---
title: "Sol-Ark 12K-2P-N Hybrid Inverter: Specs & Datasheet | ComparePV"
description: "Sol-Ark 12K-2P-N 9 kW hybrid inverter. Specs: 2 MPPT, 500 V max DC input, 35.4 kg, 10 yrs warranty."
source: "https://comparepv.com/inverter/sol-ark-12k-2p-n"
updated: 2026-11-14
---

# Sol-Ark 12K-2P-N


## Identity

- **Manufacturer:** Sol-Ark
- **Model:** 12K-2P-N
- **Series:** Limitless 12K-LV
- **Rated AC power:** 9 kW
- **Type:** Hybrid
- **Phases:** Single-phase
- **Battery port:** yes


## How it compares

Compared against 839 inverters from 6 to 12 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | - | 97.5% |  |  |
| MPPT trackers | 2 | 2 | Typical | 145 |
| Max DC input voltage | 500 V | 800 V | Weak - bottom 10% | 640 |
| Weight per kW | 3.9 | 3.0 | Weak - bottom 24% | 624 |
| Warranty | 10 yrs | 5 yrs | Strong - top 19% | 13 |


## Specification


### AC output

- **Rated AC power:** 9 kW
- **Max apparent power:** 16.00 kVA
- **Phases:** Single-phase
- **Nominal AC voltage:** 240 V
- **Max AC current:** 37.5 A
- **Grid frequency:** 60 Hz
- **Power factor:** +/- 0.9 adjustable


### PV input

- **Max DC input power:** 13.00 kW
- **Max DC voltage:** 500 V
- **MPPT voltage range:** 175 to 425 V
- **Start-up voltage:** 125 V
- **MPPT trackers:** 2
- **Max input current per MPPT:** 20.0 A


### Efficiency

- **Max efficiency:** 97.5 %
- **CEC efficiency:** 96.5 %


### Battery

- **Battery port:** Yes
- **Battery voltage:** 43-63V
- **Max charge current:** 185.0 A
- **Max discharge current:** 185.0 A
- **Backup power:** 9.00 kW
- **Grid-forming:** Yes


### Physical

- **Dimensions:** 750 × 450 × 254 mm
- **Weight:** 35.4 kg
- **Enclosure:** IP65 / NEMA 3R
- **Noise:** 30 dB
- **Operating temperature:** -25 to 55 °C
- **Max altitude:** 2000 m


### Connectivity and protection

- **Interfaces:** Wi-Fi, Ethernet
- **Protocols:** RS485, CANBus, Wi-Fi, LAN
- **Protection:** AFCI, DC switch, Surge protection


### Warranty and certificates

- **Warranty:** 10 years
- **Certifications:** UL 1741 SB, UL 1741 SA11, UL 1741 CRD-PCS, IEEE 1547.1-2020, UL 1699B, UL 1998, FCC Part 15 Class B, CSIP, Ca Rule 21, HECO Rule 14H (SRD 2.0), CSA C22.2 107.1-16


### Pros

- **Transformerless design - high efficiency** - The transformerless architecture delivers lower weight and reduced heat losses compared to classic transformer-based hybrid inverters, translating into measurably higher conversion efficiency in daily operation.
- **IP65/NEMA 3R enclosure for outdoor mounting** - The IP65/NEMA 3R rating allows outdoor installation without an additional protective enclosure, which in a typical residential project lowers installation costs and simplifies service access.
- **Scalable up to 9 parallel units** - A single model serves both small households and significantly higher-power installations thanks to support for up to 9 units in parallel - a notably wider scalability range than typical residential inverters in this class, usually capped at 2-3 units.
- **Integrated automatic generator start** - A factory-built auto-start function for a backup generator, requiring no add-on modules, ensures continuous home power supply during prolonged low-solar periods or grid outages - a key advantage for users relying on off-grid/backup stability.
- **10-year standard manufacturer warranty** - Sol-Ark offers a 10-year limited warranty on the Limitless series, matching the upper end of the standard for residential hybrid inverters in the US market (typically 5-10 years among competitors).


### Cons

- **Discontinued (end-of-life in 2026)** - The Limitless 12K-LV series was discontinued in 2026, meaning limited availability of spare parts and potentially longer warranty service turnaround for already-installed units.
- **Only 2 MPPT trackers** - Two independent MPPT trackers limit configuration flexibility in installations with more than two roof orientations or complex partial shading, whereas some competing hybrid models (e.g., with 3-4 MPPTs) offer greater design freedom in this respect.


## About this series

The Limitless 12K-LV series is a residential hybrid inverter built for homeowners who expect real energy independence, not just lower utility bills. At its core is a **transformerless design**, which keeps efficiency high while reducing weight and heat losses compared to transformer-based units. The inverter runs two independent MPPT channels, giving installers flexibility to configure strings across different roof orientations without sacrificing production yield. The rugged **IP65/NEMA 3R enclosure** allows outdoor mounting without an additional cabinet, cutting installation costs and simplifying service access. For users who depend on uninterrupted power, the standout feature is **integrated automatic generator start**, which kicks in a backup generator during extended low-sun periods or grid outages to keep the home powered without manual intervention. The unit is also fully **stackable up to 9 units in parallel**, so a single model scales from a modest household system to a much larger installation. The series further distinguishes itself with **comprehensive integrated PV protections** - arc-fault detection, ground-fault detection, and rapid shutdown built in at the factory, eliminating the need for extra safety modules and shortening install time.


## Questions


### Is the Sol-Ark Limitless 12K-LV inverter still available for purchase?

No, the Limitless 12K-LV series has been discontinued by Sol-Ark. Units may still be found at distributors as remaining stock, but no new factory orders are being produced. Homeowners planning to expand an existing installation with additional parallel units should contact a distributor as soon as possible, since availability may run out quickly. It is also worth considering current models from the manufacturer's lineup.


### What is the difference between the transformerless design in the Limitless 12K-LV and inverters with a transformer?

The transformerless design eliminates the heavy low-frequency transformer, making the unit lighter, reducing heat losses, and achieving higher conversion efficiency, typically above 97 percent. In practice, this means lower energy losses when transferring power from panels to the grid or battery, and easier installation due to lower weight compared to traditional transformer-based inverters.


### Can the Limitless 12K-LV be installed outdoors on the exterior of a building?

Yes, the IP65/NEMA 3R rated enclosure is specifically designed for outdoor mounting without the need for an additional protective cabinet. The unit withstands rain, dust, and weather conditions typical of installations on an exterior wall of a house or garage. Outdoor mounting reduces installation costs since no separate outdoor enclosure is needed, while also simplifying service access without entering the building.


### How does the automatic generator start feature work on the Limitless 12K-LV?

The integrated automatic generator start monitors battery state of charge and grid availability. When solar production and stored energy drop below a set threshold while the grid is unavailable, the inverter sends a start signal to the connected generator on its own. This keeps the home powered during extended grid outages or several consecutive cloudy days without requiring manual intervention from the user.


### How many Limitless 12K-LV units can be paralleled, and what is this used for?

The series supports parallel stacking of up to 9 units, allowing power output to scale from a small household up to installations serving significantly higher energy demand, such as larger homes with electric heating, a heat pump, or an EV charging station. This architecture allows the system to be expanded in stages by adding units as needs grow, without replacing the entire installation.


### What built-in PV safety features does the Limitless 12K-LV have, and are extra modules required?

The inverter includes factory-integrated arc fault detection, ground fault detection, and rapid shutdown functionality. This means installers do not need to purchase and mount separate safety modules required by code, which shortens installation time and lowers overall system cost compared to solutions that rely on external PV safety devices.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/SK150-0003_Rev-3_12K_Datasheet_EN_18June2025-f7807b71559f.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [Growatt MOD 9000TL3-XH](https://comparepv.com/inverter/growatt-mod-9000tl3-xh) | 9 kW | 98.1% | 2 | 14.0 kg | 21.4 kg lighter |
| [Growatt MOD 9000TL3-HU](https://comparepv.com/inverter/growatt-mod-9000tl3-hu) | 9 kW | 98.1% | 2 | 19.0 kg | 16.4 kg lighter |
| [SolarEdge SE9K](https://comparepv.com/inverter/solaredge-se9k) | 9 kW | 97.5% |  | 16.4 kg | 19.0 kg lighter |
| [FoxESS KH9](https://comparepv.com/inverter/foxess-kh9) | 9 kW | 97.4% |  | 29.0 kg | 6.4 kg lighter |
| [FoxESS KA9](https://comparepv.com/inverter/foxess-ka9) | 9 kW | 97.4% |  | 27.5 kg | 7.9 kg lighter |
| [Deye SUN-9K-SG01LP2-US-AM2](https://comparepv.com/inverter/deye-sun-9k-sg01lp2-us-am2) | 9 kW | 97.0% | 2 | 51.5 kg | 16.1 kg heavier |
| [Growatt MIN 9000TL-XH-US](https://comparepv.com/inverter/growatt-min-9000tl-xh-us) | 9 kW |  | 4 | 20.5 kg | +2 MPPT, 14.9 kg lighter |
| [Afore AF9K-SLP](https://comparepv.com/inverter/afore-af9k-slp) | 9 kW |  | 3 | 43.0 kg | +1 MPPT, 7.6 kg heavier |


---

Source: https://comparepv.com/inverter/sol-ark-12k-2p-n

