---
title: "Sigenergy Sigen Hybrid 12.0 TP2 Hybrid Inverter: Specs & Datasheet | ComparePV"
description: "Sigenergy Sigen Hybrid 12.0 TP2 12 kW hybrid inverter. Specs: 98.6% European efficiency, 2 MPPT, 1100 V max DC input, 19.5 kg."
source: "https://comparepv.com/inverter/sigenergy-sigen-hybrid-12-0-tp2"
updated: 2026-11-05
---

# Sigenergy Sigen Hybrid 12.0 TP2


## Identity

- **Manufacturer:** Sigenergy
- **Model:** Sigen Hybrid 12.0 TP2
- **Series:** Sigen Hybrid
- **Rated AC power:** 12 kW
- **Type:** Hybrid
- **Phases:** Three-phase
- **Battery port:** yes


## How it compares

Compared against 839 inverters from 6 to 12 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 98.6% | 97.5% | Strong - top 1% | 5 |
| MPPT trackers | 2 | 2 | Typical | 145 |
| Max DC input voltage | 1100 V | 800 V | Strong - top 9% | 1 |
| Weight per kW | 1.6 | 3.0 | Strong - top 11% | 86 |
| Warranty | - | 5 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 12 kW
- **Max apparent power:** 13.20 kVA
- **Phases:** Three-phase
- **Nominal AC voltage:** 400 V
- **Max AC current:** 20.1 A
- **Grid frequency:** 50 Hz
- **Power factor:** 0.8 leading - 0.8 lagging
- **Harmonic distortion (THD):** 3.0 %


### PV input

- **Max DC input power:** 24.00 kW
- **Max DC voltage:** 1100 V
- **MPPT voltage range:** 160 to 1000 V
- **Start-up voltage:** 180 V
- **MPPT trackers:** 2
- **Max input current per MPPT:** 16.0 A
- **Max short-circuit current per MPPT:** 22.0 A


### Efficiency

- **European efficiency:** 98.6 %
- **Max efficiency:** 99.0 %


### Battery

- **Battery port:** Yes
- **Battery voltage:** 600-900 V


### Physical

- **Dimensions:** 568 × 477 × 99 mm
- **Weight:** 19.5 kg
- **Enclosure:** IP66
- **Cooling:** natural
- **Noise:** 25 dB
- **Operating temperature:** -30 to 60 °C
- **Max humidity:** 100 %
- **Max altitude:** 4000 m


### Connectivity and protection

- **Interfaces:** Wi-Fi, Ethernet
- **Protocols:** WLAN, Fast Ethernet, RS485, Sigen CommMod (4G/3G/2G)
- **Protection:** AFCI, Surge protection


### Warranty and certificates

- **Certifications:** IEC/EN 62109-1, IEC/EN 62109-2, IEC/EN 61000-6-1, IEC/EN 61000-6-2


### Pros

- **Battery-ready - expandable without hardware swap** - The inverter can be commissioned as a grid-tied device and paired with a SigenStor battery at any later point without stopping energy production or replacing the inverter. This spreads capital outlay over time and reduces risk for customers still undecided about storage.
- **High DC/AC oversizing ratio** - Distributor data shows maximum PV input power reaching up to twice the AC rating (e.g., ~32 kWp DC for the 20 kW model, or 40 kW DC for the 25 kW variant), allowing more panel capacity than inverter rating and higher energy yield in low-irradiance conditions.
- **Up to 4 independent MPPTs** - Higher-tier three-phase models (5-25 kW) feature up to four MPPT trackers, improving performance on multi-plane roofs, varying azimuths, or partial shading - unlike many competing hybrid inverters in this segment limited to 2 MPPTs.
- **IP66 enclosure with smart cooling** - IP66 ingress protection combined with intelligent air cooling enables outdoor installation across a wide range of weather conditions, removing the need for a dedicated technical room.
- **Remote management and multi-channel monitoring** - Connectivity via WLAN, Ethernet, RS485, and LTE paired with the manufacturer's app provides flexible monitoring and energy management - useful for both residential and small commercial installations without constant on-site supervision.


### Cons

- **Short market track record** - Sigenergy was founded in 2022, meaning at most ~3-4 years of field operating data - substantially less than tier-1 manufacturers like Huawei, SMA, or Fronius, which have 15-30 years of history and long-term failure-rate statistics.
- **Ecosystem heavily tied to SigenStor** - Full energy storage functionality is designed around the proprietary SigenStor battery; native integration with third-party storage systems is not supported, limiting component choice flexibility and price competitiveness.


## About this series

The Sigen Hybrid series comprises Sigenergy's three-phase hybrid inverters built for installations designed to grow alongside the owner's needs. Their defining trait is a **battery-ready design** - the inverter can be commissioned right away as a standalone on-grid unit, with a SigenStor battery added at any later point without replacing hardware or interrupting energy production. This makes the series a fit for anyone wanting to spread out investment costs or still undecided about adding storage. A generous DC/AC oversizing ratio lets installers connect more PV array power than the inverter's rated output, boosting energy yield during low-irradiance periods and lowering the installation's lifecycle LCOE. With **up to four independent MPPT trackers**, the inverter handles multi-orientation roofs, varying tilt angles, and partial shading with ease. The unit is housed in an **IP66-rated enclosure** with smart air cooling, allowing outdoor mounting across a wide operating temperature range. The series also stands out for its **modular compatibility with SigenStor battery packs** and **smart, AI-driven energy management** accessible through WLAN, Ethernet, RS485, or LTE communication, simplifying remote monitoring for homes and small businesses.


## Questions


### Can the Sigen Hybrid inverter be installed without a battery and have energy storage added later?

Yes, this is one of the series' key advantages. The Sigen Hybrid inverter can be commissioned immediately as an on-grid device, with no battery, and a SigenStor battery can be added at any later point. This requires no inverter replacement, no interruption of energy production, and no changes to the existing PV installation, letting owners spread the investment over time.


### How many MPPT trackers does the Sigen Hybrid inverter have and what does that mean in practice?

The Sigen Hybrid series features up to four independent MPPT trackers, depending on the model. In practice, this means panels facing different directions, spread across multiple roof planes with different tilt angles, or even partially shaded strings, can be connected without significantly reducing the overall energy yield of the system.


### What is the IP rating of the Sigen Hybrid inverter and can it be mounted outdoors?

The inverter housing has an IP66 protection rating and uses smart air cooling. This makes it suitable for outdoor mounting on a building facade, across a wide temperature range and in conditions of high humidity or dust, without needing a separate shelter or technical room.


### Can the Sigen Hybrid inverter accept more solar panel power than its rated output?

Yes, the unit allows a high DC/AC oversizing ratio, meaning more PV panel power can be connected than the inverter's nominal output. This oversizing increases energy yield during periods of weaker sunlight, such as mornings, afternoons and winter months, shortening the payback period and lowering the lifetime cost of energy from the system.


### How can the Sigen Hybrid inverter be monitored remotely?

The inverter communicates via WLAN, Ethernet, RS485, and LTE, with real-time data on energy production, consumption, and system status available in the Sigenergy mobile app. This lets owners of homes or small businesses track system performance remotely without needing to be physically present at the device.


### Is the Sigen Hybrid inverter compatible with different capacities of SigenStor batteries?

Yes, the inverter is designed for modular compatibility with SigenStor batteries, allowing storage capacity to be matched to current energy needs. If consumption increases later, additional battery modules can be added without replacing the inverter.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/1780314912954727-3b85ef2a54a0.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [Sigenergy SigenStor Neo EC 12.0 TP](https://comparepv.com/inverter/sigenergy-sigenstor-neo-ec-12-0-tp) | 12 kW | 98.7% |  | 30.0 kg | 10.5 kg heavier |
| [Growatt MID 12KTL3-XH](https://comparepv.com/inverter/growatt-mid-12ktl3-xh) | 12 kW | 98.5% |  | 31.0 kg | 11.5 kg heavier |
| [RCT Power 12.0](https://comparepv.com/inverter/rct-power-12-0) | 12 kW | 98.4% | 2 | 35.0 kg | 15.5 kg heavier |
| [Huawei SUN5000-12K-MAP0](https://comparepv.com/inverter/huawei-sun5000-12k-map0) | 12 kW | 98.2% | 2 | 21.0 kg | -0.4 pp efficiency, 1.5 kg heavier |
| [Huawei SUN2000-12KTL-M1 (High current version)](https://comparepv.com/inverter/huawei-sun2000-12ktl-m1-high-current-version) | 12 kW | 98.2% | 2 | 17.0 kg | -0.4 pp efficiency, 2.5 kg lighter |
| [Huawei SUN2000-12K-MAP0](https://comparepv.com/inverter/huawei-sun2000-12k-map0) | 12 kW | 98.2% | 2 | 21.0 kg | -0.4 pp efficiency, 1.5 kg heavier |
| [Huawei SUN2000-12KTL-M1](https://comparepv.com/inverter/huawei-sun2000-12ktl-m1) | 12 kW | 98.2% | 2 | 17.0 kg | -0.4 pp efficiency, 2.5 kg lighter |
| [HYXiPower HYX-H12K-HSA2](https://comparepv.com/inverter/hyxipower-hyx-h12k-hsa2) | 12 kW | 98.2% |  | 38.0 kg | -0.4 pp efficiency, 18.5 kg heavier |


---

Source: https://comparepv.com/inverter/sigenergy-sigen-hybrid-12-0-tp2

