations requiring stable three-phase connection, such as single-family homes or small commercial buildings.


### How does the coolcept³ fleX differ from single-phase StecaGrid inverters?

The coolcept topology originates from single-phase StecaGrid inverters, but in the fleX version energy is fed into the grid on at least two phases simultaneously. This allowed engineers to eliminate the electrolytic capacitors used for intermediate storage in single-phase units - a common failure point in power electronics - resulting in higher efficiency and longer service life for the three-phase fleX version.


### Can the coolcept³ fleX be installed outdoors and does it operate in low temperatures?

Yes, the enclosure has an IP65 protection rating, allowing outdoor installation on building facades, garages, or exposed walls. The unit operates across a wide ambient temperature range starting at -25°C, and its unique cooling concept distributes heat evenly inside the housing, ensuring stable operation even under harsh, fluctuating climate conditions.


### What is droop mode on the coolcept³ fleX and is it worth using?

Droop mode allows smooth adjustment of grid feed-in power in response to frequency changes, which is useful when integrating with hybrid systems and energy storage. For installers planning to expand a three-phase system with additional energy sources or batteries, this function increases energy management flexibility and helps meet grid operator compliance requirements.


### Is installing the coolcept³ fleX inverter complicated and how much does it weigh?

Installation is designed to be simple and hassle-free - the unit's low weight (approx. 12 kg) along with externally accessible DC/AC connectors and a DC disconnect switch eliminate the need to open the enclosure during setup. A graphical LCD display with guided menus further simplifies commissioning and ongoing monitoring of operating parameters without extra service tools.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/popup_downloadphp-9d446085f6de.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [Sunways STS-3.3KTL-M](https://comparepv.com/inverter/sunways-sts-3-3ktl-m) | 3.3 kW | 97.5% | 1 | 6.5 kg | +0.5 pp efficiency, 5.5 kg lighter |
| [SOFAR 3.3KTL2-G3](https://comparepv.com/inverter/sofar-solar-sofar-3-3ktl2-g3) | 3.3 kW | 97.2% | 1 | 7.3 kg | 4.7 kg lighter |
| [HYXiPower HYX-S3K3-S1](https://comparepv.com/inverter/hyxipower-hyx-s3k3-s1) | 3.3 kW | 97.2% |  | 11.6 kg | Similar on paper |
| [Growatt MIC 3300TL-X](https://comparepv.com/inverter/growatt-mic-3300tl-x) | 3.3 kW | 97.1% | 1 | 6.2 kg | 5.8 kg lighter |
| [Growatt MIC 3300TL-X2 (Pro)](https://comparepv.com/inverter/growatt-mic-3300tl-x2-pro) | 3.3 kW | 97.1% | 1 | 6.2 kg | 5.8 kg lighter |
| [Growatt MIC 3300TL-X2](https://comparepv.com/inverter/growatt-mic-3300tl-x2) | 3.3 kW | 97.1% | 1 | 6.2 kg | 5.8 kg lighter |
| [Deye SUN-3.3K-G04P1-EU-AM1](https://comparepv.com/inverter/deye-sun-3-3k-g04p1-eu-am1) | 3.3 kW | 97.0% | 1 | 5.6 kg | 6.4 kg lighter |
| [SolaX X1-MINI-3.3K-G4](https://comparepv.com/inverter/solax-x1-mini-3-3k-g4) | 3.3 kW | 97.0% | 1 | 5.5 kg | 6.5 kg lighter |


---

Source: https://comparepv.com/inverter/steca-stecagrid-3213

