---
title: "SRNE IESP500SH3 Hybrid Inverter: Specs & Datasheet | ComparePV"
description: "SRNE IESP500SH3 50 kW hybrid inverter. Specs: 97.6% European efficiency, 4 MPPT, 1000 V max DC input, 98.0 kg, 5 yrs warranty."
source: "https://comparepv.com/inverter/srne-iesp500sh3"
updated: 2026-11-05
---

# SRNE IESP500SH3


## Identity

- **Manufacturer:** SRNE
- **Model:** IESP500SH3
- **Series:** IESP
- **Rated AC power:** 50 kW
- **Type:** Hybrid
- **Phases:** Three-phase
- **Battery port:** yes


## How it compares

Compared against 552 inverters from 30 to 100 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 97.6% | 98.2% | Weak - bottom 15% | 349 |
| MPPT trackers | 4 | 4 | Typical | 104 |
| Max DC input voltage | 1000 V | 1100 V | Typical | 298 |
| Weight per kW | 2.0 | 1.2 | Weak - bottom 11% | 460 |
| Warranty | 5 yrs | 5 yrs | Typical | 45 |


## Specification


### AC output

- **Rated AC power:** 50 kW
- **Max apparent power:** 60.00 kVA
- **Phases:** Three-phase
- **Nominal AC voltage:** 400 V
- **Max AC current:** 86.6 A
- **Grid frequency:** 50 Hz
- **Power factor:** 0.8 leading to 0.8 lagging
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC input power:** 90.00 kW
- **Max DC voltage:** 1000 V
- **MPPT voltage range:** 150 to 850 V
- **Start-up voltage:** 160 V
- **MPPT trackers:** 4
- **Max input current per MPPT:** 40.0 A
- **Max short-circuit current per MPPT:** 60.0 A


### Efficiency

- **European efficiency:** 97.6 %
- **Max efficiency:** 98.1 %


### Battery

- **Battery port:** Yes
- **Battery voltage:** 150-820Vdc
- **Max charge current:** 160.0 A
- **Max discharge current:** 160.0 A


### Physical

- **Dimensions:** 1010 × 622 × 342 mm
- **Weight:** 98.0 kg
- **Enclosure:** IP65
- **Cooling:** forced-air
- **Noise:** 65 dB
- **Operating temperature:** -40 to 60 °C
- **Max humidity:** 100 %


### Connectivity and protection

- **Interfaces:** Wi-Fi, Display
- **Protocols:** RS485, CAN, USB, Dry Contact, Wi-Fi/4G Stick (Optional)
- **Protection:** AFCI, Surge protection


### Warranty and certificates

- **Warranty:** 5 years
- **Certifications:** EN50549, VDE4105, IEC62109-1, IEC62109-2, EN61000-6-1, EN61000-6-3, FCC 15 class B


### Pros

- **4 independent MPPT trackers** - Four MPPT inputs allow combining different roof orientations or PV module types without energy yield loss, an edge over competing hybrids in the 50-60 kW class, where 2-3 trackers are often the standard.
- **DC oversizing up to 1.6x** - A DC/AC ratio of up to 1.6x allows connecting significantly more PV capacity than typical inverters in this power class permit, boosting energy production during morning and afternoon hours and better utilizing limited AC grid connection capacity.
- **Ultra-wide 150-850V DC battery voltage range** - The 150-850V DC range notably exceeds the typical 200-800V found in competing products, easing integration of energy storage systems from different manufacturers and cell technologies without extra DC/DC converters.
- **Fully unbalanced three-phase load support** - Support for fully unbalanced three-phase loads means the installation doesn't require load balancing across phases - a key advantage for commercial and industrial sites with uneven power draw distribution.
- **Scalability up to 9 parallel units** - Parallel operation of up to 9 inverters enables building PV+BESS systems up to roughly 540 kW from a single product series, reducing integration costs for large C&I installations.


### Cons

- **No BNEF Tier 1 standing** - SRNE, founded in 2009, does not appear on the BNEF Tier 1 inverter ranking, unlike Huawei, Sungrow, or SMA. For institutional investors requiring project bankability, this may complicate financing for large C&I installations.
- **Limited field track record in the 50-60 kW C&I segment** - The IESP500SH3/550SH3/600SH3 models are only documented from 2025 onward (EU manual V00, August 2025), meaning a short field reference period compared to competitors with years of track record in the commercial hybrid segment.


## About this series

The SRNE IESP series is a line of three-phase hybrid solar storage inverters rated at 50-60 kW, built for commercial and industrial installations where configuration flexibility and ruggedness under demanding conditions come first. The series stands out with **4 independent MPPT trackers**, letting installers combine different roof orientations or PV module types without sacrificing energy yield. It also supports **DC oversizing up to 1.6x**, allowing a larger PV array than standard inverters in this class permit, boosting production during the morning and afternoon hours. A key advantage is the **ultra-wide battery voltage range (150-850V DC)**, which simplifies battery storage selection regardless of manufacturer or cell technology. The IESP also handles **fully unbalanced three-phase loads**, making it a practical choice for sites with uneven load distribution across phases. On top of that, the inverter **supports generator input**, ensuring continuous operation even during extended grid outages. An IP65-rated enclosure and DC arc-fault detection add further safety for outdoor installations. It's a solution built for PV+BESS integrators seeking scalability, through parallel operation of up to 9 units, and reliability in a single device.


## Questions


### How does the 1.6x DC oversizing in SRNE IESP differ from standard inverters?

Typical hybrid inverters allow PV module power to exceed rated inverter power by only about 1.2-1.3x. SRNE IESP allows oversizing up to 1.6x, so a 50 kW inverter can accept up to 80 kW of PV modules. This boosts energy yield during lower-irradiance periods, such as morning and afternoon, helping the system pay back faster.


### What types of energy storage batteries can be connected to SRNE IESP?

The inverter supports an ultra-wide battery voltage range of 150-850V DC, allowing it to work with energy storage systems from various manufacturers and cell technologies, including LiFePO4. This flexibility is useful when retrofitting existing installations or reusing batteries already on site, without needing storage dedicated to one specific inverter model.


### Can SRNE IESP handle an installation with unbalanced load across phases?

Yes, the IESP series supports fully unbalanced three-phase loading, meaning each phase can carry a different load without restrictions imposed by the inverter. This is a key advantage for commercial and industrial sites where single-phase loads, such as lighting or small equipment, rarely distribute evenly across all three phases.


### Does the SRNE IESP inverter keep running during an extended grid outage?

Yes, IESP supports generator input, ensuring continuous operation even during prolonged grid power outages. This is especially important for industrial and commercial sites, where downtime caused by power interruptions can halt production or disrupt critical systems.


### How many SRNE IESP inverters can be connected in one installation?

The IESP series supports parallel operation of up to 9 units, allowing PV+BESS systems to scale well beyond a single 50-60 kW unit. This is designed for commercial and industrial integrators planning installations of several hundred kilowatts without changing the hardware platform.


### Is the SRNE IESP enclosure suitable for outdoor installation?

Yes, the inverter has an IP65 rating, providing full protection against dust and water jets from any direction, so it can be mounted outdoors without an additional canopy. It also includes DC arc-fault detection, increasing safety for installations exposed to weather conditions and temperature fluctuations.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/c33f23bc68abb3f088ef2151.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [Sigenergy 50M1-HYB](https://comparepv.com/inverter/sigenergy-50m1-hyb) | 50 kW | 98.3% |  | 102.0 kg | +0.7 pp efficiency, 4.0 kg heavier |
| [Sigenergy 50M1-HYA](https://comparepv.com/inverter/sigenergy-50m1-hya) | 50 kW | 98.3% |  | 72.0 kg | +0.7 pp efficiency, 26.0 kg lighter |
| [Afore AF50K-TH](https://comparepv.com/inverter/afore-af50k-th) | 50 kW | 98.3% | 4 | 70.0 kg | +0.7 pp efficiency, 28.0 kg lighter |
| [FoxESS H3-50-Plus](https://comparepv.com/inverter/foxess-h3-50-plus) | 50 kW | 98.1% |  | 115.0 kg | +0.5 pp efficiency, 17.0 kg heavier |
| [FoxESS P3-50-Plus](https://comparepv.com/inverter/foxess-p3-50-plus) | 50 kW | 98.1% |  | 115.0 kg | +0.5 pp efficiency, 17.0 kg heavier |
| [Livoltek HP3-50KS1](https://comparepv.com/inverter/livoltek-hp3-50ks1) | 50 kW | 98.0% | 5 | 80.0 kg | +0.4 pp efficiency, +1 MPPT, 18.0 kg lighter |
| [HYXiPower HYX-H50K-ET](https://comparepv.com/inverter/hyxipower-hyx-h50k-et) | 50 kW | 98.0% |  | 95.0 kg | +0.4 pp efficiency, 3.0 kg lighter |
| [GoodWe GW50K-ET-10](https://comparepv.com/inverter/goodwe-gw50k-et-10) | 50 kW | 97.8% |  | 65.0 kg | 33.0 kg lighter |


---

Source: https://comparepv.com/inverter/srne-iesp500sh3

