---
title: "SolarMax 8SMT Grid-tie Inverter: Specs & Datasheet | ComparePV"
description: "SolarMax 8SMT 8 kW grid-tie inverter. Specs: 97.4% European efficiency, 2 MPPT, 1000 V max DC input, 19.8 kg, 5 yrs warranty."
source: "https://comparepv.com/inverter/solarmax-8smt"
updated: 2026-11-14
---

# SolarMax 8SMT


## Identity

- **Manufacturer:** SolarMax
- **Model:** 8SMT
- **Series:** SMT
- **Rated AC power:** 8 kW
- **Type:** Grid-tie
- **Phases:** Three-phase


## How it compares

Compared against 839 inverters from 6 to 12 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 97.4% | 97.5% | Typical | 335 |
| MPPT trackers | 2 | 2 | Typical | 145 |
| Max DC input voltage | 1000 V | 800 V | Typical | 135 |
| Weight per kW | 2.5 | 3.0 | Typical | 297 |
| Warranty | 5 yrs | 5 yrs | Typical | 123 |


## Specification


### AC output

- **Rated AC power:** 8 kW
- **Max apparent power:** 8.80 kVA
- **Phases:** Three-phase
- **Nominal AC voltage:** 400 V
- **Max AC current:** 13.0 A
- **Grid frequency:** 50 Hz
- **Power factor:** 0.8 overexcited to 0.8 underexcited
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC voltage:** 1000 V
- **MPPT voltage range:** 160 to 950 V
- **Start-up voltage:** 200 V
- **MPPT trackers:** 2
- **Max input current per MPPT:** 26.0 A
- **Max short-circuit current per MPPT:** 30.0 A


### Efficiency

- **European efficiency:** 97.4 %
- **Max efficiency:** 98.0 %


### Physical

- **Dimensions:** 500 × 400 × 190 mm
- **Weight:** 19.8 kg
- **Enclosure:** IP65
- **Cooling:** Air cooling
- **Noise:** 30 dB
- **Operating temperature:** -25 to 60 °C
- **Max humidity:** 100 %
- **Max altitude:** 4000 m


### Connectivity and protection

- **Interfaces:** Wi-Fi, Display
- **Protocols:** WLAN, RS485, GPRS
- **Protection:** DC switch, Surge protection


### Warranty and certificates

- **Warranty:** 5 years
- **Certifications:** CE, IEC62109-1, IEC62109-2, EN50549-1, VDE-AR-N 4105, IEC61727, IEC62116, VDE 0126-1-1, CEI 0-21, EN61000-6-1, EN61000-6-2, EN61000-6-3, EN61000-6-4, ISO 9001, ISO 14001


### Pros

- **Dual independent MPPT trackers** - Two separate MPPT trackers allow strings with different tilt, azimuth, or partial shading to be handled without dragging down overall system yield, a notable advantage on irregular commercial rooftops.
- **IP65 enclosure rating** - A dust- and water-jet-resistant housing enables outdoor mounting without an extra protective canopy or enclosure, reducing installation costs compared to IP20/IP21 units that require indoor placement.
- **Built for repowering** - The 6-15 kW power range and wide DC input voltage window allow boosting an existing PV system's capacity without replacing the full DC infrastructure, cutting retrofit time and cost versus a full system swap.
- **Simple setup via MaxLink app** - The MaxLink app connects directly to the inverter's built-in WLAN access point, eliminating the need for extra service cabling or external diagnostic modules during initial commissioning.
- **Extended warranty option up to 10 years** - The standard 5-year warranty can be extended to 10 years, which for commercial-class 6-15 kW units is on par with tier-1 manufacturers like Huawei or SMA in the same power class.


### Cons

- **Production discontinued** - The SMT series was discontinued in 2024 (in production since 2019), meaning limited availability of new units and spare parts in case of failure or component replacement.
- **Manufacturer's history of financial distress** - SolarMax GmbH went through insolvency proceedings in its history (2017-2018), which, combined with the SMT series discontinuation, raises long-term risk around service support and the hotline over a typical 20-25 year PV system lifespan.
- **Inconsistent Euro efficiency figures** - Manufacturer and distributor materials report conflicting Euro efficiency values for series models (97% vs. 98% max), which is below top tier-1 inverters reaching 98.6-98.8%, and should be verified against the current datasheet before specifying.


## About this series

The SolarMax SMT series comprises commercial-grade three-phase inverters designed for trade and industrial installations, where design flexibility and reliable operation under demanding conditions matter most. Covering models from 6 to 15 kW, the series stands out with **a design ideal for repowering** existing PV systems, allowing operators to boost system capacity without replacing the entire infrastructure. Thanks to **two independent MPP trackers**, the unit adapts flexibly to varied string configurations, even when panels face different orientations or experience partial shading. A **wide input voltage range** gives system designers considerable freedom in selecting module count and type, simplifying overall system planning. The **IP65-rated enclosure** allows outdoor mounting, protecting the electronics from dust and water jets, an important feature for rooftop and ground-mount installations in variable climates. The inverter's compact dimensions and low weight make it easier to transport and install by a single technician. Setup and commissioning take place **via the MaxLink app with quick WLAN connectivity**, eliminating the need for additional diagnostic wiring. A monitoring portal, a dedicated service hotline, and the option to extend the warranty to 10 years round out the package, making the series a solid choice for installers who value ease of operation and long-term investment security.


## Questions


### Is the SolarMax SMT series still available for purchase?

No, production of the SolarMax SMT series has been discontinued. Units may still be available from distributors while stock lasts, so it's best to confirm current availability with your supplier before ordering. Service support, the monitoring portal, and warranty coverage for already installed units remain in place.


### Is the SolarMax SMT inverter suitable for repowering an existing PV system?

Yes, the 6 to 15 kW models were specifically designed for repowering projects. Their compact build and wide input voltage range allow existing panel strings to be connected directly, letting you boost overall system output without replacing the wiring or mounting structure.


### What do the two MPPT trackers on the SolarMax SMT inverter do, and are they worth considering?

The two independent MPPT trackers let the inverter optimize two panel groups separately, for example strings installed at different tilt angles or subject to partial shading. This is a practical feature for roofs with irregular geometry, as it avoids the energy losses that occur when mismatched strings are combined into a single circuit.


### Can the SolarMax SMT inverter be installed outdoors?

Yes, the enclosure has an IP65 rating, providing full protection against dust and water jets from any direction. The inverter can be mounted on a facade, ground-mounted array, or rooftop without needing extra weatherproof housing, which is especially useful in variable climates.


### How is the SolarMax SMT inverter configured and commissioned without extra diagnostic equipment?

Setup is done through the MaxLink mobile app, which connects to the inverter via WLAN. Installers don't need any additional cabling or a service laptop, which significantly speeds up commissioning, particularly for commercial and industrial installations.


### What is the maximum warranty available for the SolarMax SMT inverter?

The standard manufacturer warranty can be extended up to 10 years. Combined with the monitoring portal and a dedicated service hotline, this gives commercial and industrial investors long-term peace of mind and fast access to technical support if an issue arises.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/SWR-SMT-DS-EN-133dad10d9ce.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [INVT XG8KTR-S](https://comparepv.com/inverter/invt-xg8ktr-s) | 8 kW | 98.3% | 2 | 12.0 kg | +0.9 pp efficiency, 7.8 kg lighter |
| [Solplanet ASW8K-LT-G2](https://comparepv.com/inverter/solplanet-asw8k-lt-g2) | 8 kW | 98.2% | 2 | 16.0 kg | +0.8 pp efficiency, 3.8 kg lighter |
| [Solplanet ASW8K-LT-G2 Pro](https://comparepv.com/inverter/solplanet-asw8k-lt-g2-pro) | 8 kW | 98.2% | 2 | 16.0 kg | +0.8 pp efficiency, 3.8 kg lighter |
| [Afore HNS8000TL](https://comparepv.com/inverter/afore-hns8000tl) | 8 kW | 98.2% | 2 | 17.0 kg | +0.8 pp efficiency, 2.8 kg lighter |
| [Growatt MOD 8000TL3-X](https://comparepv.com/inverter/growatt-mod-8000tl3-x) | 8 kW | 98.1% | 2 | 14.0 kg | +0.7 pp efficiency, 5.8 kg lighter |
| [Growatt MOD 8KTL3-X2(Pro)](https://comparepv.com/inverter/growatt-mod-8ktl3-x2-pro) | 8 kW | 98.1% | 2 | 14.6 kg | +0.7 pp efficiency, 5.2 kg lighter |
| [Hopewind hopeSun 8KTL](https://comparepv.com/inverter/hopewind-hopesun-8ktl) | 8 kW | 98.1% | 2 | 22.0 kg | +0.7 pp efficiency, 2.2 kg heavier |
| [HYXiPower HYX-S8K-T](https://comparepv.com/inverter/hyxipower-hyx-s8k-t) | 8 kW | 98.1% | 2 | 21.0 kg | +0.7 pp efficiency, 1.2 kg heavier |


---

Source: https://comparepv.com/inverter/solarmax-8smt

