---
title: "Sigenergy SigenStor Neo EC 10.0 TP Hybrid Inverter: Specs & Datasheet | ComparePV"
description: "Sigenergy SigenStor Neo EC 10.0 TP 10 kW hybrid inverter. Specs: 98.7% European efficiency, 30.0 kg."
source: "https://comparepv.com/inverter/sigenergy-sigenstor-neo-ec-10-0-tp"
updated: 2026-11-05
---

# Sigenergy SigenStor Neo EC 10.0 TP


## Identity

- **Manufacturer:** Sigenergy
- **Model:** SigenStor Neo EC 10.0 TP
- **Series:** SigenStor Neo EC
- **Rated AC power:** 10 kW
- **Type:** Hybrid
- **Battery port:** yes


## How it compares

Compared against 839 inverters from 6 to 12 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 98.7% | 97.5% | Strong - top 1% | 3 |
| MPPT trackers | - | 2 |  |  |
| Max DC input voltage | - | 800 V |  |  |
| Weight per kW | 3.0 | 3.0 | Typical | 413 |
| Warranty | - | 5 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 10 kW
- **Max apparent power:** 11.00 kVA
- **Max AC current:** 16.7 A
- **Power factor:** 0.8 leading ~ 0.8 lagging
- **Harmonic distortion (THD):** 2.0 %


### PV input

- **Max DC input power:** 30.00 kW
- **Max input current per MPPT:** 22.0 A
- **Max short-circuit current per MPPT:** 30.0 A


### Efficiency

- **European efficiency:** 98.7 %
- **Max efficiency:** 99.0 %


### Battery

- **Battery port:** Yes


### Physical

- **Dimensions:** 360 × 800 × 240 mm
- **Weight:** 30.0 kg
- **Enclosure:** IP66
- **Cooling:** natural
- **Operating temperature:** -40 to 65 °C
- **Max humidity:** 100 %
- **Max altitude:** 4000 m


### Connectivity and protection

- **Interfaces:** Wi-Fi, Ethernet, Bluetooth
- **Protocols:** WLAN, Fast Ethernet, RS485, Sigen CommMod (4G/3G/2G), Sub-1G, Bluetooth
- **Protection:** AFCI, Surge protection


### Pros

- **Zero-gap backup switchover (0 ms)** - Datasheets for the EC series confirm a 0 ms disruption time when switching to backup mode, effectively eliminating any perceptible power loss for the end user - a rare figure versus competitors that typically specify 10-20 ms.
- **Full inverter + BMS + EMS integration** - Combining the hybrid inverter, battery management system, and EMS module into a single unit reduces BoS component count and potential failure points compared to systems built from separate inverter, battery controller, and external EMS hardware.
- **Modular scalability with Neo BAT batteries** - The ability to add further Neo BAT battery modules allows storage capacity to be expanded without replacing the central unit, lowering the cost of future capacity upgrades.
- **IP66 enclosure with fanless cooling** - An IP66 protection rating combined with convection-based, fanless cooling enables outdoor installation in harsh weather without fan noise, a meaningful advantage for residential siting.
- **10-year warranty on the energy controller** - Per Sigenergy's warranty documentation (AU/NZ market, mirrored in the EU), the Sigen Energy Controller carries a 10-year warranty, matching tier-1 standards for hybrid inverters with integrated storage.


### Cons

- **Short market track record** - Sigenergy was founded in 2022, so the Neo EC series lacks the multi-year field history of manufacturers operating for 10-15 years (e.g., SMA, Fronius, Huawei), raising uncertainty around long-term durability and local service availability in Poland.
- **Limited confirmed technical data for the PL/EU market** - Publicly available datasheets and pricing are mostly sourced from AU/NZ and Asian markets, and regional specs (e.g., MPPT ranges, pricing) for Neo EC in Poland are not yet fully standardized, making direct cost comparison with local tier-1 competitors harder.


## About this series

The SigenStor Neo EC series is a smart energy controller that combines a hybrid inverter, battery management system, and EMS module in a single compact unit, turning a PV and storage installation into one cohesive system rather than a set of separate components. Its modular architecture allows multiple battery modules from the SigenStor Neo BAT series to be connected, so **energy storage capacity can be scaled flexibly** as a home's or business's needs grow, without replacing the entire system. The standout advantage of this line is **seamless backup switching**, so occupants never notice the moment grid power is lost, even during sudden outages. The unit stands out with its **wide MPPT voltage range** and multiple independent trackers, making it easier to design systems with irregular shading or roof sections facing different directions. An **IP66-rated enclosure** with fanless convection cooling allows for outdoor mounting without operational noise. An additional **Smart Port** enables easy integration with a backup generator, further boosting energy independence. Available in single-phase and three-phase versions, the series suits both single-family homes and larger commercial installations, giving investors a scalable, future-proof solution.


## Questions


### Can the SigenStor Neo EC energy storage system be expanded with additional batteries later?

Yes, this is one of the series' main advantages. The SigenStor Neo EC uses a modular architecture and works with battery modules from the SigenStor Neo BAT line, which can be added one by one as a home's or business's energy needs grow. There is no need to replace the entire system - adding another module is enough, lowering the entry cost and letting the investment be spread over time.


### What does seamless switching to backup power actually mean on the SigenStor Neo EC?

When grid power is lost, the unit switches the home to battery backup fast enough that occupants don't notice an interruption - lights stay on, routers don't restart, and refrigerators keep running. This is a meaningful improvement over many older UPS/backup setups, where the switchover takes long enough for sensitive electronics to reset or shut down.


### How many independent MPPT trackers does the SigenStor Neo EC have, and why does it matter for a shaded roof?

The SigenStor Neo EC features a wide MPPT voltage range covered by multiple independent trackers. This lets separate PV strings operate independently, which matters a lot on roofs with chimneys, dormers, skylights, or different roof pitch orientations - shading on one part of the array doesn't reduce output on other strings connected to a different MPPT tracker.


### Can the SigenStor Neo EC be installed outdoors without worrying about noise or moisture?

Yes, the unit has an IP66-rated enclosure, meaning full protection against dust and powerful water jets, while fanless convection cooling eliminates the operating noise typical of inverters with active fan cooling. This allows the SigenStor Neo EC to be mounted on a facade, in an unventilated garage, or outdoors - even close to bedroom windows - without annoying buzzing.


### What is the Smart Port on the SigenStor Neo EC used for, and does it need extra hardware?

The Smart Port is a dedicated connector that allows a backup generator to be integrated with the SigenStor Neo EC system. It automates charging the energy storage from the generator during extended grid outages, increasing a home's or business's energy independence. Integration happens within the same EMS-managed system, without building a separate, parallel control setup for the generator.


### Is the SigenStor Neo EC available in a single-phase version for a smaller single-family home?

Yes, the SigenStor Neo EC series comes in both single-phase and three-phase versions, allowing the unit to match the scale of the installation. The single-phase version suits a typical single-family home with lower power demand, while the three-phase version is better for larger homes, farms, or commercial installations where loads are higher and spread across all three grid phases.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/1789970505710_e41e9a67-b4d4-4b69-90d9-638900e90b8e-9b23c59a9840.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [SolarEdge SE10000H](https://comparepv.com/inverter/solaredge-se10000h) | 10 kW | 99.0% |  | 19.6 kg | 10.4 kg lighter |
| [Sigenergy Sigen Hybrid 10.0 TP2](https://comparepv.com/inverter/sigenergy-sigen-hybrid-10-0-tp2) | 10 kW | 98.5% | 2 | 19.5 kg | 10.5 kg lighter |
| [HYXiPower HYX-H10K-HSA2](https://comparepv.com/inverter/hyxipower-hyx-h10k-hsa2) | 10 kW | 98.2% |  | 38.0 kg | -0.5 pp efficiency, 8.0 kg heavier |
| [HYXiPower HYX-H10K-HT](https://comparepv.com/inverter/hyxipower-hyx-h10k-ht) | 10 kW | 98.2% | 2 | 34.0 kg | -0.5 pp efficiency, 4.0 kg heavier |
| [Growatt MOD 10KTL3-XH](https://comparepv.com/inverter/growatt-mod-10ktl3-xh) | 10 kW | 98.1% | 2 | 14.0 kg | -0.6 pp efficiency, 16.0 kg lighter |
| [Growatt MOD 10KTL3-HU](https://comparepv.com/inverter/growatt-mod-10ktl3-hu) | 10 kW | 98.1% | 3 | 20.0 kg | -0.6 pp efficiency, 10.0 kg lighter |
| [Huawei SUN2000-10KTL-M1](https://comparepv.com/inverter/huawei-sun2000-10ktl-m1) | 10 kW | 98.1% | 2 | 17.0 kg | -0.6 pp efficiency, 13.0 kg lighter |
| [Huawei SUN2000-10KTL-M1 (High current version)](https://comparepv.com/inverter/huawei-sun2000-10ktl-m1-high-current-version) | 10 kW | 98.1% | 2 | 17.0 kg | -0.6 pp efficiency, 13.0 kg lighter |


---

Source: https://comparepv.com/inverter/sigenergy-sigenstor-neo-ec-10-0-tp

