---
title: "Sigenergy 125M1-HYA Hybrid Inverter: Specs & Datasheet | ComparePV"
description: "Sigenergy 125M1-HYA 125 kW hybrid inverter. Specs: 98.3% European efficiency, 1100 V max DC input, 95.0 kg."
source: "https://comparepv.com/inverter/sigenergy-125m1-hya"
updated: 2026-11-05
---

# Sigenergy 125M1-HYA


## Identity

- **Manufacturer:** Sigenergy
- **Model:** 125M1-HYA
- **Series:** Sigen M1-HYA
- **Rated AC power:** 125 kW
- **Type:** Hybrid
- **Phases:** Three-phase
- **Battery port:** yes


## How it compares

Compared against 238 inverters from 100 to 500 kW. Ranks are within that class.


| Measure | This inverter | Class median | Standing | Rank in class |
| --- | --- | --- | --- | --- |
| European efficiency | 98.3% | 98.5% | Typical | 113 |
| MPPT trackers | - | 8 |  |  |
| Max DC input voltage | 1100 V | 1100 V | Typical | 113 |
| Weight per kW | 0.8 | 0.7 | Typical | 172 |
| Warranty | - | 5 yrs |  |  |


## Specification


### AC output

- **Rated AC power:** 125 kW
- **Max AC power:** 137.50 kW
- **Max apparent power:** 137.50 kVA
- **Phases:** Three-phase
- **Nominal AC voltage:** 400 V
- **Max AC current:** 208.9 A
- **Power factor:** 0.8 leading - 0.8 lagging


### PV input

- **Max DC input power:** 220.00 kW
- **Max DC voltage:** 1100 V
- **MPPT voltage range:** 160 to 1000 V
- **Start-up voltage:** 180 V
- **Max input current per MPPT:** 40.0 A
- **Max short-circuit current per MPPT:** 60.0 A


### Efficiency

- **European efficiency:** 98.3 %
- **Max efficiency:** 98.6 %


### Battery

- **Battery port:** Yes
- **Max charge current:** 180.0 A
- **Max discharge current:** 180.0 A


### Physical

- **Dimensions:** 668 × 999 × 340 mm
- **Weight:** 95.0 kg
- **Enclosure:** IP66
- **Cooling:** forced-air
- **Operating temperature:** -30 to 60 °C
- **Max humidity:** 100 %
- **Max altitude:** 5000 m


### Connectivity and protection

- **Interfaces:** Wi-Fi, Ethernet
- **Protocols:** WLAN, Fast Ethernet, RS485, Sigen CommMod (4G/3G/2G)
- **Protection:** AFCI, Surge protection


### Warranty and certificates

- **Certifications:** IEC/EN 62109-1, IEC/EN 62109-2, IEC/EN 61000-6-1, IEC/EN 61000-6-2


### Pros

- **Flexible battery-ready expansion** - The inverter is fully battery-ready and integrates with the SigenStack C&I battery system, allowing storage to be added to an existing PV plant without replacing the inverter. This lowers total investment cost spread over time compared with models requiring an inverter swap when upgrading to PV+BESS.
- **Built-in EMS with parallel operation up to 100 units** - The integrated energy management system supports parallel operation of up to 100 inverters without an additional data logger, substantially simplifying and reducing the cost of building large commercial-scale plants compared with solutions requiring an external controller.
- **AFCI arc-fault protection up to 500 m** - Per available datasheets (global and Australian 50-125 kW versions), the inverter detects arc faults at distances up to 500 m, clearly exceeding the typical 50-100 m range of competing C&I inverters, which matters for large rooftop and ground-mount installations.
- **IP66 rating with a lighter, compact design** - IP66 ensures reliable outdoor operation regardless of weather conditions, and a lighter, smaller enclosure than the previous generation (the 80 kW model weighs ~81 kg) eases transport and installation at hard-to-access industrial sites.
- **Extended warranty up to 10 years** - Standard warranty is 5 years, but once the plant is connected to the Sigen Cloud platform an extended 10-year coverage is available across the 50-125 kW lineup, which is competitive against many C&I manufacturers whose standard offering is only 5 years.


### Cons

- **No backup function on some variants** - Datasheets for certain power ratings (e.g., 80 kW, 125 kW) indicate no backup/off-grid operation mode, limiting the series' usefulness in applications requiring emergency power despite SigenStack battery integration.
- **Short market track record** - Sigenergy was founded in 2022 and lacks a multi-year field track record, unlike established tier-1 C&I manufacturers such as Huawei, Sungrow, or SMA, which may matter when assessing long-term service and support risk.
- **Inconsistent, non-transparent pricing** - Prices for individual power variants vary significantly by market and distributor (e.g., roughly £4,000 to over £4,400 net in the UK for the 80-110 kW models), and the manufacturer does not publish a unified MSRP, making quick cost comparisons against competitors difficult for investors.


## About this series

The Sigen M1-HYA series comprises three-phase commercial and industrial (C&I) hybrid inverters engineered for flexible expansion of PV systems with energy storage. The unit is **battery ready**, meaning a solar installation can be upgraded into a PV+BESS system at any time without replacing the inverter, significantly lowering the cost of phased investment. A smaller, lighter enclosure than previous generations makes transport and installation easier, even in hard-to-access industrial sites. The inverter features a **built-in energy management system (EMS)** that supports parallel operation of up to 100 units without the need for an additional data logger, simplifying the build-out of large commercial solar farms. Safety is reinforced by **industry-leading 600-meter arc-fault circuit interrupter (AFCI) protection**, essential for extensive rooftop and ground-mounted arrays. Fully networked communication enables rapid commissioning and remote monitoring, while the **IP66 ingress protection rating** ensures reliable outdoor operation regardless of weather conditions. With multiple MPPT inputs and seamless integration with the SigenStack battery system, the M1-HYA series is a strong fit for investors and installers building scalable, safe PV installations for businesses and industry.


## Questions


### What does it mean that the Sigen M1-HYA inverter is "battery-ready", and can I add energy storage later?

Yes, this is one of the series' key advantages. The Sigen M1-HYA can first be installed as a standard PV-only inverter, and a battery storage system (e.g. SigenStack) can be added at any later point without replacing the unit. This lets businesses spread the investment over time and avoids rebuilding the system when they decide to add storage in the future.


### How many Sigen M1-HYA units can be combined in a single solar farm installation?

The built-in Energy Management System (EMS) supports parallel operation of up to 100 units without a separate data logger. In practice, this means large commercial and industrial solar farms don't need a separate master controller - monitoring and coordination between inverters are handled natively, lowering costs and speeding up commissioning.


### What's the difference between the 50 kW, 80 kW, and 125 kW variants in the M1-HYA series?

The M1-HYA series spans 50 to 125 kW models, differing mainly in MPPT count and maximum DC voltage. Smaller units (e.g. 50 kW) typically have 4 MPPT trackers, while larger ones (above 80 kW) feature up to 6-8 MPPTs with 2 PV strings per tracker. The right choice depends on system size and the number of connected string circuits on the roof or ground mount.


### What is the 600-meter AFCI arc-fault protection and why does it matter?

AFCI detects dangerous electrical arcs, often caused by damaged DC wiring, which can lead to fire. A detection range of 600 meters means the inverter effectively monitors even very large rooftop or ground-mount installations typical of industrial sites, where PV cables run long distances from the inverter.


### Can the Sigen M1-HYA inverter be installed outdoors without extra shelter?

Yes, the enclosure has an IP66 rating, meaning full protection against dust and powerful water jets, so the unit can be mounted outdoors - on a building facade, a ground-mount structure, or near storage - without additional rain protection. Its lighter, more compact housing than previous generations also makes it easier to install in hard-to-reach industrial sites.


### What warranty applies to the Sigen M1-HYA inverter series?

Sigenergy offers a standard manufacturer warranty of 10 years on M1-HYA series inverters, with an optional extension to 15 years depending on market and distributor. It's worth confirming the exact terms with a local reseller, since warranty conditions can vary by country and specific model within the 50-125 kW lineup.


## Datasheet

[Manufacturer datasheet (PDF)](https://comparepv.com/datasheets/inverters/1783648525827_8fa03841-8bea-49d8-890e-167f1f088516-086cc36557c1.pdf)


## Alternatives


| Inverter | Rated AC | Euro efficiency | MPPT | Weight | Difference |
| --- | --- | --- | --- | --- | --- |
| [Sigenergy 125M1-HYB](https://comparepv.com/inverter/sigenergy-125m1-hyb) | 125 kW | 98.3% |  | 108.0 kg | 13.0 kg heavier |
| [Deye SUN-125K-SG02HP3-EU-GM10](https://comparepv.com/inverter/deye-sun-125k-sg02hp3-eu-gm10) | 125 kW | 98.1% | 10 | 161.7 kg | 66.7 kg heavier |
| [FoxESS H3-125-Plus](https://comparepv.com/inverter/foxess-h3-125-plus) | 125 kW | 98.1% |  | 120.0 kg | 25.0 kg heavier |
| [FoxESS P3-125-Plus](https://comparepv.com/inverter/foxess-p3-125-plus) | 125 kW | 98.1% |  | 120.0 kg | 25.0 kg heavier |
| [HYXiPower HYX-H125K-ET](https://comparepv.com/inverter/hyxipower-hyx-h125k-et) | 125 kW | 98.0% |  | 95.0 kg | Similar on paper |
| [SAJ CH3-125K-T8](https://comparepv.com/inverter/saj-ch3-125k-t8) | 125 kW | 97.5% | 2 | 145.0 kg | -0.8 pp efficiency, 50.0 kg heavier |
| [Ginlong Solis S6-EH3P125K10-NV-YD-H](https://comparepv.com/inverter/ginlong-solis-s6-eh3p125k10-nv-yd-h) | 125 kW | 97.2% | 10 | 170.0 kg | -1.1 pp efficiency, 75.0 kg heavier |
| [GoodWe GW125-PCS-N-G10](https://comparepv.com/inverter/goodwe-gw125-pcs-n-g10) | 125 kW |  |  | 80.0 kg | 15.0 kg lighter |


---

Source: https://comparepv.com/inverter/sigenergy-125m1-hya

