---
title: "StecaGrid 1511 Grid-tie Inverter: Specs & Datasheet | ComparePV"
description: "StecaGrid 1511 1.5 kW grid-tie inverter. Specs: 96.1% European efficiency, 1 MPPT, 11.7 kg."
source: "https://comparepv.com/inverter/steca-stecagrid-1511"
updated: 2026-11-14
---

# StecaGrid 1511


## Identity

- **Manufacturer:** Steca
- **Model:** StecaGrid 1511
- **Series:** StecaGrid
- **Rated AC power:** 1.5 kW
- **Type:** Grid-tie
- **Phases:** Single-phase


## How it compares

Compared against 449 inverters up to 3 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 96.1% | 96.9% | Weak - bottom 14% | 234 |
| MPPT trackers | 1 | 1 | Typical | 119 |
| Max DC input voltage | - | 550 V |  |  |
| Weight per kW | 7.8 | 5.5 | Typical | 316 |
| Warranty | - | 5 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 1.5 kW
- **Max apparent power:** 1.50 kVA
- **Phases:** Single-phase
- **Nominal AC voltage:** 230 V
- **Max AC current:** 12.0 A
- **Grid frequency:** 50 Hz
- **Power factor:** 0.8 capacitive … 0.8 inductive
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC input power:** 1.54 kW
- **MPPT trackers:** 1
- **Max input current per MPPT:** 13.0 A


### Efficiency

- **European efficiency:** 96.1 %
- **Max efficiency:** 97.4 %


### Physical

- **Dimensions:** 657 × 399 × 222 mm
- **Weight:** 11.7 kg
- **Enclosure:** IP65
- **Cooling:** forced-air
- **Noise:** 31 dB
- **Operating temperature:** -25 to 60 °C
- **Max humidity:** 100 %


### Connectivity and protection

- **Interfaces:** Ethernet
- **Protocols:** RS-485, Ethernet, Modbus RTU
- **Protection:** DC switch


### Pros

- **Transformerless coolcept design** - The coolcept technology eliminates the low-frequency transformer, reducing conversion losses and unit weight by several dozen percent versus transformer-based inverters in the same power class, improving overall system efficiency.
- **IP65 enclosure in coolcept-x variants** - The stainless steel, dust- and water-resistant IP65 enclosure allows outdoor mounting without an additional technical cabinet, reducing installation costs compared to inverters requiring indoor placement (IP20/IP21).
- **Dual master/slave MPPT tracking** - Independent maximum power point tracking for two string inputs increases design flexibility on roofs with irregular geometry or partial shading, a notable advantage over single-stage, single-string inverters in this segment.
- **Solar-Log and StecaGrid Vision integration** - Broad compatibility with third-party monitoring platforms enables remote supervision of the PV fleet and faster fault detection, lowering downtime and lifecycle service costs.
- **European build quality** - The series was manufactured in Steca's German plant (Memmingen), historically delivering strong manufacturing consistency and compliance with VDE/EN standards, valued by installers prioritizing proven reliability over lowest price.


### Cons

- **Production discontinued, limited servicing** - StecaGrid/coolcept production has ended (end year: 2024, with several models reaching EOL as early as 2023 due to Katek/Kontron Solar restructuring). Spare parts and official manufacturer support are now unavailable or sold only as remaining stock, complicating long-term maintenance of existing installations.
- **No support for newer grid-code features** - As a discontinued line closed out before post-2024 regulatory updates, StecaGrid units are not updated for newer grid requirements (e.g., further VDE-AR-N 4105 revisions or hybrid/storage integration), limiting future compliance compared with actively developed tier-1 series (e.g., SMA, Fronius, Huawei).


## About this series

The StecaGrid series is a family of grid-tie inverters built for residential and small commercial installations where reliability and easy integration with existing infrastructure matter just as much as raw performance. At the core of these units is **coolcept technology** - a transformerless design that reduces conversion losses and enables a compact, lightweight build without sacrificing durability. The coolcept-x versions are housed in a **stainless steel enclosure rated IP65**, allowing the inverter to be mounted outdoors in demanding humidity and dust conditions without requiring an additional technical cabinet. Earlier generation models feature a **dual master/slave MPPT tracking system**, enabling independent optimization of two separate panel strings and giving designers more flexibility on roofs with irregular geometry. Another key strength is **broad compatibility with monitoring platforms** such as Solar-Log and StecaGrid Vision, which simplifies remote oversight and speeds up fault detection. StecaGrid is the right choice for buyers looking for a proven European solution with low lifecycle operating costs, rather than simply the cheapest option on the market.


## Questions


### Is the StecaGrid series still available for purchase?

No, the StecaGrid series has been discontinued by the manufacturer and is no longer in production. Units may still be found through distributors clearing stock or on the secondary market, but service, spare parts, and firmware updates may be limited. For new installations, it is worth considering the manufacturer's current lineup or an equivalent replacement.


### What is coolcept technology in StecaGrid inverters, and is it worth choosing?

Coolcept is a transformerless inverter design that eliminates the bulky transformer, reducing conversion losses and allowing for a lighter, more compact unit. This gives StecaGrid higher efficiency under typical operating conditions compared to older transformer-based inverters. The design works well in residential installations where compact mounting and low losses over the system's lifetime matter most.


### Can the StecaGrid coolcept-x inverter be installed outdoors?

Yes, the coolcept-x versions feature a stainless steel enclosure rated IP65, meaning full protection against dust and water jets. They can be safely mounted on an outdoor wall, in an unheated garage, or in other humid or dusty environments without needing an additional technical cabinet to protect the unit.


### How does the dual master/slave MPPT system work in older StecaGrid models?

The dual master/slave MPPT tracker allows the inverter to independently monitor and optimize two separate panel strings, for example with different orientations or tilt angles. This lets installers design a system for roofs with unusual geometry, where some panels face a different direction, without sacrificing overall system performance.


### What monitoring systems is the StecaGrid inverter compatible with?

StecaGrid works with popular monitoring platforms such as Solar-Log and the dedicated StecaGrid Vision system. This enables real-time remote monitoring of energy production, fast detection of faults, and alerts for performance drops, which is useful for both homeowners and installation companies managing multiple systems.


### Is the StecaGrid inverter suitable for small commercial installations, or only residential ones?

The StecaGrid series was designed for both applications - residential installations and small commercial systems. The reliable, transformerless coolcept design and straightforward integration with existing electrical infrastructure make it a good fit for both scenarios, particularly where low operating costs over the installation's lifetime matter most.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/popup_downloadphp-bb1ece9405aa.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [GoodWe GW1500-SS](https://comparepv.com/inverter/goodwe-gw1500-ss) | 1.5 kW | 97.4% | 1 | 12.0 kg | +1.3 pp efficiency |
| [Deye SUN-1.5K-G](https://comparepv.com/inverter/deye-sun-1-5k-g) | 1.5 kW | 97.1% | 1 | 6.0 kg | +1.0 pp efficiency, 5.7 kg lighter |
| [Solplanet ASW1500-S-G2](https://comparepv.com/inverter/solplanet-asw1500-s-g2) | 1.5 kW | 97.1% | 1 | 9.5 kg | +1.0 pp efficiency, 2.2 kg lighter |
| [Growatt MIC 1500TL-X](https://comparepv.com/inverter/growatt-mic-1500tl-x) | 1.5 kW | 97.0% | 1 | 6.0 kg | +0.9 pp efficiency, 5.7 kg lighter |
| [Growatt MIC 1500TL-X2](https://comparepv.com/inverter/growatt-mic-1500tl-x2) | 1.5 kW | 97.0% | 1 | 6.0 kg | +0.9 pp efficiency, 5.7 kg lighter |
| [INVT XG1.5KTL-S](https://comparepv.com/inverter/invt-xg1-5ktl-s) | 1.5 kW | 97.0% | 1 | 6.0 kg | +0.9 pp efficiency, 5.7 kg lighter |
| [SUNSYNK-1.5K-G04P1-EU-AM1](https://comparepv.com/inverter/sunsynk-sunsynk-1-5k-g04p1-eu-am1) | 1.5 kW | 96.9% | 1 | 5.6 kg | +0.8 pp efficiency, 6.1 kg lighter |
| [Deye SUN-1.5K-G04P1-EU-AM1](https://comparepv.com/inverter/deye-sun-1-5k-g04p1-eu-am1) | 1.5 kW | 96.9% | 1 | 5.6 kg | +0.8 pp efficiency, 6.1 kg lighter |


---

Source: https://comparepv.com/inverter/steca-stecagrid-1511

